• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.770-776
• /
• 2018

This study measured the energy recovery rate of each municipal waste incineration facility according to the revised energy recovery rate estimation method, which targeted four municipal waste incineration facilities (Unit No. 7). The results calculated by the measuring instruments were used for each factor to estimate the recovery rate, and the available potential of available energy was examined by analyzing the energy production and valid consumption. As a result of the low heating value, 2,540 kcal/kg was calculated on average when the LHVw formula was applied, which is approximately 116 kcal/kg higher than the average design standard of 2,424 kcal/kg. The energy recovery rate was calculated as 96.9% on average based on production and 67.5% based on effective consumption, and the analysis shows that approximately 29.4% energy can be used.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.1
• /
• pp.33-39
• /
• 2007

Finite field multipliers are the basic building blocks in many applications such as error-control coding, cryptography and digital signal processing. Hence, the design of efficient dedicated finite field multiplier architectures can lead to dramatic improvement on the overall system performance. In this paper, a new bit serial structure for a multiplier with low latency in Galois field is presented. To speed up multiplication processing, we divide the product polynomial into several parts and then process them in parallel. The proposed multiplier operates standard basis of $GF(2^m)$ and is faster than bit serial ones but with lower area complexity than bit parallel ones. The most significant feature of the proposed architecture is that a trade-off between hardware complexity and delay time can be achieved.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.16 no.6
• /
• pp.135-149
• /
• 2006

Securing wireless Ad hoc network including the secure mechanism design and implementation is generally more difficult for vulnerability of channels and nodes, the absence of infrastructure, topology that change dynamically, and etc, than ire network. The efforts of early researches are based on the adaptation of securing methods for the wire network to wireless ad hoc network. However, wireless ad hoc network could not get effective study finding because network has essential problems. This paper proposes that some new problems are being came to light over the survivability and availability of the network itself, that are caused by the massive packet attack of more than one or two nodes, and proves the consequence of this phenomenon. Also, we propose an effective prevention mechanism of masquerade attacks for survivability reinforcement that escape standard of the early way by survivability of wireless Ad hoc network and approaches for performance elevation and reflect special quality of wireless Ad hoc network.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1609-1617
• /
• 2019

Described in this paper is a design of hardware accelerator for implementing public-key cryptographic protocols (PKCPs) based on Elliptic Curve Cryptography (ECC) and RSA. It supports five elliptic curves (ECs) over GF(p) and three key lengths of RSA that are defined by NIST standard. It was designed to support four point operations over ECs and six modular arithmetic operations, making it suitable for hardware implementation of ECC- and RSA-based PKCPs. In order to achieve small-area implementation, a finite field arithmetic circuit was designed with 32-bit data-path, and it adopted word-based Montgomery multiplication algorithm, the Jacobian coordinate system for EC point operations, and the Fermat's little theorem for modular multiplicative inverse. The hardware operation was verified with FPGA device by implementing EC-DH key exchange protocol and RSA operations. It occupied 20,800 gate equivalents and 28 kbits of RAM at 50 MHz clock frequency with 180-nm CMOS cell library, and 1,503 slices and 2 BRAMs in Virtex-5 FPGA device.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.2
• /
• pp.160-168
• /
• 2022

The new IFF mode, Mode-5 replacing Mode-4, has already been established by the US DoD for its allies and NATO forces. A IFF retrofit program for replacing the Mark XII Mode-4 with Mark XIIA Mode-5 is in progress in order to overcome the security limitations of the former in R.O.K. IFF certification test for the new mode, Mode-5, has been performed on medium range surface to air missile platform of the Korean armed forces for the first time in R.O.K and this is regarded as a monumental event in Korean defense industry. The present paper is a discussion on the procedures applied to the IFF system retrofit and integration, lessons learned from AIMS test with the US AIMS PO as observer. The minimum modification from the existing Mark XII Mode-4 to Mark XIIA Mode-5 and evolutional adaption from previous design including interoperability are required for the system retrofit. Letter of Certification was received from the US AIMS PO after the tests. The authors propose that the lessons learned and know-how acquired during the tests are managed by the R.O.K Government as the standard structure of a database. It is expected that the use of the database will reduce the developmental difficulties and risk, also increase efficiency in future developments and other projects.

• Journal of Korea Trade
• /
• v.24 no.1
• /
• pp.113-130
• /
• 2020

Purpose - This paper examines the legal standards for the interpretation of contract terms in the UNIDROIT Principles of International Commercial Contracts (PICC) and the cases thereunder in order to provide academic implication to promoting an appropriate understanding of this topic in practical business. Design/methodology - This article uses the literature research and case study under the PICC. Findings - the contract terms shall be interpreted according to the common intention of the parties. If such an intention cannot be established, the contract shall be interpreted according to the meaning that reasonable persons of the same kind as the parties would give to it in the same circumstances. The statements and other conduct of a party shall be interpreted according to that party's intention if the other party knew or could not have been unaware of that intention. If not, the reasonable person standard will apply. In applying above articles, all relevant circumstances including the conduct of the parties, practices and usages shall be considered. Terms and expressions shall be interpreted in the light of the whole contract or statement in which they appear and contract terms shall be interpreted so as to give effect to all the terms rather than to deprive some of them of effect. Where contract terms supplied by one party are unclear, contra proferentem rule applies. Where there is discrepancy between several equally authoritative versions of a contract, a preference is given to the interpretation according to the version originally drawn up. Where the parties to a contract have not agreed regarding an important term for their rights and duties, a term which is appropriate in the circumstances shall be supplied. Originality/value - This article examines various cases regarding the topic that were determined under the PICC. By finding legal standards and rulings of relevant cases, this article will help readers in practical business to enhance the ability to apply the provisions to their contracts.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.28 no.4
• /
• pp.61-69
• /
• 2022

Purpose: In response to the rapid spread of COVID-19 in 2020, the government supported facilities and equipment through the 'Urgent Isolation Ward Expansion Project'. Design and remodeling of efficient negative pressure isolation facilities had to be done in a short period of time, and the performance gap between facilities was very large because the types of hospitals and wards of existing medical facilities were diverse. In order to secure the stability of isolation wards between medical facilities and reduce the facility gap, guidelines for planning isolation wards considering the diversity of each hospital should be appropriately presented. In consideration of these points, this study aims to provide basic data for future remodeling guidelines for each plan type of the negative pressure isolation ward first. Methods: We analyzed the plans before and after the change of 13 case hospitals that performed the urgent care bed expansion project for COVID-19 confirmed patients. Before the remodeling, the current status of the facility was analyzed according to the type of corridor, the location of the nursing station, and the location of the elevator. After remodeling, the flow of medical staff and patients, the flow of entry and exit of clean and contaminated items, and the space of negative pressure and non-negative pressure areas. Results: The ward type was divided into three types according to the corridor type and room arrangement: double loaded corridor type with two side wards, race track type with one side ward, and race track type with two side wards. Based on these three types, the standard floor plan type of the isolation ward was proposed in terms of the location of the elevator bank and Nurse station. Implications: When the existing general ward is converted into a negative pressure isolation ward, this study can be a basic data to present customized guidelines for each ward type.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.1047-1059
• /
• 2022

With the development of cloud computing technology, container technology that provides services based on a virtual environment is also developing. Container orchestration technology is a key element for cloud services, and it has become an important core technology for building, deploying, and testing large-scale containers with automation. Originally designed by Google and now managed by the Linux Foundation, Kubernetes is one of the container orchestrations and has become the de facto standard. However, despite the increasing use of Kubernetes in container orchestration, the number of incidents due to security vulnerabilities is also increasing. Therefore, in this paper, we study the vulnerabilities of Kubernetes and propose a security policy that can consider security from the initial development or design stage through threat analysis. In particular, we intend to present a specific security guide by classifying security threats by applying STRIDE threat modeling.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.27 no.4
• /
• pp.51-60
• /
• 2021

Purpose: Tuberculosis(TB) care unit in public health center should be carefully considered to be re-designed as an infection safety environment for both patient and healthcare workers. So, for the enhancement, this study analyses the facility requirements for co-using the screening clinic as a TB and other respiratory disease care unit. Methods: Not only screening clinic facility guidelines from "A Study for Standard Triage Design and Construction Document" but also the guidelines of TB care and related medical facility are reviewed; KDCA, CDC, ECDC and WHO as a TB care, and FGI and NHS for facility. The facility requirements are summarized space, approach, and mechanical requirement in order. By comparing the summary and screening clinic facility guidelines, supplementations are proposed for TB care unit setting. Results: The result of this study shows that both the space program and mechanical requirement of the screening clinic and that of TB care unit are almost identical and could be share, which include direct airflow or negative air pressure in an exam room. To increase functional and economical efficiency, however, it is necessary to consider a multi-functional negative pressured room, So care process may be re-designed based on a room type; face-to-face room or glass wall inbetween. Implications: The facility guidelines for TB care unit of a public health center should be developed to build a safe environment for infection control by reflecting its medical plan and budget.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.9
• /
• pp.647-655
• /
• 2022

The Russian government is expanding strategic cooperation with foreign countries, including production partnerships, in order to secure civil aircraft manufacturing technology and advanced materials, with the aim of becoming the world's third-largest civil aircraft producer. In addition, the Russian government supports the development of the aircraft manufacturing industry and reorganizes the aircraft certification organization to pursue systematic aviation safety and make great efforts in international cooperation and certification activities for the export of aviation products. Establishing a cooperative system for safety and certification of civil aircraft between countries requires a process of mutual understanding and trust in the overall certification system. Therefore in this study, we wanted to analyze Russia's aircraft certification organization, law system, certification procedures to help Russia understand its aircraft certification system.