• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.3
• /
• pp.183-189
• /
• 2009

In this paper, we propose RF front-end architecture using hybrid conversion method to receive broadband signal. The validity is verified by design, fabrication and experiment. The proposed RF front-end architecture due to up-conversion block improves the deficiency of performance deterioration to be generated through harmonic signal and image signal conversion in the conventional RF front-end, and improves the deficiency of the complexity that is from to adopt a multiple local oscillators for the generation of wideband LO signal in the conventional RF front-end by applying the principle that tuning bandwidth is multiplied at sub-harmonic mixer. Manufactured circuits satisfy the deduced design specification and target standard with gain above 80 dB, noise figure below 6.0 dB and IIP3 performance above -5.0 dBm for the condition of the minimum gain in RF front-end.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3425-3430
• /
• 2013

The fast-growing market in wireless communications has led to the development of multi-standard mobile terminals. In this paper, a frequency-tunable active RC bandpass filter for multi-standards wireless communication system is designed using an active inductor. The conventional bandpass filter design methods employ the high order filter or high quality factor Q to improve the stopband attenuation characteristics and frequency selectivity of the passband. The proposed bandpass filter based on the high Q active inductor has an improved frequency characteristics. The center frequency and gain of the designed bandpass filter is tuned by employing the tuning circuit. We have performed the simulation using TSMC $0.18{\mu}m$ process parameter to analyze the characteristics of the designed active RC bandpass filter. The bandpass filter with Q=20.5 has 90MHz half power bandwidth at the center frequency of 1.86GHz. Moreover, the center frequency of the proposed bandpass filter can be tuned between 1.86~2.38GHz for the multi-standards wireless communication system using the capacitor of the tuning circuit.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.18 no.4
• /
• pp.53-65
• /
• 2012

Purpose: With the increasing national interest in health, the number of health examination centers is growing rapidly, and it is growing as independent medical institutes separated from hospitals. With the growing functions and size of health examination institutes, considerations for testees, who are the most important users of the health examination centers, have taken the back seat. In particular, for health examination programs that take on a sequential traffic line, it is important to be aware of the space of each examination room, but the lack of a scientific evaluation method for this has resulted in great discomforts for testees using the health examination center. Method: Thus, this study proposes risk evaluation indices (RCF TCF, RC3, RR, ARR), and set a standard health examination program based on the national health examination program. This was applied to 11 different sized health examination centers to find their features, and together with identifying the trends of the indices, the following results were deduced. Result: 1) ARR showed a wide-range feature as the number of unit spaces increased, while RR were discovered regardless of the size, thus displaying local features. 2) The increase of ARR is affected more by internal factors in the health examination center than from outside factors. 3) By gender, when separating the basic health examination fields, the connective relation of the comprehensive health examination fields had a big effect on ARR. 4) By becoming larger, the fields of function become independent and the waiting space that results from it increases the number of total movement, so there is space for improvement in this.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.3
• /
• pp.109-118
• /
• 2013

Fashion icons of 21st century are not only the fashion leaders that show fashion trend but also the typical fashion signs or symbols that show visually changes in sensibility trends. The purpose of this study was to analyze the framework of 21st century fashion by the public to recognize through these changes. In this study, the background of the occurrence of various 21st century fashion icons and their characteristics were investigated and the changes of revealed features and symbolic meanings were examined compared with them of 20th century. The 24 celebrities which have been called as the bests of fashion icons since year 2000 were selected by searching the most popular search engines such as daum, yahoo and google, and 13 of them were picked as the highest in preference and awareness by surveying 50 students majoring in fashion. And then their fashion styles, backgrounds, and influence on the public fashion were studied. As a result, the 21st century fashion icons reflecting the cultural characteristics such as convergence and exaggeration and the sensitivities of fusion, collaboration, hybrid sensibility in art were powerful enough to create innovative styles destroying the era and the standard. Their styles have constantly created new looks. The exposed new individual sensitivities on media-fusion of two or more sensibility and coordination techniques without being tied to the existing anchorage system-were as influential as high fashion and leaded the imitation and reproduction by dazzling the public. As the media become more powerful, the influence of fashion icons interacted more closely with the public and has been evolved through the sensitivity of the reversal, cultural, economic, visual, or temporal fusions. To sum up, it is shown that the outstanding fashion styles suggested by the leading fashion designers have approach to the public more closely by the fashion icons.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.46-52
• /
• 2014

In this paper, we present a design of meander type microstrip patch antenna which has the best quality in RFID approved international standard of 910MHz broadband, usable in metal environment. In order to be fit into the commercial tag chip on the antenna, a square shaped feeder is installed on the main body as well as in the main body. In addition, a multi meander type patching element was designed in order to reduce the main body effectively. Three antennae, Cases 1, 2 and 3, were designed and compared in the areas of broad band width, effectiveness or recognition distance according to their sizes and number of folds. The measurement result of Case 3 was determined to be the best. It was confirmed that mostly the efficiency and characteristic gain change due to antenna size and number of folds in meander type influenced the antenna recognition distance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2465-2473
• /
• 2011

This paper describes a circuit-level optimization of DFU(decoding function unit) for LDPC decoder which is used in wireless communication systems including WiMAX and WLAN. A new design of DFU based on sign-magnitude arithmetic instead of two's complement arithmetic is proposed, resulting in 18% reduction of gate count for 96 DFUs array used in mobile WiMAX LDPC decoder. A multi-mode LDPC decoder for mobile WiMAX standard is designed using the proposed DFU. The LDPC decoder synthesized using a 0.18-${\mu}m$ CMOS cell library with 50 MHz clock has 268,870 gates and 71,424 bits RAM, and it is verified by FPGA implementation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.488-494
• /
• 2014

Although friction pendulum system has various advantages it is difficult to estimate the behavior because of velocity, bearing pressure, and temperature dependent characteristics of coefficient of friction. This research focuses on evaluating the conservatism of each method used and the effects of bearing pressure on the behavior of the system by conducting comprehensive examination on design and analytic procedure of friction pendulum system, as is proposed in standard, code and literature. In addition, this study provides comparative analysis on general behavior characteristics of friction pendulum system by comparing the result with that of the analysis on lead rubber bearing which possesses the same dynamic properties.

• Korean Institute of Interior Design Journal
• /
• v.27 no.2
• /
• pp.24-36
• /
• 2018

Implementing a home modification to enable elderly's safe and independent living is the key plan to realize their aging in place. South Korea in which had entered an aged society is not yet vitalized in home modification for the elderly compared to that of welfare-developed countries, and South Korea provides support that is limited to the low-income elderly. Therefore, this purpose of this study was to analyze the laws related to the home modification, the present condition of home modification support, the standards and guidelines in home modification, the support in house modification cost, and supporting organization and working force in the home modification. Through the analyzing process, this study examined the current situation and problems of institutional support in the home modification for elderly and the proposed plan for institutional improvement. The suggestions based on the results are as in the following. 1) Home modification support law(act or regulation) is required to be improved 2) Home modification support system correspondent to aging process should be provided regardless of their income levels. 3) Delicate plan standard and guideline are necessary for a process of implementing the home modification for the elderly. 4) Information on life behavior is in need for the implementation of elderly-customized home modification. 5) Cost for the home modification should be considered to cover by the Act on Long-Term Care Insurance for the Aged. 6) Housing Welfare Center and Housing Welfare Professional should be actively utilized for the home modification support institution and work force.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.2
• /
• pp.177-190
• /
• 2016

On-line consumer reviews are good references for consumers to evaluate and buy apparel products. The objective of this study is to facilitate communication about performance textiles between consumers and merchandisers who buy and sell apparel products on online. The survey was based on standardizing words used in consumer reviews written after purchase of summer knit t-shirts at internet shopping mall and evaluating the performance textiles including cellulose fibers. We collected reviews of five sorts of the clothing products including cotton/modal, tencel/polyurethane, polyester/rayon, linen, cotton and selected 1000 reviews related to textiles. For classifying each word used in the reviews by the performance textiles, they were quantified applying same standards. The results were as follow: First, the standard for consumer to consider importantly was tactile sensation, appearance, pilling, thickness, dimensional stability in washing. Second, the important category of performance textiles was healthy-comfort and psychological-comfort. Third, there were difference performance textiles for consumer to recognize, e.g. cotton/modal was important to air-permeability, tencel/polyurethane was noticed about tactile sensation, polyester/rayon was perceived about pilling unlike other things, linen had a problem of clothing care-convenience, then cotton was familiar fiber to important for appearance. The last, consumers usually focused on writing the most positive or negative online reviews. Although not familiar with professional terminologies, consumers are sensitive to physical properties of textiles. Therefore, standardizing and evaluating performance textiles are expected to improve satisfaction as providing objective information to consumers considering in buying apparel products at online shopping mall and increase in revenue to manufacturer.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.4
• /
• pp.433-445
• /
• 2015

Objectives: The major objectives of this study are to review the issues surrounding trade secret claims in the Chemicals Control Act and Amendment on Occupational Safety and Health Act(1917-227) and to propose a way of improving the reliability of chemical information in MSDSs, labels and National Chemical Survey results. Materials: To review the issues on trade secret claims, we made an analysis frame which was divided into three steps: Value and Problem Recognition; New Regulation Design; and Enforcement and Amendment. We then compared Korean issues with issues from the United States' Hazard Communication Standard and Emergency Planning & Community Right-to-Know Act, Canada's Workplace Hazardous Materials Information System and Hazardous Materials Information Review Act and the European Union's Regulation on Classification, Labelling and Packaging of substances and Mixtures. Results: The stage of right-to-know development in Korea has passed the Value and Problem Recognition phase, so efforts are needed to elaborately design new regulation. Conclusions: We recommend two ways to improve right-to-know in Korea. First, strict examination of the quality of documents for trade secret claims is very important. Second, trade secrets should be limited to less-hazardous substances.