• Journal of the Korea Institute of Building Construction
• /
• v.3 no.2
• /
• pp.103-110
• /
• 2003

In the early 1990's the clean room system was a new trend of the operating room. This is the concept using in seminconductor plants. That is what the space around the operating table so clean as it remove contaminations with circulation of interior air. These articles describe the standard of interior construction and drawing details.

• 연구논문집
• /
• s.22
• /
• pp.85-96
• /
• 1992

A mass flow controller(MFC) is commonly used in the semiconductor industries to control the flow rate of various process gases. The measurement and precise control of the of flow rate the gas are the key for a succesful IC fabrication. To eventually design a reliable MFC, a pre-proto type MFC was built and its flow characteristics were investigated. Most of the functional components of the pre-proto type were built for the present study, but the remainder were adopted from a commercial unit. The flow control characteristics were compared with that of a standard MFC. Major dimensions of an MFC for 0-10 SLM capacity were suggested.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.05a
• /
• pp.204-209
• /
• 1998

OMG에서 제안된 CORBA는 표준 개방 분산환경의 플래트폼을 제공하며 객체지향적인 방법으로 최근 주목을 받고 있다. 일반적으로 CORBA는 원격 데이터베이스 질의 등과 같은 요구/응답형의 응용에 잘 적용이 된다. 그러나 과도한 처리부담, 실시간 처리 기능과 QOS 지원 등의 결여로 멀티미디어 스트림과 같은 연속미디어의 처리에는 부적합하다. 본 논문에서는 실시간 제약을 갖는 멀티미디어 스트림의 효율적인 전송을 위하여 기존의 CORBA를 확장하여 멀티미디어 서비스를 설계한다.

• Proceedings of the KIEE Conference
• /
• 1999.11a
• /
• pp.1-3
• /
• 1999

EM (ElectroMagnetic) pump is used for the purpose of transporting liquid sodium coolant with electrical conductivity in the LMR(Liquid Metal Reactor). (In the present study, pilot EM pump has been designed by using of equivalent circuit method which is commonly employed to analyze linear induction machines for the test of removal of residual heat. The length and diameter of the pump have fixed values of 840 mm and 101.6 mm each by taking account of geometrical size of circulation loop for the installation of EM pump. Flowrate versus developing pressure is related from Laithwaite's standard design formula and the characteristic analyses of developing force and efficiency are carried out according to change of input frequency. From the characteristic curve, input frequency of 13 Hz is determined as the design frequency. On the other hand, The annular air gap size of 6.05 mm is selected not to bring about too much hydraulic loss. Resultantly design analysis makes pump have the electrical input of 604 VA and the hydrodynamical capacity of 1.3 bars and 40 l/min.

• Journal of Communications and Networks
• /
• v.11 no.6
• /
• pp.634-644
• /
• 2009

A diversity of wireless networks, with rapidly evolving wireless technology, are currently in service. Due to their innate physical layer vulnerability, wireless networks require enhanced security components. WLAN, WiBro, and UMTS have defined proper security components that meet standard security requirements. Extensive research has been conducted to enhance the security of individual wireless platforms, and we now have meaningful results at hand. However, with the advent of ubiquitous service, new horizontal platform service models with vertical crosslayer security are expected to be proposed. Research on synchronized security service and interoperability in a heterogeneous environment must be conducted. In heterogeneous environments, to design the balanced security components, quantitative evaluation model of security policy in wireless networks is required. To design appropriate evaluation method of security policies in heterogeneous wireless networks, we formalize the security properties in wireless networks. As the benefit of security protocols is indicated by the quality of protection (QoP), we improve the QoP model and evaluate hybrid security policy in heterogeneous wireless networks by applying to the QoP model. Deriving relative indicators from the positive impact of security points, and using these indicators to quantify a total reward function, this paper will help to assure the appropriate benchmark for combined security components in wireless networks.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.1
• /
• pp.176-181
• /
• 2009

The passenger airbag(PAB) designed for standard sized adults may induce unexpected results to children in out-of-position(OOP) postures. In this work, using MADYMO software, simulations of the OOP injury of children have been performed with respect to PAB design parameters and child dummy positions. The attention is focused on some details with respect to the injury of 3 and 6 year old children in two OOP postures. Among the various design parameters of the passenger airbag systems, four parameters are selected for the sensitivity analysis of the injury with the Taguchi method: bag folding pattern, vent hole size, position of the cover tear seam and the type of door tear seam. An optimal combination of the parameters is suggested.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.20 no.6
• /
• pp.63-70
• /
• 2018

This study is aimed to reflect the current status survey, analysis and response of 10 railway stations using geographical names in one of 19 stations located on Gyeongbu, Honam and Chungbuk line. Most railway stations in the study have shown normal images that are close to the standard type by selecting similar building materials rather than reflecting geographical features. Aside from the shape of the traditional Korean house in Cheongju, almost all newly constructed stations tend to incorporate light gray plating material on their modern exterior to produce Family look design as a railroad station. According to a survey of the sensitivity of the station's name, Osong Station was 73.6 percent, Gyeryong Station 67.3 percent, Heukseok-ri Station was 64.5 percent, Shintan-jin 62.6 percent, and Yeonsan Station 57 percent, more than half. Therefore, the results of the five stations were presented as a calculation and proposed design release focusing on the facades of each station. Each of these stations suggested a way to express the facade design image, considering the railway operation status of Korea Railroad, the area of the station and other surroundings.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1396-1403
• /
• 2009

The Ministry of Construction and Transportation (MOCT) has been constructing a nationwide soil information DB since 2000, as basic data for the construction of 'underground geographical information,' a project under the 2nd National Geo-spatial Information System (NGIS) master plan. The inputted soil information includes not only underground conditions such as the layer depth, type, color, and groundwater level, but also engineering information that can be applied to construction work design, such as on the standard penetration test and the compression test. It is difficult to use this information in soil analysis and design, however, because only the test results are currently available. A web-based geo-spatial information system was developed in this study to facilitate the effective application of the soil information database (DB). First, the space information, layer information, and engineering test information were loaded from the soil information DB in real time, and the earth volume, bearing capacity, and settlement were calculated to develop a web client that will evaluate the ground softness and liquefaction. It seems that the soil information DB can be actively applied to the planning and design of construction works using this system.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.1
• /
• pp.55-68
• /
• 2008

This study is aiming to set a characteristic design and a fashion trend by analyzing hat style trends and fashion images shown in fashion collections in recent seven years. Also, based on the result of the analysis on the five world's major collections, the influence and the interrelation of hat and fashion image were analyzed. The study was performed by the context analysis method and the image evaluation method. In the context analysis method, the 1,391 pictures for hat-styles which were believed to be the standard of fashion style from the S/S season of 1998 to the F/W season of 2004 were analyzed. The research is summarized as follows. Based on the result of the fashion collections, the kinds of hats came Bowler, Beret, Cloche, Capeline, Cap and Hood in order, and Casual, Feminine, Natural, Formal, Romantic, and Mannish came in order for the case of the fashion images for putting on a hat. The result of the analysis on the characteristic of fashion design according to the kinds of hats, the casual image, with highest frequency, was found from all of the kinds except Capeline. Bowler and Cloche were conspicuous in jackets/slacks, Capeline was conspicuous in one-piece shape, and cloth silhouette showed the highest frequency in H type. As for Bowler, the color of cloth and hat was mostly black, and as for Beret and Cloche, achromatic color showed the highest frequency. But as for Capeline, the cloth color, including chromatic color, was various. As for Beret, pattern and material image were various comparatively, but as for other kinds of hats, there were the materials with no pattern and with hard material image.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.3
• /
• pp.49-57
• /
• 2018

Purpose: The increase in patients requiring hemodialysis has resulted in an increase dialysis-associated infections risk. but there are no Renal Dialysis unit design standard meet specified safety and quality standards. Therefore, appropriate Establish standards and legal regulation is important for the provision of initial certification and maintenance of facility, equipment, and human resource quality. Methods: Literature survey on the design guideline and standards of Renal Dialysis unit design in Korea, U.S, Germany, Singapore, Hongkong, Dubai. Results: There are no established standards for facilities in dialysis units in Korea. To prevent infections in dialysis patients, necessary establish standards. Considering the domestic and overseas Health-care facilities standards, the major factors to be considered in the medical environment for Renal Dialysis Unit are as follows. First, planning to separate Clean areas(treatment area) from contaminated areas(medical waste storage area). Second, ensure sufficient space and minimum separation distance. Although there may be differences depending on the circumstances of individual institutions, renal dialysis unit consider the space to prevent droplet transmission. Third, secure infrastructure of infection prevention such as sufficient amount of hand hygiene sinks. Hand washing facilities for staff within the Unit should be readily available. Hand hygiene sinks should be located to prevent water from splashing into the treatment area. Fourth, Heating, ventilation and air conditioning (HVAC) system for Renal Dialysis Unit is all about providing a safer environment for patients and staff. Implications: The results of this paper can be the basic data for the design of the Renal Dialysis Units and relevant regulations.