Journal of the Korea Academia-Industrial cooperation Society
/
v.14
no.1
/
pp.436-444
/
2013
This article presents the dynamic response of nano-scale plates using the nonlocal continuum theory and higher-order shear deformation theory. The nonlocal elasticity of Eringen has ability to capture the small scale effects and the higher-order shear deformation theory has ability to capture the quadratic variation of shear strain and consequently shear stress through the plate thickness. The solutions of transient dynamic analysis of nano-scale plate are presented using these theories to illustrate the effect of nonlocal theory on dynamic response of the nano-scale plates. The relations between nonlocal and local theories are discussed by numerical results. Also, the effects of nonlocal parameters, aspect ratio, side-to-thickness ratio, size of nano-scale plate and time step on dynamic response are investigated and discussed. The amplitude and cycle increase when nonlocal parameter increase. In order to validate the present solutions, the reference solutions are used and discussed. The theoretical development as well as numerical solutions presented herein should serve as reference for nonlocal theories as applied to the transient dynamic analysis of nano-scale structures.
Korean Journal of Construction Engineering and Management
/
v.25
no.3
/
pp.17-26
/
2024
Quality management work at construction sites demands substantial time and effort, involving the preparation of documents in Excel, approval processes, and the execution of quality tests. These Excel-based tasks include printing quality test reports, performing quality tests, generating and approving test reports, and preparing management ledgers. This division of processes extends the duration of work and diminishes efficiency. Accordingly, a cloud-based construction site quality management system was developed to enhance the productivity of quality management work. The purpose of this study is to analyze the productivity of the construction site quality management system, which is in the early stages of implementation at construction sites. This study implemented the construction site quality management system at a road construction site and scrutinized subsequent alterations in the quality management workflow before and after the implementation. Additionally, a survey was conducted among quality control engineers to collect data on work time both before and after the introduction of the construction site quality management system. Based on the collected data, the Monte-Carlo simulation method was applied to analyze the productivity improvement effect of the construction site quality management system, and the results were presented. The results of this study can serve as foundational data for future research endeavors focused on the automation of quality management works.
This paper evaluates the effects of privatization and deregulation on the firm-specific efficiency and total factor productivity (TFP) growth in the Korean and Japanese railways. Using a stochastic frontier approach and a generalized translog functional form, the paper specifies the equation system consisting of a multiproduct variable cost function and input share equations which is estimated with Zellner's iterative seemingly unrelated regression and the corrected least squares method. The Korean and Japanese railway firms are assumed to produce three outputs (Shinkansen passenger-kilometers, incumbent railway passenger-kilometers, ton-kilometers of freight) using three input factors (labor, fuel, maintenance and rolling stock). A monetary value of the ways and fixed installations held by the railroad firm is also included as a quasi-fixed input. The empirical results indicate that the average estimate of cost inefficiency is 2.57% for the total sample and on the average, JNR and JR Kyushu are found to be worst efficient while the most efficient railway firm in the sample is JR West. Also the cost efficiency levels of seven JRs have been improved after the reform and privatization of JNR. The findings also indicate that TFP growth of the privately-owned JRs are higher than those of the government-owned KNR and JNR. Three-island JRs and JR Freight have slightly higher TFP growth than Honshu JRs as well. Thus, the results suggest that managerial autonomy and increased competition via deregulation have improved efficiency and TFP growth.
Journal of the Korean association of regional geographers
/
v.10
no.1
/
pp.83-95
/
2004
Chilgok District is a historical area, which has had a certain amount of development. It has its own regional characteristics originating from its isolation from the existing built up area of Daegu City by the Kumho River This study explores the historical development processes and pending development issues of Chilgok District. In 1640 after the Japanese invasion of Korea in 1592, the district upgraded into Chilgok Dohobu due to its importance as a transportation hub of Youngnamdaero(the main road of Youngnam province in Chosun Dynasty). In its early stages, the government office was located in Kasan fortress, later the of office was moved to Eupnae-Dong. The Chilgok district has experienced a developmental lag resulting from the office's removal to Waegwan, located on the Kyungbu railroad since 1914. Later, due to the increasing influence of nearby Daegu City, urbanization continued gradually. Finally in 1981 Chilgok district was officially incorporated into Daegu Metropolitan City. In the later 1980s, the housing land development project was applied into the district centered on the alluvial plain of Palgeo-Cheon(stream) of the Northern part of Taejun-Bridge. Although the old built up zone was excluded from public sector development projects, private sector development has made the zone a modern town. Now, Chilgok district has transformed into a high-density residential new town in which high-rise apartment complexes mingle with numerous houses. As the district has developed, traffic jams have become a hot issue and it is going to get worse than now as the development continues. To solve this problem, Daegu city needs to swiftly construct the fourth belt way and the third subway line.
Using a stochastic cost frontier approach(SCFA), this paper annually estimates the efficiency and productivity with same data in the papers which analyze the efficiency and productivity using data envelopment analysis(DEA) to compare the results and suggest the political findings of raising the efficiency and productivity for three publicly-owned rail transit properties. the Seoul Subway Corporation (SSC), the Seoul Metropolitan Electrified Railways Sector of Korea National Railroad (SMESRS) and the Busan Urban Transit Authority (BUTA). The results show that the results of SCFA are higher than DEA for efficiency and lower for productivity in that DEA regards the stochastic error and measurement error as the inefficiency contrary to SFCA. But the political findings from these results appears to be similar as follows. First, the productivity of the three properties should be first improved by using existing technologies efficiently and then by introducing new ones. Second, the three properties should improve the technical efficiency through reducing input quantities to raise their efficiency. Finally, all the three components of the productivity such as productive efficiency change, technical change, and scale change should be considered to evaluate their productivity more correctly.
In the case of railway facilities in cities such as a railway station or a bridge, the significance of design for reducing vibration and noise is getting more significant. The vibration control solution is in need especially for an elevated railway station to block vibration of a train and secondary noise effectively. Even though a vertical vibration isolation device is able to be applied effectively to railway facilities such as elevated railway stations which transfer vibration directly from a train to a structure, the development of the vertical device is much slower than a horizontal vibration isolation device. In this paper, a vibration isolation device using wedge type friction material which is currently developing to reduce train-induced vibration effectively is introduced and test results for verification of dynamic performance is also presented. The vibration test on a concrete structure equipped with the developed vibration isolation device is conducted through which the isolation performance and dynamic properties are verified and needs for improving the performance of the device is identified.
There has been much interest in optimizing the halting patterns of high-speed trains, for example by introducing more non-stop trains to supply faster train service to the passengers, which could later bring about a discussion about introducing new high speed train service with differentiated price and service. In general, halting patterns can be considered by constructing an efficient line plan, in which all demand should be covered and the total travel time can be reduced as much as possible. In this study, we present a two-step process based on two optimization models. One is to minimize total kilometers of trains to run on each route ; this will be done using a line planning model under the assumption of all-stop patterns. Then, in the next step, the all-stop patterns are optimally decomposed into several halting patterns in order to minimize the total travel time. We applied the two-step process to the latest demand data in order to develop KTX halting patterns as well as to determine the frequency of each line and compare the current line plan with the optimized one.
Kim, Jong Bum;Kim, Danbi;Noh, Sujin;Yoon, Kwan Hoon;Park, Duckshin;Lee, Jeong Joo;Kim, Jeongho
Particle and aerosol research
/
v.16
no.2
/
pp.49-59
/
2020
Various devices have been developed to the measurement of particulate matter pollutants, and Optical Particle Counter (OPC) that can be easily and quickly measured is widely used lately. The measured value by OPC is converted to weight concentration using the correction factor (CF). The calculation of CF is very important to improve the reliability and accuracy of OPC. In this study, the CF calculation study of light scattering laser photometer (model 8533, TSI) was carried out to measure in the atmospheric environment using 2 gravimetric devices and 3 light scattering laser photometer devices. Regression analysis and Tukey tests were used to significance the test of measurement devices. Measurements were carried out twice. There was a comparative analysis of measurement data between light scattering laser photometer and gravimetric devices in 1st measurement, and then the Evaluation of PM2.5 concentration corrected by CF performed in 2nd measurement. As a result of the significance analysis between light scattering laser photometer and gravimetric devices, the correlation between the same method was high, but the correlation between different methods was low. CF was calculated as 0.4258 based on the measurement results, and it is a similar level to previous studies at home and abroad. It is expected that these results can be used as basic data in the future study for air quality measurement research using light scattering laser photometer. Also, in order to improve the accuracy of the measurement techniques and the development of technology in the atmospheric environment, CF calculation research should be conducted continuously.
Using data envelopment analysis, this paper annually estimates Malmquist total factor productivity indices and decomposes them into productive efficiency change, technical change, and scale change components for three publicly-owned rail transit properties: the Seoul Subway Corporation(SSC), the Seoul Metropolitan Electrified Railways Sector of Korea National Railroad (SMESRS) and the Busan Urban Transit Authority (BUTA). The paper then conceptualizes that the property produces a single output(car-kilometers) using four inputs(labor, electricity, car and maintenance, and track) and uses unbalanced panel data consisted of annual observations on SSC, SMESRS and BUTA. The results show that the average annual growth rate of productivity of the three properties is 6.6 percent, which is 0.5 percent less than the average annual increasing rate of their labor price. They also show that the greatest part of the growth in productivity is explained by technical change and to a lesser degree by scale change and changes in productive efficiency though each of the three components contributes more than 20 percent to the growth in productivity, These results suggest that the three properties should base the increasing rate of their wages on the growth rate of their productivity and utilize existing technologies more efficiently prior to introducing new ones to raise their productivity, and that all the three components should be considered to evaluate their productivity more correctly.
Using a generalized translog multiproduct cost function model, this paper examines economies of scale and scope in the vertically-integrated Korean railway industry. The paper then conceptualizes that the Korea National Railroad (KNR) produces four outputs (passenger-kilometers, ton-kilometers of freight, average length of passenger trips, and average length of freight haul) using three input factors(labor, fuel and maintenance, and rolling stock and capital). Using time series data collected from the KNR's annual records for the years from 1977 to 2002, the simultaneous equation system consisting of a cost function and two input share equatins is estimated with the Zellner's iterative seemingly unrelated regression. The findings show that the cost function corresponding to a non-Cobb-Douglas, non-homothetic, and non-homogeneous production technology adequately represents the KNR's cost structure. On the other hand, the Korean railway industry experiences sizeable overall scale economies, which result from substantial product-specific scale economies associated with passenger-kilometers and freight ton-kilometers and from scope economies associated with their joint production. In addition, the magnitude of economies of scope is influenced largely by the ratio of passenger trips, and has increased over time as the former has increased while the latter has decreased.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.