• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.783-787
• /
• 2014

This paper presents an improved vertical alignment nematic liquid crystal mode characterized by the protrusions or slits of the top substrate and additional stripe type common electrodes with polarity switching of the bottom substrate to improve multi-domain vertically aligned (MVA) and patterned vertically aligned (PVA) nematic modes. MVA and PVA modes have disadvantages such as an LC disclination in the vicinity of the middle region of electrodes between the top and bottom protrusions in MVA mode or the top and bottom slits in PVA mode. Therefore, the stripe type common electrode generating a horizontal electric field and the protrusion or slit producing some pretilt of liquid crystals (LCs) were used to improve the LC disclination, which influences the transmittance and response speed. The simulation results showed that the proposed VA mode has higher transmittance than the MVA and PVA modes. As a result, the proposed VA mode can improve the response speed and transmittance remarkably, which makes it useful for upgrading the LCD display quality.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.297-300
• /
• 2007

Due to its impressive compression performance, the H.264 video coder is highlighted in the video communications industry, such as DMB (Digital Multimedia Broadcasting), PMP (Portable Multimedia Player), etc. The main bottleneck to use the H.264 coder lays in the computational complexity, i.e. five times more complex than the market leading MPEG-4 Simple Profile codec. In this paper, we propose the hierarchical mode decision method for intraframe coding for the reduction of the computation complexity of the encoder. By determining the mode group early, the propose algorithm can skip the computationally demanding computation in the mode decision. The proposed algorithm is composed of three steps: $16{\times}16$ mode decision, $4{\times}4$ mode-group decisions, and final mode decision among the selected mode group. The simulation results show that the proposed algorithm achieves 20% to 50% reduction in the computational complexity compared with the conventional algorithm.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1984.12a
• /
• pp.52-56
• /
• 1984

파동 이론에 의한 수중에서의 저주파 음파전달은 음향학적 경계 조건에 의해 결정되는 Normal Mode로 특징지어 진다. Normal Mode는 수층(Water Layer)뿐만 아니라 수직적으로 층상 구조인 해저 퇴적층(Subatrate)의 음향 특성을 포함하여 결정되는 파동 방정식의 해로서 이에 의해 수층 및 해저 퇴적층에서의 음압 분포와 감쇠를 계산할 수 있다. 본 논문은 저주파 음파 전달에 관한 Normal Mode 이론에 의하여 음원의 주파수와 해저 퇴적층에서의 음속 분포등에 따른 각 Mode의 음압 분포, 감쇠등에 관한 음향학적 해석으로 원거리까지 진행하는 수중 음파의 해저 퇴적층 투과 심도를 추출하였다.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1997.10a
• /
• pp.151-158
• /
• 1997

The main concern of numerical dynamic analysis of large structures is to find an acceptable solution with fewer mode shapes and less computational efforts. component mode method utilizes substructure technique to reduce the degrss of freedom but have a disadvantage to not consider the dynamic characteristics of loads. Ritz Vector method consider the load characteristics but requires many integrations and errors are accumulated. In this study, to prove the effectiveness of component mode method, Lanczos algorithm are introduced. To prove the effectiveness of this method, example structures areanalyzed and the results are compared with SAP90.

• Proceedings of the Optical Society of Korea Conference
• /
• 1999.08a
• /
• pp.216-217
• /
• 1999

A tapered ridge mode laser diode with increased spot size is designed and analyzed . The mode evolution concept is applied to design the taper and the method does not require regrowth or multiple-step etching technique. Three-dimensional BPM results show that the designed taper can transfer more than 97% of the mode power in the active region to the expanded mode.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.221-224
• /
• 2000

We consider one of robust controller, fuzzy-sliding mode controller dealing with model uncertainty, simplified representation of nonlinear system, changed parameters of plant. We propose fuzzy-sliding mode algorithm which provides control input that has system states approaching the choosed sliding surface. This fuzzy controller has a rule base to get initial states converged on sliding surface. This algorithm Is applied to a transfer function of DC motor to be modeled simply and do position control of DC motor due to system parameters. We compare fuzzy-sliding mode controller to both sliding mode controller and fuzzy controller to identify roust control.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.7
• /
• pp.492-499
• /
• 2008

The cooling load in winter is significant in many commercial buildings and hotels because of the usage of office equipments and the high efficiency of wall insulation. The development of a multi-heat pump that can cover heating and cooling simultaneously for each indoor unit is required. In this study, the performance of a multi-heat pump with 3-piping system was investigated as a function of refrigerant charge and its performance was analyzed in cooling mode, heating mode, and heat recovery mode. COP in the heating or cooling mode showed little dependence on refrigerant charge at overcharge conditions, while those were strongly dependent on refrigerant charge at undercharge conditions and outdoor inlet temperature. In the heat recovery mode, the performance of the system was very sensitive to charge amount at all conditions. Optimum charge amount in the heat recovery mode was 14% lower than that in the cooling mode at the standard condition because the refrigerant only passed the indoor units. It is required to store the excessive refrigerant charge in a storage tank to optimize the system performance at operating modes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.11
• /
• pp.1719-1732
• /
• 2009

A firm seeking to enter a foreign market must make an important strategic decision of which market entry mode to use. Because entry modes involve resource commitments, the initial choice by a firm on a particular entry mode is difficult to change without a considerable loss of time and money. Substantial prior research has been undertaken to explain why firms select a particular entry mode into global markets. However, there exists limited research on this area in the field of foreign apparel brands in Korea, although some research has analyzed influential entry mode factors when Korean textile and clothing companies went overseas. This study reviews prior research on the entry mode choice and analyzes the factors that influence the entry mode choice for 510 foreign clothing brands in Korea. Price range, clothing types, distribution strategy, and cultural distance were considered as influential determinants for different entry mode choices. Crosstabs with a chi-square test and logistic regression are used for analysis. This study shows that high-priced brands and luxury brands are associated with the export orientated entry mode in the Korean market. Brands that pursued the strategy of multiple distribution channels showed a preference for a licensing mode or direct investment over other entry modes, and brands from higher-cultural-distance countries entered the Korean clothing market by licensing mode. The findings of this study are appropriate for the strategic planning of foreign apparel intent on entering the Korean market or for Korean apparel firms planning to enter the global market.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.135-139
• /
• 2016

I propose a vector passive harmonic mode-locked fiber laser based on topological insulator Bi2Se3 interacting with a fiber taper with a diameter of 7 μm. The particles of topological insulator are deposited uniformly onto the fiber taper with light pressure effect. By incorporating the fabricated saturable absorber into an Er-doped fiber laser cavity, stable mode-locked fiber is obtained. Due to the intense evanescent field of the fiber taper, strong confinement of light enhances the nonlinearity of the laser cavity, and passive harmonic mode-locking is performed. I observe a maximum harmonic mode-locking of 356th, corresponding to a frequency of 3.57 GHz. The pulse duration is 824 fs, and the full width at half maximum of the spectrum is about 8.2 nm. The polarization dependent loss of the saturable absorber is ~ 2.5 dB in the wavelength range of the C band. As the cavity contains no other polarization dependent device, the mode-locked laser is functioning in the vector state. The harmonic order vs pump power is investigated. To the best of our knowledge, this report is the highest frequency mode-locked fiber laser based on Bi2Se3. Experimental results indicate that the topological insulator Bi2Se3 functioning with a thin fiber taper is effective for vector harmonic mode-locking.

• The Korean Journal of Applied Statistics
• /
• v.29 no.5
• /
• pp.787-806
• /
• 2016

Mixed-mode (MM) designs in which data are collected by different modes in one design have become increasingly popular. An MM data collection has several advantages such as reductions of coverage error, non-response and cost. However, MM designs may introduce mode effects that are confounded by selection effects and measurement effects, which can make MM data quality poor. In order to investigate mode effects, SRI implemented a concurrent mixed-mode experiment in 2014 where respondents could choose between a self-administrated Web survey and a self-administrated paper survey. This paper separately estimates selection effects and measurement effects. We found that measurement effects on some items are large.