• Physical Therapy Korea
• /
• v.13 no.4
• /
• pp.47-55
• /
• 2006

The purpose of this study was to compare the static balance of standing position between adolescent idiopathic scoliosis (AIS) and a normal group that were aged-matched. There were forty subjects included in this study. Twenty-seven healthy subjects (age, $13.9{\pm}1.2$ yrs; height, $161.9{\pm}7.5$ cm; weight, $52.2{\pm}7.7$ kg) and thirteen AIS subjects (age, $14.2{\pm}2.2$ yrs; height, $161.5{\pm}8.7$ cm; weight, $48.1{\pm}8.1$ kg) were participated in the study. The thirteen subjects in the AIS group had a major Cobb angle between $20.1^{\circ}$ and $49^{\circ}$. Each group was tested with the Balance Performance Monitor (BPM). The parameters for static balance were sway area, sway path, max velocity, mean balance, anterior-posterior angle, and left-right angle of each group with their eyes opened and again with their eyes closed. Both sides of the forward reach test and the lateral reach test were also performed on each group. Results from the BPM tested showed significantly increases in all parameters of static balance with those patients with AIS under the conditions where eyes were opened and closed. In the right and left forward reach test, there was no significant difference between normal and AIS groups. However, in the lateral reach test with right and left direction, there were significant differences between normal and AIS groups. For the normal subjects, there were significant differences in the parameters with sway path and anterior-posterior sway angle between the eyes opened and closed. However, there were no significant differences in the all parameters between eyes opened and closed for the AIS subjects. These results suggest that, balance programs could be used in the rehabilitation setting for intervention of AIS and evaluation of AIS. Further study is needed to measure many patients with AIS and other functional balance scales for clinical application.

• Water for future
• /
• v.29 no.3
• /
• pp.143-152
• /
• 1996

The hydraulics of flow within the covered reach of urban streams is very complicated due to the accumulation and interference effect of eddies around the multiple piers supporting the covering slab. An extensive experimental study is done to quantitatively estimate the backwater rise effect caused by various arrays of multiple piers. The factors governing the backwater rise are found out to be the contraction ratio due to the piers, Froude number of the flow, longitudinal pier spacing, and the length of the covered reach. For a single section of lateral pier arrays the effect of contraction ratio and Froude number on the backwater rise is analyzed and a multiple regression equation is derived. The effect of multiple piers, arrayed in both lateral and longitudinal directions, on the backwater rise is analyzed in terms of the contraction ratio, Froude number,longitudinal pier spacing and the total length of the covered reach. A multiple regression equation for the backwater rise estimation is proposed based on the experimental data collected in the present study.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.22 no.1
• /
• pp.149-177
• /
• 1994

This study is practically focussed on the derivation of the formula of the reach of the catchment of urban community parks and the reached distance to the parks. The hypotheses for the formula are as follows. a. The catchment of urban community parks can be dependent on the quantitative characteristics that urban community parks have substanial factors : the potential residential population of the proximate community to a park, park visitor's day and mean usetime per year. b. The distance to the urban park is a decided variable which can be percieved quantitatively by the researchers among the exogenous variables concerned with the mean usetime of the urban community park. The data for the variables were collected from the statistics, and the surveys for 9 parks of 4cities(Seoul, Chong-ju, Su-Won, Chon-an) in Korea, which were divided into on-site samples and off-site ones in 1991. The data were collected by questionaire surveys. A total of 548 questionaires of off-site surveys were completed by the residents in the enticing area of the parks. A total of 1053 questionaires of on-site surveys were completed by the visitors of the parks. The research could attempt to derive a formula, which was concerned with the reach of the catchment of urban community parks and the reached distance to the parks. It is testified(R2>0.8) that the numbers of mean usetime per year should be related with the reached distance from a visitor's house to a proximate park. The formula is analogized with an exponential function: {{{{ Mean Usetime per year=f(x)=Ae-BK+Ce-DK ear, X is reached distance from a visitor's house to a proximate park. A,B,C and D are parameters. And, the differences of the reach of the catchment of the parks are not only testified with resulting from the differences of the exogenous variables of qualitative characteristics differences of the parks, but also divided separately into spatial ranges. This formula will be able to anticipate the visitor's numbers of a planned urban community park.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.1
• /
• pp.27-34
• /
• 2013

Objectives: The purpose of this study is to calculate the worker-DNEL (Derived No Effect Level) values using the REACH guidance and compare the calculated DNELs with existing Korea occupational exposure limits (KOELs) for evaluation of the applicability of the worker-DNELs as provisional occupational exposure limits for chemicals that are not established KOELs in the workplace. Methods: The worker-DNELs for 46 chemicals among 113 hazardous substance requiring management were calculated using the REACH guidance, and a paired t-test was performed to see if there is any statistical difference between two lists (worker-DNELs vs KOELs). The ratios of KOELs over worker-DNELs were also calculated to compare the overall levels of two lists using the geometric means method. Results: The calculated worker-DNELs for 46 chemicals ranged from 0.001 to $329mg/m^3$ (GM= 6.9, GSD = 10.8), and appeared to be a significant difference between the worker-DNELs and the KOELs (p < 0.01). In addition, the ratios of KOELs over worker-DNELs ranged from 0.3 to 394 times (GM = 10.2, GSD = 3.9), indicating that the worker-DNELs were, on average, 27 times lower than the KOELs. Conclusions: Therefore, the study results show that the calculated worker-DNELs can be applied and used as provisional occupational exposure limits in the workplace in order to reduce worker exposures to chemicals and health risks, and manage potential worker exposures based on the precautionary principle through comprehensive chemical risk assessment.

• Advances in concrete construction
• /
• v.8 no.2
• /
• pp.155-163
• /
• 2019

The objective of this study was to derive a cementitious material for three-dimensional (3D) concrete printing that fulfills key performance functions, extrudability, buildability and bondability for 3D concrete printing. For this purpose, the rheological properties shown by different compositions of cement paste, the most fundamental component of concrete, were assessed, and the correlation between the rheological properties and key performance functions was analyzed. The results of the experiments indicated that the overall properties of a binder have a greater influence on the yield stress than the plastic viscosity. When the performance of a cementitious material for 3D printing was considered in relation with the properties of a binder, a mixture with FA or SF was thought to be more appropriate; however, a mixture containing GGBS was found to be inappropriate as it failed to meet the required function especially, buildability and extrudability. For a simple quantitative evaluation, the correlation between the rheological parameters of cementitious materials and simplified flow performance test results-time taken to reach T-150 and the number of hits required to reach T-150-in consideration of the flow of cementitious materials was compared. The result of the analysis showed a high reliability for the correlation between the rheological parameters and the time taken to reach T-150, but a low reliability for the number of hits needed for the fluid to reach T-150. In conclusion, among several performance functions, extrudability and buildability were mainly assessed based on the results obtained from various formulations from a rheological perspective, and the suitable formulations of composite materials for 3D printing was derived.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.2
• /
• pp.203-210
• /
• 2010

For the development of a better product which fits to the target user population, physical workloads such as reach and visibility are evaluated using digital human simulation in the early stage of product development; however, ergonomic workload assessment mainly relies on visual observation of reach envelopes and view cones generated in a 3D graphic environment. The present study developed a quantitative assessment method of physical workload in a digital environment and applied to the evaluation of a Korean utility helicopter (KUH) cockpit design. The proposed assessment method quantified physical workloads for the target user population by applying a 3-step process and identified design features requiring improvement based on the quantified workload evaluation. The scores of physical workloads were quantified in terms of posture, reach, visibility, and clearance, and 5-point scales were defined for the evaluation measures by referring to existing studies. The postures of digital humanoids for a given task were estimated to have the minimal score of postural workload by finding all feasible postures that satisfy task constraints such as a contact between the tip of the index finger and a target point. The proposed assessment method was applied to evaluate the KUH cockpit design in the preliminary design stage and identified design features requiring improvement. The proposed assessment method can be utilized to ergonomic evaluation of product designs using digital human simulation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.9
• /
• pp.1071-1078
• /
• 2015

This paper is a study of social media marketing as a structured four types of model in order to analyze and perform social media marketing effectively. In this paper we analyze cases of each types of social media marketing and suggest a new social media marketing evaluation methods by a combination of reach and people engaged in using facebook insight.

• Journal of the Ergonomics Society of Korea
• /
• v.21 no.2
• /
• pp.13-23
• /
• 2002

Human dummies are essential tools in the development of such products as vehicle have been actively used not only in reach and view field tests. but also in impact perception evaluations. This study attempted to obtain geometric and dynamic model body segments from Korean anthropometric data. The investigation focused on the de both human and dummy for the geometric and inertial properties. The dynamic modeli being suggested is based on rigid body dynamics using fifteen individual body segments by joins. The segments are connected at the locations representing the physical joint body so that each segment has its mass and moment of inertia. For visual three-dimensional graphic was used for easier implementation of the dumn applications. For applications, proposed Korean dummies Were used in dynamic crash and driver's view and reach test modules were developed in virtual environment.

• The Journal of Korea Robotics Society
• /
• v.5 no.4
• /
• pp.302-308
• /
• 2010

A gradient method can provide a global optimal path in indoor environments. However, the optimal path can be often generated in narrow areas despite a sufficient wide area which lead to safe navigation. This paper presents a novel approach to path planning for safe navigation of a mobile robot. The proposed algorithm extracts empty regions using a ray-casting method and then generates temporary waypoints in wider regions in order to reach the goal fast and safely. The experimental results show that the proposed method can generate paths in the wide regions in most cases and the robot can reach the goal safely at high speeds.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.89-92
• /
• 2006

This study has focused on the possibility for recycling of tailings from the Sangdong tungsten mine as powder of superfluidity self-compacting concrete. The experimental tests for slump-flow, time required to reach 500mm of slump flow(sec), time required to flow through V-funnel(sec) and filling height of U-box test(mm) were carried out in accordance with the specified by the Japanese Society of Civil Engineering(JSCE). The result of this study, in case of superfluidity self-compacting concrete mixed with tailings, slump-flow was decreased with increasing mixing ratio. But time required to reach 500mm of slump flow(sec), time required to flow through V-funnel(sec) and filling height of U-box test(mm) were satisfied a prescribed range.