• The Korea Journal of Herbology
• /
• v.28 no.6
• /
• pp.9-14
• /
• 2013

Objectives : Cnidii Fructus is prescribed as the fruit of Cnidium monnieri (L.) Cusson or Torilis japonica (Houtt.) DC. in Korea pharmacopoeia. Although there are differences in the composition of useful components, two species have been used without distinction. In order to discriminate them, DNA sequencing and taste pattern analysis were used in this study. Methods : Primers ITS 1 and ITS 4 were used to amplify the intergenic transcribed spacer(ITS) region of nuclear ribosomal DNA from seven T. japonica and six C. monnieri samples. Taste pattern of samples were measured by using taste-sensing system SA402B equipped with five foodstuff sensors(CT0, C00, AAE, CA0, and AE1). The five initial taste(sourness, bitterness, astringency, umami, and saltiness) and three aftertaste(aftertaste of bitterness, astringency, and umami) of two species were compared. Results : According to the results of ITS region sequence analysis, two species showed 94 base pairs differences. The similarity of two sequences was 85%. From the taste pattern analysis, sourness, bitterness, aftertaste of bitterness(aftertaste-B), and umami showed a different pattern. Especially, bitterness and aftertaste-B of C. monnieri were significantly higher than T. japonica. In addition, two species were shown to have two markedly different clustering by these two flavors. Conclusion : T. japonica and C. monnieri were effectively discriminated using DNA sequencing and taste pattern analysis. These methods can be used to identify the origin of traditional medicine in order to maintain therapeutic efficacy.

• Elastomers and Composites
• /
• v.43 no.3
• /
• pp.183-190
• /
• 2008

In this study, we have investigated mechanical properties and scratch resistance of polypropylene compounds by two types of masterbatch with different molecular weight of PP. Masterbatches were prepared with polypropylene(PP) and polydimethylsiloxane(PDMS) by melt mixing. Mechanical properties and scratch behavior were examined with UTM and polarizing microscope. The morphology surface of grain pattern was investigated Color 3D Laser Scanning Microscope. Mechanical properties of two masterbatches containing PP compounds showed a little bit difference in accordance with amount of M/B. Scratch resistance was much improved by adding masterbatches used high-molecular weight PP. Scratch resistance was excellent when grain pattern of the surface is deep, large, round and irregular.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.22 no.1
• /
• pp.57-67
• /
• 2018

Objectives The objective of this study is to examine the interpretability of the questionnaire-based pattern identification in terms of biosignals. For this purpose, we investigate the relationship between electrochemical skin conductance (ESC) and Qi-Blood-Yin-Yang Deficiency Questionnaire (QBYY-Q) in diabetic patients. Methods A total of 40 patients with diabetes mellitus answered the QBYY-Q and their ESC were measured by SUDOSCAN device (a diabetes screening device, France). To analyze the relationship between QBYY-Q and ESC, ANOVA analysis and Scheffe test were performed and Pearson correlation coefficients were obtained. Results Of the 40 diabetic patients, 23 (57.5%) were males and 17 (42.5%) were females. According to the QBYY-Q, 9 patients were classified into Qi deficiency pattern (QD), 9 patients were Blood deficiency pattern (BD), 10 patients were Yin deficiency pattern (YiD) and 12 patients were Yang deficiency pattern (YaD). Demographic information (age, body mass index, duration of illness, etc.), signs of vitality (blood pressure, body temperature, etc.), fasting plasma glucose and glycated hemoglobin were not significantly different in each deficiency pattern. The ESC of the right leg was significantly lower in the BD group compared to the YiD group (p<0.022). Pearson's correlation coefficient was negatively correlated with the BD questionnaire score (r=-0.343, p <0.05). Finally, ESC showed a positive correlation with hemoglobin and erythrocyte levels in all limbs (r=0.483, p<0.01). Conclusions We showed that ESC could be used to classify the Deficiency pattern identifications in diabetic patients. Especially, the ESC was significantly lower in the BD group and was negatively correlated with the BD scores. It implies the potential utility of the ESC to understand the BD in terms of modern biosignals.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.36 no.3
• /
• pp.94-99
• /
• 2022

The discovery of biomarkers related to pattern identification (PI), the core diagnostic theory of Korean medicine (KM), is one of the methods that can provide objective and reliable evidence by applying PI to clinical practice. In this study, 40 diabetic patients and 41 healthy control subjects recruited from the Korean medicine clinic were examined to determine the human electrical response related to the deficiency pattern, a representative pattern of diabetes. Qi-Blood-Yin-Yang deficiency pattern scores, which are representative deficiency patterns for diabetes mellitus, were obtained through a questionnaire with verified reliability and validity, and the human electrical response was measured non-invasively using a bioimpedance meter. In ANCOVA analysis using gender as a covariate, the 5 kHz frequency resistance and 5-250 kHz frequency reactance were significantly lower in the diabetic group than in non-diabetic control group. In addition, the multiple regression analysis showed a positive correlation (R2=0.11~0.19) between the Yang deficiency pattern score and resistance value for the diabetic group; the correlation was higher at higher frequencies of 50kHz (R2=0.18) and 250kHz (R2=0.19) compared to 5kHz(R2=0.11). In contrast, there was no such significant association in the control group. It implies that bioimpedance resistance measured at finite frequencies may be useful in predicting Yang deficiency, which is closely related to diabetic complications by reflecting the decrease in body water content and metabolism. In the future, large-scale planned clinical studies will be needed to identify biomarkers associated with different types of PI in diabetes.

• Design & Manufacturing
• /
• v.17 no.2
• /
• pp.22-26
• /
• 2023

As Light-Emitting Diodes(LEDs) continue to advance in performance, their application in automotive lamps is increasing. Automotive LEDs utilize light guides not only for aesthetics but also to control light quantity and direction. Light guides employ patterns of a few hundred micrometers(㎛) to regulate the light, and the surface roughness(Ra) of these patterns can reach tens of nanometers(nm). Given that these light guides are produced through injection molding, mold processing technology with high surface quality micro-patterns is required. This study serves as a preliminary investigation into the development of high surface quality micro-pattern processing technology. It examines the surface roughness of the workpiece based on the cutting direction of the pattern and the cutting fluid type when cutting micro-patterns on STAVAX steel using cubic Boron Nitride(cBN) tools. The experiments involved machining a step-shaped micro-pattern with a height of 60 ㎛ and a pitch of 400 ㎛ in a 22×22 mm area under identical cutting conditions, with only the cutting direction and cutting fluid type being varied. The machining results of four cases were compared, encompassing two cases of cutting direction(parallel to the pattern, orthogonal to the pattern) and two cases of cutting fluid type (flood, mist). Consequently, the Ra value was found to be the highest(Ra 128.33 nm) when machining with the flood type in parallel to the pattern, while it was the lowest(Ra 95.22 nm) when machining with the mist type orthogonal to the pattern. These findings confirm that there is a difference of up to 25.8 % in the Ra value depending on the cutting direction and cutting fluid type.

• School Mathematics
• /
• v.9 no.2
• /
• pp.313-326
• /
• 2007

Recently in algebra curriculum, to recognizes and explains general nile expressing patterns is presented as the one alternative and is emphasized. In the seventh School Mathematic Curriculum regarding 'regularity and function' area, in elementary school curriculum, is guiding pattern activity of various form. But difficulty and problem of students are pointing in study for learning through pattern activity. In this article, emphasizes generalization process through research activity of pictorial/geometric pattern that is introduced much on elementary school mathematic curriculum and investigates various approach and strategy of student's thinking, state of symbolization in generalization process of pictorial/geometric pattern. And discusses generalization of pictorial/geometric pattern, difficulty of symbolization and suggested several proposals for research activity of pictorial/geometric pattern.

• Human Ecology Research
• /
• v.54 no.3
• /
• pp.279-292
• /
• 2016

This research predicted the fit of the basic bodice patterns worn on adolescent girls' 3-dimensional scanned bodies. Six 3-dimensional scanned bodies were selected from the sixth Size Korea data. Each of them had good body posture and represented one of the three garment sizes: 79-160, 82-160, and 85-160. Experimental basic bodice patterns were drafted by three basic bodice pattern making methods. The fit of the basic bodice pattern was analyzed by the CLO 3D virtual clothing system. The results showed that the experimental basic bodice patterns did not fit well at the neck, shoulder, and back for adolescent girls. The fit of the basic bodice patterns varied by pattern making method or size. The basic bodice pattern A with the waist darts ending above the breast line showed the best fit among the three different types of experimental pattern. Among the three sizes 79-160, 82-160, and 85-120, size 79-160 basic bodice pattern showed the worst fit for adolescent girls. The results show that the placement and size of the bodice darts affect the basic bodice pattern fit. The basic bodice pattern making method of size 79-160 for adolescent girls should be studied in a future study.

• Korean Journal of Oriental Medicine
• /
• v.14 no.2
• /
• pp.41-46
• /
• 2008

The study was to investigate the agreement rate between the statistical diagnosis of pattern identification by discriminant analysis and the clinical diagnosis of pattern identification by medical specialist in obese patients with BMI$\geqq$23. The agreement rate of deficiency of the spleen, phlegm-retention, deficiency of Yang, retention of undigested food, stagnation of liver Gi, and blood stagnation are 0.40, 0.33, 0.52, 0.76, 0.71, and 0.66, respectively and accuracy rate and prediction rate using linear discriminant function are 0.59 and 0.61, respectively. Therefore, the complementary management in CRF questionnaires and/or consultation from experts will improve the accuracy and prediction rate, which will be helpful for pattern identification of obesity by clinical experts.

• Journal of Korea Multimedia Society
• /
• v.9 no.9
• /
• pp.1118-1130
• /
• 2006

Existed pattern analysis algorithms in data streams environment have researched performance improvement and effective memory usage. But when new data streams come, existed pattern analysis algorithms have to analyze patterns again and have to generate pattern tree again. This approach needs many calculations in real situation that needs real time pattern analysis. This paper proposes a method that continuously analyzes patterns of incoming data streams in real time. This method analyzes patterns fast, and thereafter obtains real time patterns by updating previously analyzed patterns. The incoming data streams are divided into several sequences based on time based window. Informations of the sequences are inputted into a hash table. When the number of the sequences are over predefined bound, patterns are analyzed from the hash table. The patterns form a pattern tree, and later created new patterns update the pattern tree. In this way, real time patterns are always maintained in the pattern tree. During pattern analysis, suffixes of both new pattern and existed pattern in the tree can be same. Then a pointer is created from the new pattern to the existed pattern. This method reduce calculation time during duplicated pattern analysis. And old patterns in the tree are deleted easily by FIFO method. The advantage of our algorithm is proved by performance comparison with existed method, MILE, in a condition that pattern is changed continuously. And we look around performance variation by changing several variable in the algorithm.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.1
• /
• pp.53-68
• /
• 2015

The purpose of this study is to analyze check pattern of nail art from 2011 to 2013. The results of this study are as follows; 1) Check pattern of nail art is total 257 patterns, and there are 84 argyle, 29 tartan, 24 harlequin, 24 over, 23 window-pane, 15 stitcheds, 13 hound tooth, 10 block, 10 madras, 8 gingham, 8 gradation, 7 shepherd, and 2 tattersall check patterns. Through this result, in nail art, the relatively simple patterns such as a vertical pattern, a horizontal pattern, and cross or overlap diagonal line are used more than elaborate and complex check patterns of a fibrous tissue from a weaving process. 2) In check pattern of nail art, N-affiliated color and R-affiliated color are remarkably well-used, because of the effects of argyle, tartan, window-pane, harlequin, stitched, over, and hound tooth check patterns used the most during the past three years. Especially, most tartan, harlequin, over, and hound tooth check patterns use their own special colors such as R-affiliated colors and N-affiliated colors as it is, and argyle, window-pane, stitched, and over check patterns use well by arranging N-affiliated colors and R-affiliated colors. 3) The most used expressive technique is hand painting to express check pattern in nail art, because new products related to UV gel are well launched. These materials can draw fine line that is hard to express by existing polish easily and simply, and not only have set quickly hard, so procedure time is very short, so it is compatible to draw check pattern personally, but also it is well covered, so check pattern is more clearly expressed.