• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.1056-1063
• /
• 2008

This paper describes an efficient design of a multi-standard Viterbi decoder that supports multiple constraint lengths and code rates. The Viterbi decoder is parameterized for the code rates 1/2, 1/3 and constraint lengths 7,9, thus it has four operation nodes. In order to achieve low hardware complexity and low power, an efficient architecture based on hardware sharing techniques is devised. Also, the optimization of ACCS (Accumulate-Subtract) circuit for the one-point trace-back algorithm reduces its area by about 35% compared to the full parallel ACCS circuit. The parameterized Viterbi decoder core has 79,818 gates and 25,600 bits memory, and the estimated throughput is about 105 Mbps at 70 MHz clock frequency. Also, the simulation results for BER (Bit Error Rate) performance show that the Viterbi decoder has BER of $10^{-4}$ at $E_b/N_o$ of 3.6 dB when it operates with code rate 1/3 and constraints 7.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.2
• /
• pp.65-73
• /
• 2008

Security layer of the Cdma2000 1x EV-DO is currently completing standard (C.S0024-A v2.0). Accordingly, a hardware security devices, that allows to implementation requirement of the security layer described in standard document, is required to apply security function about data transferred between AT and AN of then Cdma2000 1x EV-DO environment. This paper represents design of hardware device providing EV-DO security with simulation of the security layer protocol via the FPGA platform. The SHA-1 hash algorithm for certification and service of packet data, and the AES, SEED, ARIA algorithms for data encryption are equip in this device. And paper represents implementation of hardware that applies optionally certification and encryption function after executing key-switch using key-switching algorithm.

• Journal of the Korean Society of Safety
• /
• v.36 no.3
• /
• pp.74-80
• /
• 2021

Korea Atomic Energy Research Institute (KAERI) has been operating an integral effects test facility, the Advanced Thermal-Hydraulic Test Loop for Accident Simulation (ATLAS), according to APR1400 for transient experimental and design basis accident simulation. Moreover, based on the experimental data, the domestic standard problem (DSP) program has been conducted in Korea to validate system codes. Recently, through DSP-05, the performance of the passive auxiliary feedwater system (PAFS) in the event of multiple steam generator tube rupture (MSGTR) has been analyzed. However, some errors exist in the reference input model distributed for DSP-05. Furthermore, the calculation results of the heat loss correlation for the secondary system presented in the technical report of the reference indicate that a large difference is present in heat loss from the target value. Thus, in this study, the reference model is corrected using the geometric information from the design report and drawings of ATLAS. Additionally, a new heat loss correlation is suggested by fitting the results of the heat loss tests. Herein, MSGTR-PAFS accident analysis is performed using MARS-KS 1.5 with the improved model. The steady-state calculation results do not significantly differ from the experimental values, and the overall physical behavior of the transient state is properly predicted. Particularly, the predicted operating time of PAFS is similar to the experimental results obtained by the modified model. Furthermore, the operating time of PAFS varies according to the heat loss of the secondary system, and the sensitivity analysis results for the heat loss of the secondary system are presented.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.4 s.56
• /
• pp.107-115
• /
• 2009

The number of railway tunnel design is increasing recently compare to a great number of highway tunnel design which had increased with a lot of highway construction in the 70's and 80's. Therefore, there is more or less difference of time between highway tunnel and railway tunnel. In this paper, numerical analysis on two kinds of tunnels, such as two-forked road highway ventilation tunnel and double track railway tunnel with 4.3m of center line, in cases of with support materials condition and without support materials condition were conducted. Finally, stability of two kinds of tunnels were compared and analyzed through comparing of principal stresses and deviator stresses in the near base rock of tunnels using results of numerical analysis.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.2
• /
• pp.125-134
• /
• 2024

The Safe Operating Envelope (SOE) combined with Short-Take-Off and Vertical Landing (STOVL) performance is an essential consideration of a light aircraft carrier for design of hull shape with excellent seakeeping performance in terms of naval air operations as well as traditional naval ship missions such as Transit and Patrol (TAP), and Replenishment at Sea (RAS) and so on. A variety of procedures are systematically combined to determine SOE considering rather complicated missions associated with operation of aircraft onboard. The evaluation of take-off and landing safety missions onboard should consider wind effect on deck and severer seakeeping indices and standards compared with conventional naval ships. In order to support take-off and landing missions, various support activities of the crews are required. So, additional evaluation is needed for indicators such as MSI(Motion sickness Index) and MII(Motion Induced Interruptions), which are quantitative indicators of work ability that appear as a result of motion response. In this study, a standard procedure is developed including the seaworthiness performance indicators, standards, and evaluation procedures that should be considered during design of STOVL aircraft carrier. Analysis results are discussed in terns of air-wake on deck as well as seakeeping indices associated with design parameter changes in view of conceptual design of a light aircraft carrier.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.27 no.3
• /
• pp.71-78
• /
• 2021

Purpose: It is important to plan the ward module at a time when the size of beds, the floor area, and the construction budget are all set prior to the hospital design. In this context this study aims (1) to derive various factors affecting the ward module, and (2) to analyze the appropriate room module according to the type. Methods: Design factors related to hospital modules are derived through precedential studies, and the types of ward elevation are classified by reviewing the drawings of 18 case hospitals. And the detailed dimensions and area of the derived elements are analyzed. Results: The X-axis modules of the ward are switched to long span structural columns of 9.9 m, 12.6 m and 13.2 m, but the ward modules still represent 6.6 m. The Y-axis module of the ward shows a dimension of 9 to 9.9m in the process of changing a multi-person room into a four-person room. Type A of curtain wall with columns located on the wall of the room and type B of curtain wall located in the center of the room are analyzed due to their variations. The square window type, which forms the elevation of the square window by exposing the columns to the elevation, and the outframe type, which protrudes from the structural columns and beams, have elevation designs limited. There are, however, no obstacles to the interior space of the hospital room, so the wall composition and furniture arrangement are expected to be free. The ward area of Curtain Wall Type A, which can secure an effective area of 5.9m*5.0m, are 52.1m². The Curtain Wall Type A, Square window type, and the outframe type are 49.8m². Implications: As part of the hospital standard module plan for economical and reasonable hospital building planning, a type was proposed in this study in conjunction with the external design. It is hoped that it be a base for standard module research linked together to the Central Treatment department, Outpatient department and underground parking lot.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.8
• /
• pp.137-148
• /
• 2008

In this study, 28 earthquake records with magnitudes from 5.3 to 7.9 are selected for dynamic analysis in order to assess applicability of the earthquakes for domestic seismic design. The assessment is performed using the seismic spectrum analysis of energy and acceleration. Based on results of the analysis, four acceleration time histories, which satisfy the Korean design standard response spectrum, are proposed. From the dynamic analysis using earthquake magnitudes from 6.4 to 7.9, it is found that horizontal displacements corresponding to earthquake magnitudes greater than 7 are two times larger than those with magnitude 6.5. Therefore, it can be stated that use of strong earthquakes, such as Miyagiken-ken-oki earthquake (Ofunato, $M_{JMA}=7.4$) and Tokachi-oki earthquake (Hachinohe, $M_{JMA}=7.9$), for the seismic design in Korea is not applicable, and may prove to be excessively conservative due to overestimated seismic force. From the dynamic analyses using the proposed acceleration time histories, effects of caisson quay wall dimension and the subsoil condition are investigated as well. The simplified design charts to evaluate horizontal displacements of caisson quay wall are also proposed based on earthquake magnitude 6.5 that is appropriate in Korea.

• International Journal of Contents
• /
• v.5 no.4
• /
• pp.81-87
• /
• 2009

In the midst of a continued discourse and development concerning design education and its impact on innovation and creativity, I believe that design education still holds the key to enhancing design methodology while increasing creativity by having students take on several creative roles in an interactive and enjoyable studio course. Clearly, there exist impediments that block the creative process in our standard track in design education; however, a course entitled "The Creative Workshop" can overcome such obstacles. Through this course, a student can learn the essential skills of a designer: inventive thinking, a sense of aesthetics, and a spirit of collaboration. In addressing each of the three essential elements, this course has devised role-plays in the way of projects. Simply put, students will be required to demonstrate and, therefore, express their unique creativity that may have otherwise gone muted. Such creative expression can take form in a low stakes, open forum that heralds the invaluable attribute in design such as creative freedom. As a result, the true spirit of creativity is fostered rather than mere aesthetics and styling. Moreover, through role plays, the focus shifts its center from design, allowing each student to explore the uncharted areas of one's own creativity which may come naturally to some extend while disconcerting to others. It may prove particularly uncomfortable for Korean students whose ideas about education have been directly connected to the strict and regimented school system that stresses adherence to standardization such as the national college entrance exam. This course, therefore, is aimed stretch the scope and scale of students' creativity as they learn to collaborate on role plays, utilizing diverse skills from various disciplines.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.5
• /
• pp.45-50
• /
• 2004

Currently, structural design of wood structure has been based on ASD (Allowable Structural Design) in Korea. However, the results from this method was known as greater than real value because variations of materials and various conditions were not considered sufficiently. So the study about the design method with probabilistic approach is being performed to overcome this problem. And the standard design method of RBD (Reliability Based Design) has been established and applied. In this study, to apply this method on the domestic wood, the distribution property of the lumber and Glulam was analyzed from the previous report and the basis of the standardized design method was established as soft conversion method from allowable stress used in ASD into reference resistance used in RBD. And through the additional study about the sample size as a important factor to effect on soft conversion, condition to be required in more accurate conversion was evaluated.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.4
• /
• pp.307-311
• /
• 2004

This paper presents an efficient architecture that optimizes the design of SEED S-box using composite field arithmetic. SEED is the Korean standard 128-bit block cipher algorithm developed by Korea Information Security Agency. The nonlinear function S-box is the most costly operation in terms. of size and power consumption, taking up more than 30% of the entire SEED circuit. Therefore the S-box design can become a crucial factor when implemented in systems where resources are limited such as smart cards. In this paper, we transform elements in $GF(2^8)$ to composite field $GF(((2^2)^2)^2)$ where more efficient computations can be implemented and transform the computed result back to $GF(2^8)$. This technique reduces the S-box portion to 15% and the entire SEED algorithm can be implemented at 8,700 gates using Samsung smart card CMOS technology.