• Spatial Information Research
• /
• v.19 no.1
• /
• pp.13-19
• /
• 2011

As an urbanization is in progress, the change of the planimetric features and topography including high-rise residential buildings commonly occur. The change of the planimetric features and topography causes occurrence of the strong wind and wind speed increase or decrease due to the effect of planimetric features and topography on the windward side even though the wind blows with the same speed. In the design standard, this change by wind speed is defined as the velocity pressure exposure coefficient, the value of coefficient is estimated and reflected by ground surface roughness, but in a reality, ground surface roughness is determined in accordance with the subjective judgement of designer and then the velocity pressure exposure coefficient is estimated, moreover the research and data for classification of ground surface roughness are insufficient. In this paper, we will estimate the velocity pressure exposure coefficient by the quantified method for classifying ground surface roughness by using GIS according to the height of a building targeting area where high-rise residential buildings are built lately. When the structure subjected to wind load is designed, reasonability of design and safety of structure will be more improved by using the estimation method of velocity pressure exposure coefficient presented in this study.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.611-617
• /
• 2008

Nowadays Plate Heat Exchanger (PHE) is widely used in different industries such as chemical, food and pharmaceutical process and refrigeration due to the efficient heat transfer performance, extreme compact design and efficient use of the construction material. In present study, discussed main conception of plate heat exchanger and applied in vacuum. PHE and aimed apply in the fresh water generator which installed in ship to desalinate seawater to fresh water use heat from engines. The experiment is proceeded to investigate the heat transfer between cold and hot fluid stream at different flow rate and supply temperature of hot fluid. Generated fresh water as outcome of the system. PHE is an important part of a condensing or evaporating system. One of common assumptions in basic heat exchanger design theory is that fluid is to be distributed uniformly at the inlet of each fluid side and throughout the core. However, in practice, flow mal-distribution is more common and can significantly reduce the heat exchanger performance. The flow and heat transfer are simulated by the k-$\varepsilon$ standard turbulence model. Moreover, the simulation contacted flow maldistribution in a PHE with 6 channels.

• Journal of Convergence for Information Technology
• /
• v.7 no.5
• /
• pp.95-102
• /
• 2017

Modular toys for creative education require functional blocks to create various types of movements. An active drive module and a lot of passive connection blocks are needed to express motion with combination. In this paper, we propose the design of modular toys to produce various creative movements and controller structure working with them. In order to facilitate the connection between the designed modules, a connection method and a suitable mechanism are suggested. We also dealt with the design of various types of sensor modules that can work in conjunction with modular toys. Using these toys, typical standard application form that can be imitated educationally is suggested and showed the usefulness of the modular toy by actually applying it with designed modules and components. The proposed method is applied to actual educational toys, and the operation is effectively performed by recording operation and playing repetitive operation.

• Journal of Digital Convergence
• /
• v.15 no.7
• /
• pp.223-229
• /
• 2017

Europe, the US and Japan have acquired test results on impact coefficient for a long time and applied it to equipment design to secure safety of structures. However, Korean enterprises use the impact factor held by advanced business to design equipment as it is difficult for them to obtain it through tests. In this paper, NX/NASTRAN, was used to perform static load analysis and impact load analysis of a PCB Handler, semiconductor test equipment, and the result was employed to study how to calculate the impact coefficient with the finite element analysis. The calculation method was applied to the JIS(Japanese Industrial Standard), and the impact coefficient of the PCB handler was calculated as 1.27 for the sudden start or stop. The impact coefficient generated by the analysis is expected to make a great contribution to the industry as it can be used to improve the equipment structure and develop on existing equipment in the future.

• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.441-449
• /
• 2018

The aims of this study were to consist of the eccentric viewing training software based on Korean and to examine the effects on reading speed. The program was used the Korean stimuli by rapid serial visual presentation. Single-subject A-B-A' research design for 2 normally-sighted young adults was used to examine the effect. The reading speed data on short-sentence of participants showed a statistically significant result, as both data from the intervention period and post-training baseline period deviated more than 2 standard deviations from the pre-training baseline period. Through this study, we suggested that eccentric viewing training software based on Korean characters stimulation would allow clinician in Korea to improve reading skills of low vision individuals with central scotomas.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.7 s.361
• /
• pp.45-53
• /
• 2007

In this paper, we propose an efficient hardware architecture for H.264/AVC CAVLC (Context-based Adaptive Variable Length Coding) encoding. Previous CAVLC architectures search all of the coefficients to find statistic characteristics in a block. However, it is unnecessary information that zero coefficients following the last position of a non-zero coefficient when CAVLC encodes residual coefficients. In order to reduce this unnecessary operation, we propose two techniques, which detect the first and last position of non-zero coefficients and arrange non-zero coefficients sequentially. By adopting these two techniques, the required processing time was reduced about 23% compared with previous architecture. It was designed in a hardware description language and total logic gate count is 16.3k using 0.18um standard cell library Simulation results show that our design is capable of real-time processing for $1920{\times}1088\;30fps$ videos at 81MHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.10
• /
• pp.49-54
• /
• 2007

As digital contents based on 3D graphics are increased, the requirement for low power 3D graphic hardware for mobile devices is increased. We design a transformation engine for mobile 3D graphic processor. We propose a simplified transformation engine for mobile 3D graphic processor. The area of the transformation engine is reduced by merging a mapping transformation unit into a projective transformation unit and by replacing a clipping unit with a selection unit. It consists of a viewing transformation unit a projective transformation unit a divide by w nit, and a selection unit. It can process 32 bit floating point format of the IEEE-754 standard or a reduced 24 bit floating point format. It has a pipelined architecture so that a vertex is processed every 4 cycles except for the initial latency. The RTL code is verified using an FPGA.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.5
• /
• pp.95-103
• /
• 2009

The case of rivers facilities works, expense the standard unit cost for the quality and a rough public corporation expense estimating of the rivers public corporation which is fixed form with the information available which it follows basic design phase absently and possibility of fluctuation. It exists many difficulties in rough public corporation expense estimating. The rivers public corporation expense rough estimating method of existing produces does not exist the amount of material of representative section of the rivers dike and the rough public corporation expense estimating method which is systematic with the method which multiples the seniority (M). The research sees the rough public corporation expense predictive model from the planning stage which is not basic design to consider the quality of the rivers facility public corporation. From this study, it can prevent the waste of national budget from the general public corporation and is more accurate and public corporation expense production possibly.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.6
• /
• pp.88-98
• /
• 2009

Construction industries have increasingly utilized Building information Modeling (BIM) technologies. Interoperability - the capability for BIM data to run from one computer application to another in the life cycle of a project has become one of the principal research areas. Enhancing interoperability inevitably requires information structures that are standardized throughout the construction industries. As a candidate of the data exchange standard, Industry Foundation Classes (IFC) has been developed and several researches recently performed to measure its richness of digital data exchange. But doubts have been brought up whether IFC meets a sufficient level of interoperability since the research result revealed a number of cases of information misrepresentation and loss. This research presents the lessons learned from the interoperability tests of three widely used 3D design applications including Graphisoft's Archicad, Autodesk's Revit, and Bentley's Bentley Architecture. One building's architectural and structural design data were modeled with the three tools and exchanged through IFC respectively for interoperability test.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.511-514
• /
• 2005

The application service to use recently an electronic tag have been activated. Therefore research about a data processing of an electronic tag have been processed widely. Therefore, object information to be collected efficiently from various former tag for requesting a data processing of XML based on used widely in Web. For this EPCIS defined the standard interface to share EPC relation data. Currently, Core Event Type of EPCIS defined the Core Type to need in EPC network currently and Types about a business context do not define according to Apply field. We apply to EPC network to a specific business We need the type about the information which defines with Core Event Type. in this paper. We are defining an reusable object type which is used often in a business area. in this way design the schema based to an object information data model of a marine logistics apply to the object type to define in this way and Core Event Type to define EPCIS Specnt.