• Journal of Energy Engineering
• /
• v.19 no.4
• /
• pp.251-257
• /
• 2010

Korea have a plan to enforce the Renewable Portfolio Standard(RPS) in 2012 for climate change action and effective use of energy but because of lack of renewable energy resources and limits of technology development, it will be hard to fullfill a target for RPS obligation in domestic power generation sector and woodchip biomass cofiring with coal combustion is the one of the alternative methods of the goal. Woodchip biomass cofiring with coal combustion is easy to approach technical design and has competitiveness of $CO_2$ & renewble energy certificate benefit and also has much lower generation cost than any other renewable energy resources. Because of that reason, woodchip biomass cofiring with coal combustion should be needed to fullfill the goal for RPS obligation in domestic power generation sector with midlong-term direction.

• Journal of Korean Society of Rural Planning
• /
• v.6 no.1 s.11
• /
• pp.29-37
• /
• 2000

The purpose of this study was to propose section designs for the ecological improvement of streams in rural villages in Korea. According to the survey about ecological conditions of rural streams of 10 selected rural villages (sep., 1996), the streams could be classified into three divisions(upstream, inner village, downstream), and the average width of streams was 9m, and the height of banks 3.1m. The slopes of basin were 7.33%, 2.67%, 1.39% at upstream, inner village, downstream respectively. The survey about the residents' usage of stream and the preferred activities(jun., 1997) showed that the streams were most frequently used for the supply of agricultural water use(39%), for the washing(15%) and for the recreation and rippling(10%), etc.. Three standard designs were presented for upstream, inner village, and downstream, and three standard sections were made by each designs. For the upstream division, it was designed to be used for the recreational activities in summer and the major stream bank materials were base rock and existing boulders with least artificiality. As the streams in the residential area were expected to be frequent access and used by the residents, most facilities for the streamside activity such as waterfront, water holes, shallows, walk were concentrated in this part with some artificiality. The downstream was designed for the agricultural activities such as water supply, space for the preparation of work and some break during the work.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.1
• /
• pp.85-92
• /
• 2013

Many efforts will have to be made on securing the stable supply of the energy due to the worldwide trend of controlling the utilization fossil fuels inducing global climate change. Renewable portfolio standard enforced to power companies over 500 MW capacity from 2012. Tidal current energy is one of the most interesting renewable and clean energy resources that have been less exploited. Especially, Korea has worldwide outstanding tidal current energy resources and it is highly required to develop a tidal current energy conversion system(TECS) in coastal region. So, we examine a tidal in-stream energy using a numerical model and estimate a tidal current potential for commercialization of tidal current power plant in the sea of the Bunamgun-do. Available tidal energy resources is also analytically estimated using a tidal farm method and the annual energy production of an optimal TECS arrays will be calculated with taking into account interference of lateral and longitudinal spacing.

• Journal of Adhesion and Interface
• /
• v.5 no.2
• /
• pp.14-26
• /
• 2004

For reliable determination of mechanical characteristics of adhesively bonded joints used e.g. as input data for computer-aided design of complex components, the thick-adherend tensile-shear test according to ISO 11003-2 is the most important material testing method. Although the total displacement of the joint is measured across the polymer layer directly in the overlap zone in order to minimize the influence of the stepped adherends, the substrate deformation must be taken into account within the framework of the evaluation of the shear modulus and the maximum shear strain, at least when high-strength adhesives are applied. In the standard ISO 11003-2 version of 1993, it was prescribed to perform the substrate deformation correction by means of testing a one-piece reference specimen. The authors, however, pointed to the excessive demands on the measuring accuracy of the extensometers connected with this technique in industrial practice and alternatively proposed a numerical deformation analysis of a dummy specimen. This idea of a mathematical correction was included in the revised ISO 11003-2 version of 2001 but in the simplified form of an analytical method based on Hooke's law of elasticity for small strains. In the present work, it is shown that both calculation techniques yield considerably discordant results. As experimental assessment would require high-precision distance determination (e.g. laser extensometer), finite element analyses of the deformation behavior of the bonded joint are performed in order to estimate the accuracy of the obtained substrate deformation corrections. These simulations reveal that the numerical correction technique based on the finite element deformation modeling of the reference specimen leads to considerably more realistic results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.257-260
• /
• 2002

This paper describes a design of cryptographic processor that implements the AES (Advanced Encryption Standard) block cipher algorithm“Rijndael”. To achieve high throughput rate, a sub-pipeline stage is inserted into the round transformation block, resulting that the second half of current round function and the first half of next round function are being simultaneously operated. For area-efficient and low-power implementation the round transformation block is designed to share the hardware resources in encryption and decryption. An efficient scheme for on-the-fly key scheduling, which supports the three master-key lengths of 128-b/192-b/256-b, is devised to generate round keys in the first sub-pipeline stage of each round processing. The cryptoprocessor designed in Verilog-HDL was verified using Xilinx FPGA board and test system. The core synthesized using 0.35-${\mu}{\textrm}{m}$ CMOS cell library consists of about 25,000 gates. Simulation results show that it has a throughput of about 520-Mbits/sec with 220-MHz clock frequency at 2.5-V supply.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.477-480
• /
• 2002

Transparency of position that provide quick service regardless of physical position to users in distribution computing environment is getting into prominence and is developed in component form that many application softwares take advantage of distributed object technology. Because design object in distribution computing environment and OMG introduces OMA for embody, defined CORBA by standard of distributed object technology on OMA's abstract picture object model. Security service in CORBA platform is very important. Present object security service in distribution computing environment that refer standard of sorority and security models of distribution computing platform in CORBA in this treatise and follow in CORBA security service rules.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.11
• /
• pp.33-43
• /
• 2002

This paper describes a design of cryptographic processor that implements the AES (Advanced Encryption Standard) block cipher algorithm "Rijndael". To achieve high throughput rate, a sub-pipeline stage is inserted into a round transformation block, resulting that two consecutive round functions are simultaneously operated. For area-efficient and low-power implementation, the round transformation block is designed to share the hardware resources for encryption and decryption. An efficient on-the-fly key scheduler is devised to supports the three master-key lengths of 128-b/192-b/256-b, and it generates round keys in the first sub-pipeline stage of each round processing. The Verilog-HDL model of the cryptoprocessor was verified using Xilinx FPGA board and test system. The core synthesized using 0.35-${\mu}m$ CMOS cell library consists of about 25,000 gates. Simulation results show that it has a throughput of about 520-Mbits/sec with 220-MHz clock frequency at 2.5-V supply.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.10 no.2
• /
• pp.19-23
• /
• 2014

In the capital of Mongolia where the air quality is getting worse due to the coal consumption used for electricity generation and district heating, the application of geothermal systems in the housing sector is recently designed for high class resort. In this study, the case of applying a geothermal system in a house in Mongolia is examined. The effects of passive house design on the needed heat pump capacity, as well as the annual energy consumption are analyzed. Moreover, as the initial costs, except labor fee, are assumed similar to Korea, cost analysis for several cases is examined, too. From the results, if a house is designed according to passive house standard instead of ASHRAE standard, the heat pump capacity can be expected to be reduced from 16 to 5~6 RT. Furthermore, although the initial cost of architectural cost might increased by 29 M\, the total initial cost is reduced by 14 M\, while the annual energy consumption is reduced by 14%. This is mainly driven by the fact that the geothermal system which serves as the main system to cover the building needs, with a high initial cost for fulfilling the peak requirements.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.955-958
• /
• 2005

Recently, agricultural product of inferior qualify and cheap is imported form china, so domestic farmhouses go through difficulty. Moreover, consumption decreasing because of a new about carcinogen detect of chinese agricultural product. Information through certification system construction of domestic agricultural product is offered to customers for distinguish from chinese, and certain inspection standard for importation restriction should be ready to solve this problem. In this paper, we designed and implementation of AIGT system through adopting GAP of international standard for safety inspection of agricultural product and traceability. Also, we building of AIGT system through introduce of monitoring system and guidance as well as management system for offered to information by customer and helped farm management by producer.

• Journal of Information Technology Services
• /
• v.15 no.4
• /
• pp.63-72
• /
• 2016

Critical infrastructure has been operating in a closed environment with a completely separate information system and in the private area. However, with the current ICT environment changes due to convergence and open platforms it has increased the threats and risks to critical infrastructure. The importance of cyber security is increasing in the infrastructure control system, such as the outbreak of Ukraine blackout in 2015 by a malicious code called 'black energy'. This thesis aims to recognize the importance and necessity of protecting the critical infrastructure service, designing a security framework reflecting environmental and characteristic changes, and analyzing the management system suitable for a security framework. We also propose a theoretical basis for constructing a new security framework by comparing and analyzing seven international security management system standards, such as NIST 800-82 and IEC 62443-2-1, which are used in the control system. As a result, the environment surrounding critical infrastructure changes with the characteristics of connectivity, openness, and finality was studied, and as a response to this, many scholars and institutions present critical infrastructure security frameworks as cycle enhancement type structures, risk management structures, and management domain expansion structures. In response, the security framework encompassing these structures, CISF (Critical Infrastructure Security Framework), was designed. Additionally, through the security related international standard and criterion analysis, as a newly designed security standard suitable for CISF, IEC 62443-2-1 is reviewed and suggestions are made.