• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.117-123
• /
• 2014

This paper proposes the constructing method of effective multiplier using basis transformation. Th proposed multiplier is composed of the standard-dual basis transformation circuit module to change one input into dual basis the operation module to generate from bm to bm+k by the m degree irreducible polynomial, and the polynomial multiplicative module to consist of $m^2$ AND and m(m-1) EX-OR gates. Also, the dual-standard basis transformation circuit module to change the output part to be shown as a dual basis into standard basis is composed. The operation modules to need in each operational part are defined.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1458-1464
• /
• 2009

While industrial development as many buildings were builted, amount of energy consume in building also increase rapidly. At this point be tormented the energy depletions are big problem on the rise. The development of renewable energy in trying to resolve the fundamental problem that the technical level is still incomplete. Because of this, reduce energy use in buildings to lot of study. Most of the energy involved in building mechanical system for so many research is continue. Among them, be interested in building mechanical system. Building mechanical system is configured Air conditioning, sanitation, urban (environmental) equipment. In the design of equipment, installation, maintenance, applies to all devices in the field of industrial equipment and general engineering equipment field are within bounds to say that all of the equipment field. However, domestic technology level is still fly short of international standards in architecture, we spand many energy. Because of this, find the current situation and identify the problems look up ways to improve them.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.1
• /
• pp.24-31
• /
• 2013

More than 23% of total nation's energy is consumed by residential building and 57.2% of Korean people are living in apartment. This study was carried out to two kind of process. First, after selecting one standard apartment, our research team investigate realistic energy consumption. Second, using 3-dimension heat transfer tool(TRISCO RADICON) and building energy simulation tool(Visual DOE) As a result, amount of heating and hot-water energy is composed of above 80 percent in standard apartment. And, after applying high performance technologies to standard apartment, namely, after being green home apartment, total energy consumption is reduced by54.6 percent. Also, because of energy consumption characteristics of green home apartment, for making more high performance green home apartment, especially, we have to figure out effective method to reduce electric and hot water energy.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.128-136
• /
• 2010

In according with concrete structural design standard, it is common designing flexure reinforcement concrete to induce tension failure. So reinforcing ratio is limited to inducing tension failure. And maximum reinforcing ratio is regulated to protecting concrete compression strength caused by over reinforced building. Minimum reinforcing ratio is also limited in designing standard to protecting brittle failure as extremely using less reinforcing bar. But in minimum reinforcing ratio it is extremely conservative or it is sometimes impossible to induce stable tension-failure because they are depending on yield failure and experienced method and concrete designing standard strength. Therefore the purpose of the present paper is to evaluate the flexural behavior of minimum steel ratio of reinforced concrete of beams and to propose the guide-line of equation of minimum steel ratio by performing static flexural test of 16 beams according to size effect, number of steel, yielding stress of steel, and concrete compressive strength which are presumed effective variables. From experimental results, the equation of minimum steel ratio was newly proposed considered size effect.

• Convergence Security Journal
• /
• v.7 no.4
• /
• pp.1-8
• /
• 2007

Currently, the needs of open standard and integrated network, and also applications of Ethernet network based system are increasing. By applying and expanding TCP/IP based network technology from high to low control level, factory automation application has been implemented, and thus integrated factory automation system has been accomplished, which is directly interoperable between high level management program and DB system. This paper proposes a communication control device which is based on Ethernet/IP standard system for factory automation. The proposed system is workable in the environment of a network system, which is based on CIP standard interface technology. The proposed system can also contribute to improve data communication characteristics.

• KIEAE Journal
• /
• v.7 no.6
• /
• pp.23-28
• /
• 2007

Limited fossil fuels and unstable energy supply are considered as one of the critical problems in architecture requiring large amounts of energy. In order to this challenge, environment-friendly architecture design is required. Clear data should be prepared to apply solar energy to architecture aggressively and properly. This study used FS statistical analysis data regarding average daily solar radiation of Seoul observed over 20 years to find out standard year and standard daily solar radiation. This study also aims to compare and evaluate an appropriate method of selecting a standard year which is too close to measurement value through comparison and analysis with daily solar radiation acquired by applying overseas researchers' suggesting weight factor. As a result, the data nearest to measurement value of daily solar radiation was UK CIBSE TRY(TYPE 2) displaying 0.100in t-statistic index. For UK CIBSE TRY(TYPE 2), weight factor was applied to three climatic elements except relative humidity. TYPE 1 and TYPE 3 recorded 0.343 and 0.367, respectively, showing higher record of t-statistic than TYPE 2. TYPE 1 was calculated through FS statistical value of single data about daily solar radiation with other climatic elements excluded. For TYPE 3, relative humidity was added to TYPE 2. In particular, since TYPE 2 was closer to the measurement value compared to the others, it is necessary to consider relationship with other climate elements if other climate elements are added.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.2
• /
• pp.127-137
• /
• 2019

In this study, we have developed a calculation system for BIM-based quantities, 4D process, and 5D construction costs, by integrating object shape attributes and the standard classification system which consist of Cost Breakdown System(CBS), Object Breakdown System(OBS) and Work Breakdown System(WBS) in order to use for the 4 dimensional process control of roads and rivers. First, a new BIM library database connected with the BIM library shape objects was built according to the CBS/OBS/WBS standard classification system of the civil engineering field, and a integrated database system of BIM-based quantities, process(4D), and construction costs(5D) for roads and rivers was constructed. Nextly, the process classification system and the cost classification system were automatically disassembled to the BIM objects consisting of the Revit-family style elements. Finally, we added functions for automatically generating four dimensional activities and generating a automatic cost statement according to the combination of WBS and CBS classification system The ultimate goal of this study was to extend the integrated quantities, process(4D), and construction costs(5D) system for new roads and rivers, enabling the integrated use of process(4D) and construction costs(5D) in the design and construction stage, based on the tasks described above.

• Asian Journal of Business Environment
• /
• v.11 no.1
• /
• pp.5-15
• /
• 2021

Purpose: The study aims to delineate Shariah Governance Framework (SGF) by applying the components of New Institutional Theory (NIT) to provide an understanding of how Islamic banks theoretically influence Shariah Governance (SG) practice, structure, and process. Design/methodology/approach: As it is a conceptual paper, this paper has prepared based on an analytical approach to show how such institutions could provide a more effective system concerning the contents, procedures, and practices for the multiple users in the SG process of Islamic banks. Findings: The paper critically explores the adoption of NIT to develop SGF with its existing practice, structure, and procedure. Utilizing NIT, a proposed theoretical framework has developed for exploring the SG through its major components, i.e., 'isomorphism' and 'legitimacy'. It is stated that NIT can offer a useful framework by which homogenous structures, comprising guidelines, standards, and practices become recognized and authorized as a satisfactory standard corporate exercise. Thus, the proposed theoretical framework would be beneficial in understanding and exploring the SGF. Conclusion: The application of this SGF could help to justify the key dimensions of NIT with its overall formation, function, and practices that might also help to attain legitimacy.

• Korean Journal of Oriental Medicine
• /
• v.14 no.2
• /
• pp.87-91
• /
• 2008

Background and Purpose: The purpose of this study was investigate statistical validities of previously reported articles that used various statistical techniques such as t-test and analysis of variance. Methods: To analyze the statistical procedures, 66 original articles using those statistical methods were selected from "Korean Journal of Oriental Medicine(KJOM)" published from 1995 to 2007. Results: Twenty-one articles(32%) did not report correct p-values, 33 articles(50%) used mean${\pm}$standard error(mean${\pm}$SE) and 11 articles(l7%) used mean${\pm}$standard deviation(mean${\pm}$SD). Fifty-two articles(95%) of 55 ones which were tested for normal distribution made an error in describing normal distribution. Seventeen articles misused t-test and 12 articles did not carry out the multiple comparison. Conclusions: The training of researchers with clinical statistics or the participation of statisticians in research design will reduce the significant errors in statistical interpretation of the results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.6
• /
• pp.1862-1871
• /
• 1996

The puopose of this paper is sto modify the current LBB criteria. The validity of current LBB criteria and current standard LBB analysis mehtod are evaluated using linear elastic fracture mechanics and elastic-plastic fracture mechanics. The results of evaluation demonstrate that the current LBB driteria are very conservative and some level of margins already exist in the standard LBB analysis method. Thus, the margin on load .root. and margin on crack size 2 can be eliminated to extend LBB application for the samller diameter pipe.