• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.126-130
• /
• 2008

It takes only few seconds to find an artifact that has anthropomorphic form. There are numerous examples illustrating human's shape in daily life products. Usage of anthropomorphic form has been a basic design strategy especially when industrial designers design intelligent service robots because most of robot features were basically from human. Therefore, it's necessary to use anthropomorphic form not only in appearance design but also in interaction design. To use anthropomorphic form effectively, it needs to measure how much the artifact is similar to human, and then to evaluate whether the usage of anthropomorphic form fits to the artifact. This study's goal was to set up an evaluation standard for anthropomorphism for robot design. We suggest that there are three criteria for the evaluation standard. Those are 'anthropomorphic form in appearance', 'anthropomorphic form in Human-Robot Interaction', and 'accordance in two former criteria'. We expect that when designers put an evaluation step of anthropomophism in their design process of robots, robots might become more preferred by users, and easier to understand how to interact with.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.209-214
• /
• 1999

Strength provisions in Korea Concrete Institute code are more conservative that those in ACI code by increasing load factors and decreasing capacity reduction factors. Cement content of mix design in construction field is usually higher than the modified for standard deviation because of rigorous inspection. Higher cement content increases not only strengths but also heat of hydration, shrinkage and brittleness which are not beneficial. To reduce and optimize the cement content in current mix design of Korean Highway Corporation, properties of fresh and hardened concrete for 16 different mix proportions have been investigated. It is found that the chemical admixture and cement of current mix proportions for highway construction are somewhat higher than the optimum amount. Therefore, the optimum mix design for 16 different purposes has been proposed.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.4
• /
• pp.412-419
• /
• 2015

This paper presents the results of the structural analysis and the optimization of a 6,500 m manned submersible. Nonlinear structural analysis for imperfect spheres with the maximum allowable out-of-roundness(OOR) was performed to calculate the thickness of the pressure hull. Dimensions of viewports were determined according to ASME PVHO standard. The design optimization of the spherical hull with openings was divided into two steps - the optimization of the detailed shape of the viewport reinforcements and the optimization of the viewport location in the spherical pressure hull.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1188-1191
• /
• 1998

Detailed estimation of subsurface resistivity distribution and accurate estimation of actual fault current coming into the grounding system are indispensible to optimun grounding system design. Especially, it is essential for efficient grounding design to estimate subsurface resistivity distribution quantitatively and logically. Accurate estimation of subsurface resistivity distribution has an absolute influence on calculating touch voltage, step voltage and ground potential rise (GPR) which are related with grounding design standard for human safety. In this study, thirty-three electrical sounding surveys were made in Yongdam Power Station to obtain detailed subsurface resistivity distribution and the sounding data were interpreted quantitatively using multi-layered model. The results of the quantitative resistivity models were adopted practically to calculate grounding resistance values. Analytical asymptotic equations and CDEGS program were used in grounding resistance calculation and the results were compared and reviewed in the study.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.569-572
• /
• 2008

The slope failures frequently occurred during heavy rainfalls in Korea of which 70% consists of mountains result in average 60 casualties and hundreds of millions US dollars of property damage. The status of design methods were analyzed with use of existing 102 design reports, Also, the design standards related to cut slopes are suggested by various institutions but the contents of standards are not proper to reflect the complicated geological features of Korea. And most reports rarely followed the suggested standards and are insufficiently conducted.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3353-3360
• /
• 2022

Using data from the design earthquake of the Korean standard nuclear power plant, seismic analyses of a fuel assembly are conducted in this study. The modal characteristics are used to develop an input deck for the seismic analysis. With a time history analysis, the responses of the fuel assembly in the event of an earthquake are obtained. In particular, the displacement, velocity, and acceleration responses at the center location of the fuel assembly are obtained in the time domain, with these outcomes then used for a detailed structural analysis of the fuel rods in the ensuing analyses. The response spectra are also generated to determine the response characteristics in the frequency domain. The structural integrity of the fuel assembly can be ensured through this type of time history analysis considering the input excitations of various earthquakes considered in the design.

• Journal of the Korea Furniture Society
• /
• v.28 no.4
• /
• pp.371-379
• /
• 2017

This study established the scope of the main contents and interpretation of wooden product design using the CNC manufacturing technology as well as the basic concepts of which were defined, accordingly. After coming up with the definition of the CNC wood manufacturing technology from the academic point of view, a design study, using the practical CNC manufacturing technology, was conducted by analyzing and summarizing the contents of each process. In addition, data research and analysis including review on literatures and case studies of existing products were promoted besides design development through application of the design concepts, ergonomics, principle of molding, etc. Ultimately, this study suggested the step-by-step procedure in design drawing, 3D modeling, CAD/CAM data production, CNC manufacturing, and prototype completion together with figures. Through this, the study proposed a standard manufacturing guideline for wood product design using digital manufacturing technology. Base on such efforts, the advantages and points for improvement in product design using CNC manufacturing technology and the future direction of development were forwarded. Meanwhile, a prototype image that was developed through collaborative efforts between the academic circle and field workers was presented to help the case study on the wooden product design technique using CNC.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.7
• /
• pp.373-384
• /
• 2017

The objective of this study was to determine the effect of refrigerant heat exchanger on the performance of type II absorption heat pump performance using numerical analysis. Two heat exchange installation methods were used: solution to refrigerant and waste hot water to refrigerant. These methods were compared to the standard model of hot water flow without using refrigerant heat exchanger. When waste hot waters were bypassed to refrigerant heat exchanger, COP was not affected. However, steam mass generation rates were increased compared to those of the standard model. When solutions were bypassed to the refrigerant heat exchanger, results were different depending on the place where the solution rejoined. COP and steam mass generation rates were lower compared to those when waste heat water was passed to refrigerant heat exchanger. Thus, it is possible to obtain higher steam mass generation rates by using waste water and installing refrigerant heat exchanger.

• International Journal of Contents
• /
• v.11 no.1
• /
• pp.41-51
• /
• 2015

Management systems for electronic library have been developed on the basis of Client/Server or ASP framework in domestic market for a long time. Therefore, both service provider and user suffer from their high cost and effort in management, maintenance, and repairing of software as well as hardware. Recently in addition, mobile devices like smartphone and tablet PC are frequently used as terminal devices to access computers through the Internet or other networks, sophisticatedly customized or personalized interface for n-screen service became more important issue these days. In this paper, we propose a new scheme of integrated management system for electronic library based on SaaS and Web Standard. We design and implement the proposed scheme applying Electronic Cabinet Guidelines for Web Standard and Universal Code System. Hosted application management style and software on demand style service models based on SaaS are basically applied to develop the management system. Moreover, a newly improved concept of duplication check algorithm in a hierarchical evaluation process is presented and a personalized interface based on web standard is applied to implement the system. Algorithms of duplication check for journal, volume/number, and paper are hierarchically presented with their logic flows. Total framework of our development obeys the standard feature of Electronic Cabinet Guidelines offered by Korea government so that we can accomplish standard of application software, quality improvement of total software, and reusability extension. Scope of our development includes core services of library automation system such as acquisition, list-up, loan-and-return, and their related services. We focus on interoperation compatibility between elementary sub-systems throughout complex network and structural features. Reanalyzing and standardizing each part of the system under the concept on the cloud of service, we construct an integrated development environment for generating, test, operation, and maintenance. Finally, performance analyses are performed about resource usability of server, memory amount used, and response time of server etc. As a result of measurements fulfilled over 5 times at different test points and using different data, the average response time is about 62.9 seconds for 100 clients, which takes about 0.629 seconds per client on the average. We can expect this result makes it possible to operate the system in real-time level proof. Resource usability and memory occupation are also good and moderate comparing to the conventional systems. As total verification tests, we present a simple proof to obey Electronic Cabinet Guidelines and a record of TTA authentication test for topics about SaaS maturity, performance, and application program features.

• Korea-Australia Rheology Journal
• /
• v.21 no.4
• /
• pp.289-297
• /
• 2009

We numerically analyzed flow characteristics of the polymer melt in the screw equipment using a proper modeling and investigated design parameters which have influence on the mixing performance as the capability of the screw equipment. We considered the non-Newtonian and non-isothermal flow in a single rotor equipment to investigate the mixing performance with respect to screw dimensions as shape parameter of the single rotor equipment and screw speed as process parameter. We used Bird-Carreau-Yasuda model as a viscous model of the polymer melt and the particle tracking method to investigate the mixing performance in the screw equipment and considered four mixing performance indexes: residence time distribution, deformation rate, total strain and particle standard deviation as a new mixing performance index. We compared these indexes to determine design parameters and object function. On basis of the analysis results, we carried out the optimal design by using the response surface method and design of experiments. In conclusion, the differences of results between the optimal value and numerical analysis are about 5.0%.