• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.268-270
• /
• 2005

전력계통을 계획, 운영, 검토, 해석하는데 있어서 가장 필요한 OPF(Optimal Power Flow)는 현재 다방면에서 새로운 알고리즘과 많은 수리적 방법을 통하여 접근하고 있다. 이들의 기반이 되는 조류계산은 많은 신뢰성들을 얻었지만, 현재 실무자 중심으로 구성되고 직접적으로 적절한 발전배분 상태를 계산하는 부분에서는 일부 한계성이 나타나고 있다. 이에 대해서 계속된 반복계산에 의한 최적의 계통 발전 배분상태에 근접한 값을 제시할 수 있는 프로그램을 PSS/E의 IPLAN을 통하여 개발하였다.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.2
• /
• pp.307-310
• /
• 2016

The operational cost for maintaining the superconductivity of high-temperature superconducting (HTS) cables needs to be reduced for feasible operation. It depends on factors such as AC loss and heat transfer from the outside. Effective operation requires design optimization and suitable operational conditions. Generally, it is known that critical currents increase and AC losses decrease as the operational temperature of liquid nitrogen ($LN_2$) is lowered. However, the cryo-cooler consumes more power to lower the temperature. To determine the effective operational temperature of the HTS cable while considering the critical current and AC loss, critical currents of the HTS cable conductor were measured under various temperature conditions using sub-cooled $LN_2$ by Stirling cryo-cooler. Next, AC losses were measured under the same conditions and their variations were analyzed. We used the results to select suitable operating conditions while considering the cryo-cooler's power consumption. We then recommended the effective operating temperature for the HTS cable system installed in an actual power grid in KEPCO's 154/22.9 kV transformer substation.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.121-125
• /
• 2015

Distribution of rare earth metals (REMs) and rare valuable metals (RVMs) contents in coal ashes (fly ash, bottom ash, and pond ash) and leachate from 11 coal-fired power plants in Korea were investigated. Coal ashes and leachates were found to contain important REMs and RVMs such as Yttrium (Y) and Neodymium (Nd), which was in the range of 23~75 mg/kg. However, it still requires developing effective recovery and separation methods in order to utilize REMs and RVMs in ash and leachate. Recovery of valuable elements (Y and Nd) from various and extensive ash sources (8.21 million tons/year in 2013) can provide the existing power plants with additional profit; therefore, it can significantly improve economics of the power plants.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.1
• /
• pp.9-14
• /
• 2022

Social infrastructure facilities such as production, transportation, gas and electricity facilities may experience poor performance depending on time, load, temperature, etc. and may require maintenance, repair and management as they are used. In particular, in the case of transformers, the process of managing them for the purpose of preventing them from failing is necessary because a failure can cause enormous social damage. The management of transformers should consider both technical and economic aspects and strategic aspects at the same time. Thus, it applies the Asset Management concept, which is widely used in the financial industry as an advanced method of transformer management techniques worldwide. In this paper, the operation and power outage data were secured for the asset management of the transformer for distribution, and the asset status was analyzed. Analysis of asset status using actual operation and power outage data is essential for assessing the statistical life and failure rate of the facility. Through this paper, the status of transformer assets for arbitrary A group distribution was analyzed, and the end of life and replacement life were calculated.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.4
• /
• pp.349-359
• /
• 2019

This paper introduces a wind turbine simulation system based on the IEC 61400-25 standard to simulate different kinds of wind turbines. A unified communication protocol was required for monitoring and control of wind turbines, because manufacturers had used their own protocols for their turbines. As a result of such an effort, the international standard IEC 61400-25 was established. To implement the schema of IEC 61400-25, the IEC61850 SCL was modified and applied to the simulation system, which enabled the system to be compatible with heterogeneous wind turbine information models. The developed simulation system can be used for interoperability tests with a new type of wind turbine information model.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.61-65
• /
• 2015

For effective distribution planning and operation, we need a reliable estimation of operation capacity. But it is difficult to ensure reliability due to the low accuracy of section load data, which is used as a basis in estimating the operation capacity. This paper discusses how to improve the accuracy of section load data by analyzing the existing method of estimating the section load, using statistical techniques to adjust the acquired data, and using the section load estimation algorithm to estimate the section load based on the adjusted data.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.2
• /
• pp.301-307
• /
• 2021

After the spread of the data collection devices such as smart meters, energy data is increasingly collected in a variety of ways, and its importance continues to grow. However, due to technical or practical limitations, errors such as missing or outliers in the data occur during data collection process. Especially in the case of customer-related data, billing problems may occur, so energy companies are conducting various research to process such data. In addition, efforts are being made to create added value from data, which makes it difficult to provide such services unless reliability of data is guaranteed. In order to solve these challenges, this research analyzes prior research related to bad data processing specifically in the energy field, and propose new missing value processing methods to improve the reliability and field utilization of energy data.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.143-149
• /
• 2022

As ESS safety issues increase recently, there is a need to more precisely monitor the temperature of the ESS. In this paper, DTS technology for temperature monitoring of ESS batteries is introduced and the temperature measurement principle is explained. The temperature of the battery module is measured using the DTS system, and the thermal deviation between battery cells inside the battery module is analyzed. In order to analyze how thermal imbalance affects the charging and discharging performance of the battery, an accelerated degradation test was conducted. Cycle life characteristics analysis, battery surface temperature change, and AC impedance characteristics were conducted to analyze how the performance of battery cells differs according to temperature conditions.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.1
• /
• pp.1-4
• /
• 2022

In this study, a tensile test, one of the mechanical tests, was performed with the collected natural aging ACSR. In order to be used as basic data for predicting the replacement cycle of ACSR, the tensile strength with the normal cables was compared for cables which was caused white rust due to exposure of the hard-drawn aluminum wire surface. Among the ACSR wires collected from various regions, white rust was found on the surface of the small wire, and by checking the tensile strength of them, we would like to suggest the criteria for the ACSR replacement cycle, focusing on changes in mechanical properties.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.271-278
• /
• 2020

KEPCO Research Institute developed a GIS-based autopilot drone inspection system for electric power facilities and since its pilot application in 2017, it has been successfully used to detect defects in power transmission lines. This paper presents how to operate this system in the field of power line inspection. Power transmission lines are located in a wide variety of environments such as plains, mountains, river crossings, sea crossings, and industrial areas. Among these, some transmission lines are difficult for human workers to access because of their geographies and some should be checked more often due to their severe contamination. Considering these field conditions, we classified drone operation in two categories to increase its effectiveness and efficiency - patrol surveillance and detailed inspection tasks. This paper describes the detailed procedures of the two tasks above and their field application experiences. In addition, this paper newly proposes how to construct public drone roads by using the information of KEPCO's power transmission lines.