• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.175-178
• /
• 2009

H.264/AVC is a video coding standard of ITU-T and ISO/IEC, and widely spreads its application due to its high compression ratio more than twice that of MPEG-2 and high image quality. In this paper, we explained Intra Prediction in H.264/AVC, which is able to achieve higher compressing efficiency from correlation removal of adjacent samples in spatial domain, and proposed efficient Intra Predictor architecture design for H.264/AVC decoder. The proposed system reduced computation cycle using processing element and precomputation processing element and also reduced the number of access to external memory using efficient register. We designed the proposed system with Verilog-HDL and verified with suitable test vector. The proposed Intra Predictor achieved about 60% cycle reduction comparing with existing Intra Predictors.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.12
• /
• pp.35-43
• /
• 2020

Currently, cofferdams of circular cross section are widely applied as temporary facilities for the installation of bridge foundations in river/sea bridge construction in Korea. Existing caisson, sheet pile, and cell type cofferdam are widely used, but these methods take a lot of time and cost for installation and dismantling. In the case of the existing sheet pile construction method, attention is needed to secure internal and external stability because of the damage to the sheet pile due to ground penetration and difficulty in connecting element members. In this study, penetration design of circular steel pipes using suction pressure was performed on the soft ground of the west coast, and it was confirmed that penetration construction using suction pressure was possible through field tests. It was confirmed that applying the ground analysis results using the cone penetration test (CPT) to the design rather than the standard penetration test (N value) results more similar to the field test results. In addition, it was confirmed that local failure of the inside of the cofferdam was induced when a suction pressure higher than the upper limit suction pressure was applied in the silty sand.

• Journal of Distribution Science
• /
• v.20 no.8
• /
• pp.81-91
• /
• 2022

Purpose: The work aimed to integrate and distribute the knowledge of marketing and chemistry for product development, in which individual packaging from water hyacinth was ideal. Research design, data, and methodology: A customer perception was surveyed to guide the preparation process, and eco-packaging preparation followed the perception study. The satisfaction with the packaging using the 4Ps was determined. Results: 159 samples participated in the survey to establish their perceptions. They perceived that eco-packaging was a friendly environment with a score of 4.47. The uses of chemicals and water were less. The design for other functions than a normal function of packaging was preferred. The pulping was done using 3.0 M NaOH. The natural additives of carboxymethyl cellulose (defibering) and corn starch (adhesive) were desired. The paper was characterized according to The National Standard of Kraft paper and was equivalent to the liner board. The prototype of packaging was fabricated as individual packaging. The marketing mix was used to survey 200 samples. The satisfaction with the product was the maximum at 4.53, while the minimum was on price. The online channel was preferred to access the product. Conclusions: Water hyacinth could be added value as eco-packaging that the qualities of pulp were equal to the Kraft paper. Individual packaging from water hyacinth was satisfied.

• The Research Journal of the Costume Culture
• /
• v.30 no.4
• /
• pp.495-512
• /
• 2022

This study aims to design a new sizing system for hygienic masks to protect against COVID-19-related respiratory disorders. The product sizes were collected from 70 commercially available hygienic masks, and 18 head measurements were obtained from the three-dimensional (3D) scan data of 2,048 men and women aged 20 to 69 years from the 6th Size Korea Survey. The statistical analysis was performed using the IBM Statistical Package for the Social Sciences (SPSS) 28.0 program. The "bitragion-subnasale arc" and "menton-sellion length" were chosen as the key body dimensions for the hygienic mask sizing system. The linear regressions with 18 3D head measurements were analyzed, and it was determined that the key body dimensions were useful for statistically predicting other 3D head measurements related to hygienic masks. A new sizing system was proposed for two types of masks, "masks with a tight fit" and "masks with a loose fit," taking into account the existing Korean Industrial Standards (KS) and the shortcomings of the sizes of hygienic masks on the market. The sizing system for tight-fitting masks consisted of the key body dimensions, with their sizes indicated by a pair of numbers. The sizing system for loose-fitting masks consisted solely of the bitragion-subnasale arc, with their sizes denoted by letters such as S, M, and L (denoting small, medium, and large, respectively). Future studies should consider this mask sizing system for different age groups, such as children and adolescents.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.269-276
• /
• 2022

The robustness of a supply chain (i.e., the ability to cope with external and internal disruptions and disturbances) becomes more critical in ensuring the success of a construction project because the supply chain of today's construction project includes more and diverse suppliers. Previous studies indicate that topological features of the supply chain critically affect its robustness, but there is still a great challenge in characterizing and quantifying the impact of network topological features on its robustness. In this context, this study aims to identify network measures that characterize topological features of the supply chain and evaluate their impact on the robustness of the supply chain. Network centrality measures that are commonly used in assessing topological features in social network analysis are identified. Their validity in capturing the impact on the robustness of the supply chain was evaluated through an experiment using randomly generated networks and their simulations. Among those network centrality measures, the PageRank centrality and its standard deviation are found to have the strongest association with the robustness of the network, with a positive correlation coefficient of 0.6 at the node level and 0.74 at the network level. The findings in this study allows for the evaluation of the supply chain network's robustness based only on its topological design, thereby enabling practitioners to better design a robust supply chain and easily identify vulnerable links in their supply chains.

• Journal of Internet of Things and Convergence
• /
• v.9 no.2
• /
• pp.47-54
• /
• 2023

The MyData service makes anyone possible to apply the personal information for the personal credit management or the financial management by proactive managing his/her own information. The MyData means that the anyone is able to control or manage the its own information by changing from the company-oriented or the organization-oriented information to his/her own information. It is mandatory to develop the API G/W which transforms the different user format to the standard format to support the MyData service. This study is to design the API G/W for the MyData service and the designed API G/W supports the 4 major functions - Validation function, Throttling function, Authentication&Authorization function, Mediation function. The designed API G/W make it possible to support the safely and efficient MyData service by serving the various queries with the different formats.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.4
• /
• pp.414-420
• /
• 2022

Objective: In this study, the test-retest reliability and validity were presented to evaluate the usability of isokinetic rehabilitation equipment for the knee joint. Design: Cross-sectional design, reliability & validity study. Methods: Thirty healthy adults participated in the study. A CSMI dynamometer was used as a standardized measuring device to present the validity of the equipment. It was measured based on the dominant leg. The average peak torque value was selected as the measurement variable. After the measurement, a questionnaire was conducted on safety, satisfaction, and performance through the usability evaluation questionnaire. Results: The knee joint isokinetic rehabilitation equipment showed high reliability with Intraclass Correlations Coefficients (ICC) =0.883~0.956. In order to check the validity of the equipment, the 95% confidence interval of the mean difference limit was confirmed by the Bland & Altman plot. As a result, all three angular velocities showed a smaller confidence interval in the flexion than in extension. There were less than 10 plots that were not included in 2 Standard Deviation (SD) between all measurements. As a result of the usability evaluation questionnaire, the average of the safety domain(4.9±0.4), satisfaction domain(4.1±0.8), performance domain(4.3±0.8). Conclusions: If the product is improved by supplementing the items identified in the usability evaluation process, it is judged that it can be used as a useful device in various knee joint rehabilitation fields.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4B
• /
• pp.365-376
• /
• 2009

The importance of resonable treatment of tide characteristics has been shown by Kweon, et al. (2005, 2006) for the crest elevation estimation because of a big difference of tidal elevation along Korean coast. For the procedure of crest elevation design, the expected overtopping probability (EOP) was estimated by Kweon, et al. (2006). The comparisons on each sea showed that EOP was lower east, south and west sea in order. The results involved the assumption that the tide and design level wave height meet any time in a year. However, big waves mainly occur in summer or winter in Korean coast, the study focuses on the encounter probability of big waves and seasonal tide level. A theory of the encounter probability is not derived by the present study but it shows reasonable acceptability of the proposed scenario in which the expected overtopping probability could be an index for the crest elevation estimation in Korean coast. The calculation based on the scenario gives the possibility range for the crest elevation estimation which has no tendency of each sea along Korean peninsular. The range is within the expected overtopping probability of 1% in the whole coast of Korea.

• The Research Journal of the Costume Culture
• /
• v.31 no.3
• /
• pp.296-309
• /
• 2023

This study gathered basic information on the development of Jiu-Jitsu uniforms suitable for players in Korea. Detailed data were collected between December 20^th and December 30^th, 2022 on 21 selected brands sold in online shopping malls. For each, information was recorded on the production country, product type, price, colors, material, and sizing system. A total of 612 datasets were analyzed using frequency analysis, cross-tabulation, and Chi-square tests. Jiu-Jitsu uniforms were classified as either standard or limited edition. Limited edition uniforms were more expensive than regular uniforms. International brands had a higher price range than domestic brands. The most commonly used colors for Jiu-Jitsu uniforms were the regulation colors associated with the sport: white, black, and blue. Domestic brands were more likely to use non-regulation colors than international brands. The material used for the top half of the uniform was predominantly pearl weave, while the bottom half was usually ripstop. International brands used a more diverse range of materials than domestic brands. The Jiu-Jitsu uniform sizing system incorporated a range of sizes between A00 and A6. While sizing designations differed according to the established sizing systems of different countries, the sizes remained the same, as did the range of sizes available. Where size guides were provided, height and weight were used to help the customer determine the appropriate size. The dimensions of each size varied between brands. Overall, we found that international brands offer a more diverse range of Jiu-Jitsu uniform designs than domestic brands.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.333-342
• /
• 2020

Due to the enhancing environmental concerns worldwide with the need of increasing demand for sustainability of building design, maintenance and operation, key stakeholders including the government and developers in many countries strike for the benefits in implementing the green design and building concepts in constructing, infrastructure as well as the buildings. Different countries have their standards or certifications for green buildings while the adoption rate of BEAM-Plus in HK is relatively less compared with other developed countries such as Europe, USA and Japan. Therefore, in the present research, BEAM-Plus, the beginning assessment method of green standard implemented in HK, will be mainly discussed. Current situation of BEAM-Plus implementation in HK will be reviewed and then adopt a systematic approach via literature review and research paper, questionnaire with Analytic Hierarchy Process (AHP) method to depict the opportunities and challenges from the perspective of government and developers regarding implementing BEAM-Plus in HK and thus investigate the implementation gaps. It is found that for both the macro level of opportunity and challenge, the most important criterion is political, in which the weighting value are 0.3114 and 0.2321 respectively. It is obvious that government plays a critical and significant role in affecting the development of BEAM plus. Technological difficulty is also an important factor that challenging and hindering the implementation of BEAM plus, the weighting value is 0.2194 under challenge hierarchy. More experts and professionals should be imported to Hong Kong to enhance the technique is building green buildings. At the end of this paper, solutions and actions will also be suggested and concluded in alleviating the challenges. Finally, solutions and actions are suggested and concluded in alleviating the challenges. Findings from this research can guide developers to consider adopting green elements, government and Green Building Council in HK to review green buildings' policy.