• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.104-113
• /
• 2013

New USNCAP has been carried out by NHTSA including front and side crash from MY2011. In this paper, test results for USNCAP Side crash were reviewed by statistical analysis. This review focused on side crash test results to investigate the effect of changes from new USNCAP side crash test protocol among 30 passenger cars. These results were summarized as followings. Total number of 5 star vehicles on the front seat dummy (16 vehicles, 53.3%) was slightly smaller than the rear seat's (17 vehicles, 56.7%) in MDB test. For the ES-2re dummy, chest injury, ie maximum rib deflection contributed to 66% in the mean value of $P_{joint}$. Pelvis injury was highly dependent upon performance up to 87% in the SID-IIs dummy cited on the rear seat in average $P_{joint}$. For Pole test, pelvis injury made contribution to the average performance to 83%. For standard deviation, it showed the largest value in the same body region as the mean value for each dummy. Overall front seat performance showed 14 vehicles, 44.6% with 5 star vehicles less than each MDB or Pole test result. This result showed that performances in MDB test were different pattern to Pole test on driver position. Number of 5star vehicles for overall side NCAP performance are 18 passenger cars (60%). Curtain airbag and driver thorax airbag were equipped in all test vehicles. One vehicle is equipped with thorax airbag in the rear seat. Results from two side tests considered as reliability problem, ie the cause for large standard deviation in side crash test. Consequently, the countermeasure for new USNCAP side crash test is essential to design the effective side structures for side collision and to control well dummy kinematics with curtain and thorax airbag in order to reduce chest and pelvis injuries.

• Journal of the Korean Society of Safety
• /
• v.35 no.5
• /
• pp.1-8
• /
• 2020

Mobile elevating work platforms (MEWPs) consist of a work platform, extending structure, and chassis, and are used to move persons to working positions. MEWPs are useful but are composed of pieces of equipment, and accidents do occur owing to equipment defects. Among these defects, accidents caused by the fracture of bolts fixed to the extension structure and swing system are increasing. This paper presents a failure analysis of the fixing bolts of MEWP. Standard procedure for failure analysis was employed in this investigation. Visual inspection, chemical analysis, tensile strength measurement, microstructural characterization, fractography analysis by Optical Microscope(OM) and Scanning Electron Microscopy(SEM), and finite element analysis (FEA) were used to analyze the failure of the fixing bolts. Using this failure analysis approach, we found the root cause of failure and proposed a means for solving this type of failure in the future. First, the chemical composition of the fixing bolt is obtained by a spectroscopy chemical analysis method, which determined that the chemical composition matched the required standard. The tensile test showed that the tensile and yield strengths were within the required capacity. The stress analysis was carried out at five different boom angles, and it was determined that the fixing bolt of MEWP can withstand the loads at all the boom angles. The outcomes of the fatigue analysis revealed that the fixing bolt fails before reaching the design requirements. The results of the fatigue analysis showed primarily that the failure of the fixing bolt was due to fatigue. A visual inspection of the fractured section of the fixing bolt also confirmed the fatigue failure. We propose a method to prevent failure of the fixing bolt of the MEWP from four different standpoints: the manufacturer, safety certification authority, safety inspection agency, and owner.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.212-216
• /
• 2004

XML(extensible Markup Language) of W3C(World Wide Web Consortium) that is used the standard core technology of data exchange on the current Internet is an independent data type of usable at the all platforms. Especially, it can handle rapidly because of the integration of each other data types that is exchanged. Between each application and system that built at an enterprise in the past. However, W3C had notice to use XSLT(extensible Stylesheet Language Transformation) that is document transformable standard to descript expression information in XML documents because documents of XML only have a logical structure information. It is designed for XML that is developed for data exchange on the internet. Moreover, it is proposed to process and to change as other data type for expression XML documents for user. Tris thesis design and implement XSLT document editing system transformable as a HTML data type applying XSLT at XML and developed the system. It can edit XSLT document that descript expression information in XML document that is used for data editing in the WYSIWYG environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.1055-1059
• /
• 2006

With the recent drastic development of Internet technology, electronic prescription and prescription EDI system is used for the hospital and doctor's office and the medical business area is rapidly developed and considered as the one making a very great profit. The system to reduce inconvenience caused by the result of separation of medicine activity from drug one such as receiving prescription from hospital, providing it and waiting long at drug store is studied and the service quality for patient is improved by processing prescription per patient into database. In this thesis, the first achievement is that the standard format of prescription is designed, the second one is that the standard format of prescription is developed based on XML for user to issue prescription without setting up the separate environment and considering type of operating system and the last one is the database search result based on XML is implemented to help user to manage interface and maintenance easily.

• The KIPS Transactions:PartA
• /
• v.10A no.3
• /
• pp.269-278
• /
• 2003

The popularity of the web based education has come the need for variety learning methods and for business to exploit the web not only for interoperability but also standardization. This way of standardization has come to researched for environments, contents and practical uses in ISO. The IEEE has special]y established five technical classes for LTSA which provide advanced e-learning environments. Feedback functions would not be supported and specified in standardization for Query Answer on LTSA. In this paper, we describe the query and answer model which we have developed on layer three of LTSA. We develop the redefined model for transforming data flow oriented into object or component based model. We have developed the Query Answer Metadata (QAM) based on Learning Object Metadata (LOM). We design and showed thing a prototyping implementation the Query Answer Learning Tool (QALT). We have used the QALT to address the problem of efficiency of web based education. We also used it to develop the related tools with quality and productivity.

• Nuclear Engineering and Technology
• /
• v.48 no.6
• /
• pp.1360-1367
• /
• 2016

This paper introduces a boron meter with improved accuracy compared with other commercially available boron meters. Its design includes a new fitting function and a multi-detector. In pressurized water reactors (PWRs) in Korea, many boron meters have been used to continuously monitor boron concentration in reactor coolant. However, it is difficult to use the boron meters in practice because the measurement uncertainty is high. For this reason, there has been a strong demand for improvement in their accuracy. In this work, a boron meter evaluation model was developed, and two approaches were considered to improve the boron meter accuracy: the first approach uses a new fitting function and the second approach uses a multi-detector. With the new fitting function, the boron concentration error was decreased from 3.30 ppm to 0.73 ppm. With the multi-detector, the count signals were contaminated with noise such as field measurement data, and analyses were repeated 1,000 times to obtain average and standard deviations of the boron concentration errors. Finally, using the new fitting formulation and multi-detector together, the average error was decreased from 5.95 ppm to 1.83 ppm and its standard deviation was decreased from 0.64 ppm to 0.26 ppm. This result represents a great improvement of the boron meter accuracy.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.2
• /
• pp.33-40
• /
• 2016

Due to the growth of social network systems (SNS), big data are realized and Hadoop was developed as a distributed platform for analyzing big data. Enterprises analyze data containing users' sensitive information by using Hadoop and utilize them for marketing. Therefore, researches on data encryption have been done to protect the leakage of sensitive data stored in Hadoop. However, the existing researches support only the AES encryption algorithm, the international standard of data encryption. Meanwhile, Korean government choose ARIA algorithm as a standard data encryption one. In this paper, we propose a HDFS data encryption scheme using ARIA algorithms on Hadoop. First, the proposed scheme provide a HDFS block splitting component which performs ARIA encryption and decryption under the distributed computing environment of Hadoop. Second, the proposed scheme also provide a variable-length data processing component which performs encryption and decryption by adding dummy data, in case when the last block of data does not contains 128 bit data. Finally, we show from performance analysis that our proposed scheme can be effectively used for both text string processing applications and science data analysis applications.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.175-179
• /
• 2009

this paper proposes a filter design that makes to be satisfied EMC spec. in reliability test of analogue switch for electronic equipment and air conditioning load unit. A designed electromagnetic wave filter was applied to minimize an mutual interference and surrounding environment and improve the product's quality being satisfied to EMC standard. By simulation, using a spectrum analyzer at the 30MHz~1GHz band, ISO/JASO standard frequency range, and simplified EMI chamber, energy distribution of a specific frequency band was analyzed and the capacity of the element which composed the filter was determined in order to implement the most suitable electromagnetic wave filter.In fact, it was certificated that noise decrease by filter addition to the analogue switch for electronic equipment and air conditioning load unit in Certification Authority, and confirmed that the unit is carried out a normal action without electromagnetic wave interference.

• Clean Technology
• /
• v.15 no.1
• /
• pp.23-30
• /
• 2009

European directive DIRECTIVE 2002/96/EC requires the minimum recycling & recovery rate on the waste electrical and electronic equipments (WEEE). But, they do not have guidelines on the calculation methods for recycling and recovery rate. A standard method to calculate recyclability and recoverability rate of products in the designing stage is necessary for the manufacturers so that they can reflect the calculated result to the improvement of product design. In this work, we investigated the existing calculation methods for the recycling and recovery rates of WEEE and the recyclability and recoverability rates of electrical and electronic equipments (EEE). A method for the calculation of recyclability and recoverability rates for the EEE products in the development stage was developed. The newly-developed calculation method was applied to some EEE products and the calculated results were evaluated.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.10
• /
• pp.105-111
• /
• 2008

To improve the stability of levee structure, it is required to use good quality fill materials, intensive management, appropriate hydraulic structure and construction of cut-off wall. In particular, the most important factor of levee construction technology is to use bed sediment for its safety. In this study, seepage model test and numerical analysis were performed based on a standard section of levee recommended in the river design standard of korea (2005). The results of test and analysis show that most of the bed soil is a sand (SP in USCS), which does not satisfy the permeability criteria for levee materials ($< k=10^{-3}cm/sec$), thus for the safety of levee it is required to adopt a stabilizing method such as good quality soil mixing, water content control.