• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2001.05a
• /
• pp.165-183
• /
• 2001

지난해부터 인터넷 분야에서 가장 확실한 수익 모델을 갖춘 사업 분야로 e-Learning 분야가 손꼽히면서 많은 온라인 교육 서비스가 우후죽순처럼 등장해 이미 1,000여 개의 서비스가 각축을 벌이고 있다. 그러나 e-Learning은 무엇보다도 학습용 컨텐츠의 품질이 그 성패를 좌우한다 할 때 한국의 온라인 학습 컨텐츠의 품질은 부실하기 이를 데 없다는 게 중론이다. 이는 S/W 공학에서 S/W 품질 보장을 위해 개발 방법론이 중요한 것으로 인식되는 것과 이를 지원하기 위한 Method II등 여러 도구들이 보급되고 있는데 비해 학습 컨텐츠는 그 중요도와 개발이 복잡하고 정교함이 요구됨에도 불구하고 개발 방법론에 대한 인식과 개발방법론을 지원하기 위한 도구가 없음에 기인하는바 크다 할 수 있겠다. 아직까지 국내에서는 MacroMedia Director나 ToolBook, Authorware등 일반적인 저작 도구나 웹 기반의 컨텐츠를 제작하는 Dreamweaver등의 HTML Editor만 있으면 컨텐츠가 만들어 질 수 있는 것으로 착각하고 있는 경우가 많다. 교육 학습용 컨텐츠의 개발 주기를 살펴보면 요구 분석->교수 설계->저작->평가->배포의 단계를 거치게 되는데 이때 학습 컨텐츠의 품질은 사실 요구 분석과 교수 설계 단계에서 결정되게 되며 이 학습 컨텐츠의 품질을 결정하는 단계에서는 IT 분야 지식보다는 오히려 교육 공학적 지식이 더욱 요구된다. 그러나 현실적으로 이 단계의 절차적 복잡성과 전문성으로 인해 거의 대부분의 학습 컨텐츠들이 제대로 개발 주기를 거치지 못하고 검증되지 않은 스토리 보드에 의한 저작 단계로 바로 돌입하고 있는 것이 한국의 실정이라 하겠다. 따라서 본 프로젝트에 의해 개발 된 교수 설계 도구는 교육/학습 컨텐츠의 품질 보증을 위한 방법론인 교육 공학의 체제적 교수 설계 이론 Model (Instructional System Design Model), 특히 그 중에서도 이 분야의 사실상의 표준 이론(de facto standard)인 Dick & Carey 교수와 Gagne 교수의 인지주의 ISD Model을 기반으로 정교한 교수 설계와 코스 맵 설계를 가능하게 함으로써 학습 컨텐츠의 품질 보증 활동을 지원 할 수 있는 도구로 개발하였다. 특히 Linux 기반에서 PHP로 개발 함으로써 Platform에 구애받지 않은 사용 환경을 구현 하였으며 향후 많은 e-Learning Platform에 교수 설계 모듈로 장착 함으로써 기존의 e-Learning Platform들의 가치를 높일 수 있는 계기가 될 것으로 생각한다.

• The Journal of the Korea Contents Association
• /
• v.10 no.12
• /
• pp.10-17
• /
• 2010

In this paper, we design digital D-PHY link chip controling DSI (Display Serial Interface) that meets MIPI (Mobile Industry Processor Interface) standard. The D-PHY supports a high-speed (HS) mode for fast data traffic and a low-power (LP) mode for control transactions. For low power consumption, the unit blocks in digital D-PHY are optionally switched using the clock gating technique. The proposed low power digital D-PHY is simulated and compared with conven tional one about power consumption on each transaction mode. As a result, power consumptions of TX, RX, and total in HS mode decrease 74%, 31%, and 50%, respectively. In LP mode, power reduction rates of TX, RX, and total are 79%, 40%, and 51.5%, separately. We implemented the low power MIPI D-PHY digital chip using $0.13-{\mu}m$ CMOS process under 1.2V supply.

• Journal of Aerospace System Engineering
• /
• v.14 no.spc
• /
• pp.49-55
• /
• 2020

The average probability of a lightning strike to transport aircraft operating in airline service has been estimated to be approximately one strike in every year (or one strike per 1,000 through 20,000 flight hours). The important thing is not the probability of a lightning strike to aircraft, but the fact that aircraft is struck by lightning. Therefore, lightning protection design for aircraft should be qualified and compliance with airworthiness standards related to lightning protection must be substantiated in the process of certification. In this paper, I studied means of compliance for lightning protection through analysis of some test cases, including the KC-100 airplane that firstly obtained civil type certificate in Korea. Based on this paper, it will be also necessary to study on the effect of lightning for space launch vehicles.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.90-98
• /
• 2013

The stereo system based on local matching is very popular due to its algorithmic simplicity, however it is limited to apply to various applications because it shows poor quality with low matching rates. In this paper, we propose and design a realtime stereo system based on an adaptive support-weight and the system shows low error rates and realtime performance. Generally, in the adaptive support-weight algorithm the intermediate computing results can not be reused to reduce the number of computations. In this research we modify the scheduling to reuse the intermediate results for the better performance by processing rows and columns separately. The nonlinear functions such as exponential or arc tangent have been designed with piecewise linear and step functions by empirical simulations and error analysis. The proposed architecture is composed of 9 processing elements for realtime performance. The proposed stereo system has been designed and synthesized using Donbu Hitek 0.18um standard cell library and can run up to 350Mhz operation frequency (33 frames per second) with 424K gates.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1588-1596
• /
• 2004

Recently, many WMS(Web Mapping Services) and POI(Point of Interest) service on to be in service on the Internet using Web CIS(Geographic Information System) as information Technology and computer HW are evolved faster in its speed, network bandwidth and features. The Web GIS is, however, limited and constrained on the specification of its system configuration, the service class provided and the presentation methodology of a map. As the mobile Internet becomes popular in mobile service, Web GIS service on mobile environment is strongly required and to be provided by LBS(Location Based Service) on a mobile client such as PDA with location information of the user. In this paper, we made an effort to design and implement a GIS computing environment by thin client for mobile web mapping service. For implementing the thin client GIS computing environment, we were using NGII's(National Geographic Information Institute's) DXF map, representing the map by SVG(Scalable Vector Graphics) recommended by OGC(OpenGis Consortium), and adapting standard XML web service to provide the thin client GIS service on PDA by applying the location information of the user in realtime with GPS on mobile environment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.423-431
• /
• 2011

Warfighting experimentation is an important process for identifying requirements against changing military environment and for verifying proposed measures for reforming military service. The wargame simulation experiment is regarded as one of the most effective means to warfighting experimentation, and its importance is increasing than ever. On the other hand, the results of wargame experiments could be unreliable due to the uncertainty involved in the experimental procedure. To improve the reliability of the experimental results, systematic experimental procedures and analysis methods must be employed, and the design and analysis of experiments technique can be used effectively for this purpose. In this paper, AWAM, a wargame simulator, is used to optimize the organization of operational troops. The simulation model describes a warfighting situation in which the 'survival rate of our force' and the 'survival rate of the enemy force' are considered as responses, 'the numbers of weapons in the squad' as control factors, and 'the uncontrollable variables of the battlefield' as noise factors. In addition, for the purpose of effective experimentation, the product array approach in which the inner and outer orthogonal arrays are crossed is adopted. Then, the signal-to-noise-ratio for each response and the desirabilities for the means and standard deviations of responses are calculated and used to determine a compromise optimal solution. The experimental procedures and analysis methods developed in this paper can provide guidelines for designing and analyzing wargame simulation experiments for similar warfighting situations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.605-612
• /
• 2011

Recently, cyber attacks against public communications networks are getting more complicated and varied. Moreover, in some cases, one country could make systematic attacks at a national level against another country to steal its confidential information and intellectual property. Therefore, the issue of cyber attacks is now regarded as a new major threat to national security. The conventional way of operating individual information security systems such as IDS and IPS may not be sufficient to cope with those attacks committed by highly-motivated attackers with significant resources. In this paper, we discuss the technologies and standard trends about actual cyber threat and response methods, design the collaborative response framework based on the security information sharing in the inter-domain environments. The computation method of network threat level based on the collaborative response framework is proposed. The network threats are be quickly detected and real-time response can be executed using the proposed computation method.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.6
• /
• pp.466-472
• /
• 2016

In this work, a medical linear array ultrasonic transducer working in the range of 20 MHz has been developed for high-resolution ultrasonic imaging. After devising the structure of the transducer suitable for the transmission of high-frequency waves, we optimized the dimension of constituent components. Then, the process to fabricate the transducer was developed to realize the designed structure, and a prototype of the transducer was fabricated and characterized. The center frequency of the fabricated transducer was measured to be 19 MHz, and the fractional bandwidth to be 84.5 %, and the standard deviation of the sensitivity over the entire channels to be 0.74 dB. These measurement results showed good agreement with design data, which confirmed the validity of the high frequency ultrasonic transducer structure developed in this work. It was confirmed that the developed transducer with new structure had wider frequency bandwidth and uniform sensitivity than a conventional 20 MHz transducer.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.6
• /
• pp.117-124
• /
• 2017

In this study, we investigated the optimization of process conditions by using the Six Sigma process, design of experiment (DOE) method and response surface method (RSM) to resolve dimensional deviation and appearance problems arising from the shortened process time of the mobile phone rear cover. The analysis of the trivial many was performed by 2-sample T-test and cooling time, and mold temperature and packing pressure were selected as the vital fews affecting the overall width of the product. The optimal conditions of the process were then studied using the DOE and the RSM. We analyzed the improvement effects by applying the selected optimal conditions to the production process and the results showed that the difference between the mean value and target value of the overall width stood at 0.01 mm, an improvement of 88.89% compared to current process that fell within the range of standard dimension. The short-term process capability stood at $4.77{\sigma}$, which implied an excellent technology level despite a decrease by $0.22{\sigma}$ compared to the current process. The difference in process capability decreased by $2.44{\sigma}$ to $0.41{\sigma}$, showing a significant improvement in management capability. Ultimately, the process time of the product was shortened from 18.3 seconds in the current process to 13.65 seconds, resulting in a 34.07% improvement in production yield.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.2
• /
• pp.27-38
• /
• 2008

In the 21st century, the development of technology overturned the paradigm of the entire society and culture, and the term 'high-tech' became generally accepted around the world by the momentous advances of technology. The purpose of this study is to define the concept of high-tech fashion by clarifying the characteristics of high-tech fashion, and to propose the proper approach toward the coming fashion. Hussein Chalayan shows the experimental and futuristic designs based on the cultural context of architecture and sculpture. Moreover, the scope of this study has been limited into Hussein Chalayan's recent works after the year 2000 up to 2007. High-tech architecture has been, in some ways, a response to pow technology a new aesthetic in contrast with standard modern architecture. High-tech architecture aimed to achieve a new industrial aesthetic, spurred on by the renewed faith in the progression of technology. However, no matter how prominent the industrial look appeared, the functional element of modern architecture has been very much retained. The characteristics of high-tech architecture that had been extracted by analyzing the antecedent studies were: technocism, transformability, and dynamism. Furthermore, the characteristics of high-tech fashion has been explained based on the characteristics of high-tech architecture. First, technocism is expressed either by the new technologized materials, and advanced digital technology. Second, transformability is expressed in the transformable clothing, which performs various functions. Third, dynamism is displayed in dynamic forms influenced by the technology of engineering. High-tech will be the dominant influence in fashion, and the designers will be enamored with the technologies of the new millenium. Architecture and fashion share the characteristics of high-tech, and their common cultural features is confirmed again.