• Korean Journal of Construction Engineering and Management
• /
• v.17 no.1
• /
• pp.28-39
• /
• 2016

Since 2002, Korea Government has introduced Green Standard for Energy and Environmental Design Certification for reducing GHG emission in building area. However, total number of G-SEED Certification is only around 1% of total number of approved apartment buildings despite the various boosting policies. In this situation, most boosting policies and policy improvement researches are leaning toward the supplier's aspect. However, comprehensive relation and dynamics between consumer and supplier has to be considered because housing market is operated by market participants' mutual interaction. Therefore, this research presents system dynamics models based on decision making analysis of consumer and supplier in G-SEED Certification apartment building market. Then, this research evaluate the validity of boosting policies using the model. The proposed analysis can assist government to make next G-SEED Certification boosting policy.

• KIEAE Journal
• /
• v.17 no.3
• /
• pp.15-21
• /
• 2017

Purpose: "Building energy design standard" is used to limit the thermal transmittance of building in Korea. However, it only covers the insulation standard for each appropriate elements of a building, not the thermal performance of Junction thermal bridge of windows and doors installed in wall. Therefore in this study, we have evaluated the thermal performance of Junction thermal bridge depending on installation method and position of windows and provide it as design data. Method: We analyzed heat transfer of 4-Track sliding window and tilt & turn triple glazed window that are placed in the first class category on window energy efficiency rating using Window 7.4 and Therm 7.4. Result : First, linear thermal transmittance of 4-Track sliding window differs by 2.2 times or more depending of installation method and location. It is higher than the linear thermal transmittance, 0.01W/mK, proposed by Passivhaus. Second, linear thermal transmittance of Tilt & turn triple glazed window differs by 7.7 times or more depending of installation method and location. The average linear thermal transmittance was less than 0.01W /mK when windows were installed on the internal wall insulation by the fixed hardware attachment method. Third, the thermal losses of a window caused by a junction thermal bridge are inversely proportional to the window area and converge gradually as the area increased.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.8 no.1
• /
• pp.97-110
• /
• 2006

The value that evaluates ancient Oriental civilization and culture is Hwa-i-kwan(華夷觀: the view that China is only good country and the others are savages) as Confucianism. Generally, Hwa-i-kwan(華夷觀) includes cultural Hwa-i-kwan(華夷觀) as Confucian culture is only superior, Han-centered racial Hwa-i-kwan(華夷觀), and country-centered geographical Hwa-i-kwan(華夷觀). As times goes on, instead racial and geographical Hwa-i-kwan(華夷觀) is diluted, cultural Hwa-i-kwan(華夷觀) was just emphasized. The value of cutural Hwa-i-kwan(華夷觀) is presented on dressing system and hair style becoming an issue in Confucian culture. This study intends to research how Hwa-i-ron in latter period of Chosun influenced the view of Ching men's hair style, pigtail. For this study, 5 books of Yeon-hang-rok in $17{\sim}18$ centuries are chosen, but some parts of them would be selected concerning with hairdressing and would be studied with other documents. Hwa-i-kwan(華夷觀) had dominated in the latter period of Chosun and had been making proprieties, then geographical and racial Hwa-i-kwan(華夷觀) were disappeared when Ching had been building a big cultural country, but cultural Hwa-i-kwan(華夷觀) had been stronger in latter period of Chosun than before, it had been a standard in all proprieties. After all, not only did cultural Hwa-i-kwan(華夷觀) become a standard of all proprieties in Chosun, but it was applied to the view of Ching men's hairstyle. So, people thought that pigtail, Ching men's hairstyle, is a custom of the savages. out of Chinese proprieties. Therefore, this cultural Hwa-i-kwan(華夷觀) that Chosun is a real China through taking over Chinese proprieties might be in that age.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.11
• /
• pp.1055-1064
• /
• 2017

Since a device such as a rocket motor requires very high reliability, a reasonable reliability design process is essential. However, Korea has implemented a design method for applying a safety factor to each component. In classic reliability analysis, input variables such as mean and standard deviation, used in the limit state function, are treated as deterministic values. Because the mean and standard deviation are determined by a small amount of data, this approach could lead to inaccurate results. In this study, reliability analysis is performed for bolted joints and o-ring seals, and the Bayesian approach is used to statistically estimate the input variables. The estimated variables and failure probability, calculated by the reliability analysis, are derived in the form of probability distributions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1877-1882
• /
• 2013

Smart Utility Network (SUN) is not only a core technology of intelligent green home networks but also a future technology which can be applicable to various areas instead of ZigBee. SUN should be compliment with IEEE 802.15.4g standard and can provide high link margin and stable communication data-rate for poor communication surrounding. This paper describes how to design the system simulation environment for the SUN RF transceiver, and also reports the required block-level specification for each circuit and various implementation impairments. Finally, the measured performances of the fabricated RF transceiver, which has utilized the system simulation results, completely satisfies the IEEE 802.15.4g SUN PHY standard.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.501-506
• /
• 2001

The Korean government established a domestic specification system, and regulated that owner should produced construction project specifications, instead of special provisions, in design phase, January 1998. But in Korea the ability of construction engineers for construction project specification are insufficient. So the government had built up a database of standard specifications and developed a supporting system for writing construction project specification(SPECMAKE) in 1999. However, it is a PC base stand-alone system, so it is not convenient to update the database. In order to overcome these limitations, the purpose of this paper builds up a database of construction criteria and develops a automatic writing system for construction project specification on web base. The database contains standard specifications, design and construction guidelines related with construction business. And this paper describes the frameworks, the components, and the functions of the specifications writing system for the construction projects.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.72-81
• /
• 2014

This paper reports the test results of reinforced concrete exterior beam-column joints with high-strength concrete. The main parameters of eight specimens were joint failure modes, the compressive strength of concrete, and the head shapes of steel bars. All specimens were designed according to ACI 352R-02 design recommendations. Two types of failure modes were considered; J-failure and BJ-failure. The longitudinal steel bars were anchored by 90 degree standard hooks or headed reinforcement. Experimental results indicated that the current ACI design recommendation limited by the compressive strength of concrete somewhat underestimated the strength of beam-column joints with high-strength concrete. In the specimens showed joint shear failure, the strength of beam-column joints with headed bars was approximately 10 percent higher than that of joints with 90 degree standard hooks.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.1
• /
• pp.92-102
• /
• 2004

Performance assessment was introduced to improve self-directed learning and method of assessment for differenced learning when the seventh educational curriculum was enforced. Written examinations often fail to properly assess students higher thinking abilities ad problem solving abilities. Performance assessment addresses this drawback and also allows normalization of class and school quality. However, performance assessment also has drawbacks that could lead to faulty assessment due to lack of fairness, reliability and validity of grading, ambiguity of grading standard etc. This study proposes a fuzzy performance assessment system to address the drawbacks of the conventional performance assessment. This paper presents in objective and reliable performance assesment method through fuzzy reasoning, design of fuzzy membership function. We define a fuzzy rule analyzing factor that influences in each sacred ground of performance assessment and accounts for the principle subject The proposed performance assessment method divides into three categories, namely, formation estimation subject estimation and design of membership function. Performance assessment result that is worked through fuzzy performance assessment system can reduce the burden of appraisal's fault and provide. We fair and reliable assessment results through grading that have correct standard mid consistency to students.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.554-562
• /
• 2004

It was recommended for all ship engaged in international voyages to carry the Satellite Emergency position Indicating Radio Beacon according to Global Maritime Distress ＆ Safety System but also it is tending to be diffused to require the satellite EPIRB installed in small vessel such as a fishery boat by domestic regulations of each countries. Otherwise the domestic regulation can't evaluate exactly the compatibility with the satellite system and the performance of the equipment itself required by international regulation. And even if it is required the performing of the performance inspection in accordance with international regulation, it is difficult to grasp the characteristics of equipment by a generalized measuring equipment. Hence this study performed the measurement for the matters related with an wave forms, modulation characteristics, frequency and the power, etc through the design and implementation of the test bench capable of ensuring most of test items regulated by international regulation. Through this study, it has been paved the way being capable of preparation of the standard regarding to transmission repetition period, phase variation and frequency stability related with the system compatibility and in conclusion, it is enable to improve the performance of a main distress communication equipment directly connected with the life of a survivor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2451-2461
• /
• 2014

Mobile application is software executing on smart devices regardless of the time and place. Many individuals and companies have provided a lot of mobile applications services. However, there is not certain standard in terms of application's quality evaluation because study is deficient compared with increase amount of development of mobile application. Moreover, mobile application basically has many special characteristics. For these reasons mobile application is required special standard of quality different from general software. To satisfy these needs, I design and propose mobile application evaluation model. Evaluation model is mapped by characteristics of mobile application based on ISO/IEC 25000's quality characteristics and propose each quality characteristics and metrics. For verification, scenario-based studies were applied to quality model and carried out.