• Journal of the Korea Society of Computer and Information
• /
• v.10 no.1 s.33
• /
• pp.217-222
• /
• 2005

The on-line and mobile communication technologies provide an environment to make users share information on the rove. However learning on a file received from on-line or mobile internet environment is able to read only, According to this, users cannot use various learning methods to make multimedia contents for learning like coloring and underlining considerable parts. Also, in case of storing, it cannot be stored in a standard file format HTML. Therefore, in this paper, we suggest a new learning platform to be able to change text contents in a web documents and implement a prototype system to process learning system in on-line environment

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.10
• /
• pp.710-718
• /
• 2010

A numerical study was performed to predict refrigerant charge amount in a mini-channel condenser for a R410A residential air-conditioning system. Multi-channel flat tubes with 12 mini-channels of 1.17 mm average hydraulic diameter for each tube were applied to the condenser. The condenser consisted of 3 passes, and the first, second, and third pass had 44, 19, and 11 tubes, respectively. Each pass was connected by a vertical header. In this study, the condenser was divided into 410 finite volumes, and analyzed by an $\varepsilon$-NTU method. With thermophysical properties and void fraction models for each volume element, the R410A amount distribution and a total charge amount in the condenser were calculated. The predicted total charge amount was compared with the experimentally measured charge amount under a standard ARI A condition. The developed model could predict the charge amount in the mini-channel condenser within prediction errors from -23.9% to -3.0%. Air velocity distribution at the condenser face was considered as non-uniform and uniform by the simulation model, and its results showed that the air velocity distribution could significantly influence the charge amount and vapor phase distribution in the condenser.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1309-1314
• /
• 2008

I.G.G is abbreviation for Inert Gas Generator, High temperature in Cargo Tank it desulfurize, exhausted and froze the gas that combined brimstone element and soot, then supply Inert gas by blower, and mack tank inside incombustible range this is equipment that nip in the bud the explosion. The blower for suppling inactivated gas has big impeller with heavy weight to achieve the high pressure, it causes a delay for first operation time and too much load is delivered to motor, total destruction by fire of motor is happening frequently. On this research, we will reduce the size & weight of impeller and install it with several stage, it makes an effect for reducing the first operation time. We also intend to contribute to efficient IGG blower design by research a flowing & pressure specialty from the diameter of impeller, number of blade, and size of casing.

• Korean Journal of Plant Resources
• /
• v.19 no.6
• /
• pp.692-696
• /
• 2006

This study was conducted to evaluate the effect of seed disinfectant, in control of brown leaf blight, growth characteristics, and dry root yield in the cultivation of Alisma plantago after early maturing rice cropping. Experimental plot was laid out in split plots design with three replications. The major seed disinfectants were benomyl Wp, 20%, Captan Wp, 50%, Triferine Ec, 17%, Etridia zole Ec, 25%, and Thioplant-mythyl Wp, 50%. Even though seed disinfectant treated had no effect on the growth and flowering date of Alisma plantago, dry root yield was increased largely with benomyl Wp, 20%, in seed disinfectant than in the other seed disinfectants and contorl. All seed disinfectants had no injury with standard dosage. But all seed disinfectants had slight injury in the double dosage level for the Alisma plantago. On the basis of yield, vegetative and disease paramerer, benomyl Wp (20%) ($100g/20{\ell}$) had shown superior performance, however, all the seed disinfectants are effective as compare to without treatment.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1160-1165
• /
• 2008

The development of a new railway vehicle is under progress through the Next Generation High-Speed Rail Development Project in Korea. Its aim is to develope fundamental technology of the vehicle that can run over 400km/h. The new distributed traction bogie system, 'HEMU'(High-speed Electric Multiple Unit), will be used and is different from previously developed high speed railway vehicles. Previous vehicles adopted push-pull type system, which means one traction-car drives rest of the vehicle. Due to the difference, investigation on dynamic behavior and its safety evaluation are necessary, as a part of verification of the design specification. In this paper, current progresses of researches are presented. And the High-Speed Railway vehicle system is evaluated for a dynamic characteristic simulation. Proper models including air-suspension system, wheel-rail, bogie and car-body will be developed according to the vehicle simulation scenario. International safety standard will be applied for final verification of the system. This research can propose a better solution when test running shows a problem in the parts and elements. Finally, the vehicle that has excellent performance will be developed, promoting academic achievement and technical development.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.15 no.1
• /
• pp.7-16
• /
• 2009

The purpose of this study was to evaluate current packaging modules and design the most acceptable packaging module for domestic and international distribution systems. An optimum packaging module can reduce package costs as well as total distribution costs such as transport, materials handling and warehouse costs. Three different sizes of packaging modules, namely U-type($600{\times}500\;mm$), K -ype($550{\times}366\;mm$) and I-type($600{\times}400\;mm$), were evaluated in terms of the area efficiency and MOEs(measures of effectiveness) for the T-11($1100{\times}1100mm$) and T-12($1,200{\times}1,000\;mm$) pallets. The results showed that the U-type module could fit very well for both pallets and the area efficiency of each module was more than 99 percents. Area efficiency of K-and I-type modules was greatly affected by the pallet footprint dimensions. U-type module also performed better result from MOEs evaluation. Twenty sub-multiple sizes derived from the U-type module were suggested for the future development of the Korean and ISO standards on dimension of transport packages.

• Plant Journal
• /
• v.8 no.2
• /
• pp.52-58
• /
• 2012

Pipe means the connection of the tube in order to transfer fluid from one device to another device. The piping stress analysis is to analyze the structural stability considering the location and the features of piping support after completing the piping design, The allowable stresses comply with the requirements of the relevant standards by examining whether the support of the function and location of pipe or re-operation is confirmed. Allowable stresses are to make sure that the maximum stress should not exceed the allowable stress presented in the ASME B31.1 POWER PIPING code. ASME B31.1 POWER PIPING code ensures a smooth stress analysis can be performed during the initial pipe stress analysis as provided in the case of straight pipe to the horizontal distance between the supports. However, because there is no criteria set in the case of curved pipe, the optimum pipe supporting points were studied in this paper. As mentioned about the curved pipe, loads applied to the support of the position of 17% and 83% of the position relative to the elbow part have results similar to the load acting on the support of straight pipe.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.725-730
• /
• 2007

A framework of multi layered database is proposed for the integrated operation of civil infrastructure information in this study. The multi-layered database is a logically integrated database composed of standardized information layers. The framework of multi-layered database is defined by three axes, national assets, lifetime, and data levels. The axis of national assets indicates civil infrastructures such as bridges, dams, tunnels and power plants that can be considered as national key structures. The axes of lifetime and data levels indicate the standardized information layers generated from the life-phase of civil infrastructure and the priority of data in the information layers, respectively. The standardized information layers are basically composed of reusable data sets defined by information models. A prototype of standard database for steel bridges is constructed based on the framework as a proof of concept. Demonstration examples such as data consistency check and automatic generation of a FEA model show that the proposed concept can assure the sustainable interoperability of civil infrastructure information as well as design information of steel bridges.

• International Journal of High-Rise Buildings
• /
• v.2 no.3
• /
• pp.245-255
• /
• 2013

This paper presents the results of a set of wind tunnel tests carried out to examine wind-induced overall structural loads on rectangular medium-rise buildings. Emphasis was directed towards torsion and its correlation with peak shear forces in transverse and longitudinal directions. Two building models with the same horizontal dimensions but different gabled-roof angles ($0^{\circ}C$ and $45^{\circ}C$) were tested at different full-scale equivalent eave heights (20, 30, 40, 50, and 60 m) in open terrain exposure for all wind directions (every $15^{\circ}C$). Wind-induced pressures were integrated over building surfaces and results were obtained for along-wind force, across-wind force, and torsional moment. Maximum wind force component was given along with the other simultaneously-observed wind force components normalized by the overall peak. The study found that for flat-roofed buildings maximum torsion for winds in transverse direction is associated with 80% of the overall shear force perpendicular to the longer horizontal building dimension; and 45% of the maximum shear occurs perpendicular to the smaller horizontal building dimension. Comparison of the wind tunnel results with current torsion provisions in the American wind standard, the Canadian and European wind codes demonstrate significant discrepancies. Suggested load combination factors were introduced aiming at an adequate evaluation of wind load effects on rectangular medium-rise buildings.

• Macromolecular Research
• /
• v.16 no.8
• /
• pp.734-740
• /
• 2008

A new crosslinked, poly(acrylic acid)-based, dehydrating agent was synthesized through solution polymerization. The Taguchi method, a robust experimental design, was adopted to optimize the synthetic conditions based on the moisture and water absorbing capacities of the dehydrating agent. The method applied for the experiment was a standard L27 ($3^8$) orthogonal array with eight parameters and three levels. By analyzing the variance of the test results, the most effective parameters to control the moisture absorbing capacity (MAC) and its rate were the kind of alkaline base (LiOH, NaOH, or KOH) used as a neutralizing agent of the acrylic acid monomer and the degree of neutralization: The maximum MAC of 40% was achieved at only 2 hat $32^{\circ}C$ and 50% RH when KOH was used as a base and the degree of neutralization was 90%, respectively. However, the water absorbing capacity (WAC) of the resulting dehydrating agent was very low at 158 g/g, indicating that WAC is unaffected by MAC and its rate in this system. The surface morphologies of the agents were examined using scanning electron microscopy (SEM).