• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.371-377
• /
• 2008

In order to obtain fundamental knowledge of atomization, the three dimensional unsteady phenomenon of pinch off was numerically studied by developed method. Not only liquid shapes but also velocity distributions of numerical results were compared with corresponding experimental ones. They showed satisfactorily good agreement at least in a qualitative sense. The liquid jet shapes, the pressure and velocity distributions, and the inner flow structures were clarified through the comparisons of distinctly different flow fields due to presence or absence of surface tension. The condition of pinch off, which had close correlation with fluid acceleration at injection, was clearly specified.

• Wind and Structures
• /
• 제16권6호
• /
• pp.617-627
• /
• 2013

In wind load calculations based on pressure measurements, the concept of 'tributary area' is usually used. The literature has less guidance for a systematic computational methodology for calculating tributary areas, in general, and for scattered pressure taps, in particular. To the best of the author's knowledge, there is no generic mathematical equation that helps calculate the tributary areas for irregular pressure taps. Traditionally, the drawing of tributary boundaries for scattered and intensively distributed taps may not be feasible (a time and resource consuming task). To alleviate this problem, this paper presents a proposed numerical approach for tributary area calculations on rectangular surfaces. The approach makes use of the available coordinates of the pressure taps and the dimensions of the surface. The proposed technique is illustrated by two application examples: first, quasi-regularly distributed pressure taps, and second, taps that have scattered distribution on a rectangular surface. The accuracy and the efficacy of the approach are assessed, and a comparison with a traditional method is presented.

• Structural Engineering and Mechanics
• /
• 제25권6호
• /
• pp.691-716
• /
• 2007

The purpose of the present work is to establish a method for predicting the location and depth of a crack in a circular cross section beam by only considering the frequencies of the cracked beam. An accurate knowledge of the material properties is not required. The crack location and size is identified by finding the point of intersection of pulsation ratio contour lines of lower vertical and horizontal modes. This process is presented and numerically validated in the case of a simply supported beam with various crack locations and sizes. If the beam has structural symmetry, the identification of crack location is performed by adding an off-center placed mass to the simply supported beam. In order to avoid worse diagnostic, it was demonstrated that a robust identification of crack size and location is possible if two tests are undertaken by adding the mass at the left and then right end of the simply supported beam. Finally, the pulsation ratio contour lines method is generalized in order to be extended to the case of rectangular cross section beams or more complex structures.

• Imaging Science in Dentistry
• /
• 제49권3호
• /
• pp.219-228
• /
• 2019

Purpose: The aim of this study was to determine the reasons and solutions for intraoral phosphor storage plate (PSP) image artifacts and errors, and to develop an appropriate classification of the artifacts. Materials and Methods: This study involved the retrospective examination of 5,000 intraoral images that had been obtained using a phosphor plate system. Image artifacts were examined on the radiographs and classified according to possible causative factors. Results: Artifacts were observed in 1,822 of the 5,000 images. After examination of the images, the errors were divided into 6 groups based on their causes, as follows: images with operator errors, superposition of undesirable structures, ambient light errors, plate artifacts (physical deformations and contamination), scanner artifacts, and software artifacts. The groups were then re-examined and divided into 45 subheadings. Conclusion: Identification of image artifacts can help to improve the quality of the radiographic image and control the radiation dose. Knowledge of the basic physics and technology of PSP systems could aid to reduce the need for repeated radiography.

• Steel and Composite Structures
• /
• 제31권6호
• /
• pp.641-653
• /
• 2019

In this paper, wave propagation is studied and analyzed in double-layered nanotubes systems via the nonlocal strain gradient theory. To the author's knowledge, the present paper is the first to investigate the wave propagation characteristics of double-layered porous nanotubes systems. It is generally considered that the material properties of nanotubes are related to the porosity and hygro-thermal effects. The governing equations of the double-layered nanotubes systems are derived by using the Hamilton principle. The dispersion relations and displacement fields of wave propagation in the double nanotubes systems which experience three different types of motion are obtained and discussed. The results show that the phase velocities of the double nanotubes systems depend on porosity, humidity change, temperature change, material composition, non-local parameter, strain gradient parameter, interlayer spring, and wave number.

• Computers and Concrete
• /
• 제24권3호
• /
• pp.271-282
• /
• 2019

Concrete undergoes a series of thermo-based physio-chemical changes once exposed to elevated temperatures. Such changes adversely alter the composition of concrete and oftentimes lead to fire-induced explosive spalling. Spalling is a multidimensional, complex and most of all sophisticated phenomenon with the potential to cause significant damage to fire-exposed concrete structures. Despite past and recent research efforts, we continue to be short of a systematic methodology that is able of accurately assessing the tendency of concrete to spall under fire conditions. In order to bridge this knowledge gap, this study explores integrating novel artificial intelligence (AI) techniques; namely, artificial neural network (ANN), adaptive neuro-fuzzy inference system (ANFIS) and genetic algorithm (GA), together with traditional statistical analysis (multilinear regression (MLR)), to arrive at state-of-the-art procedures to predict occurrence of fire-induced spalling. Through a comprehensive datadriven examination of actual fire tests, this study demonstrates that AI techniques provide attractive tools capable of predicting fire-induced spalling phenomenon with high precision.

• Natural Product Sciences
• /
• 제28권3호
• /
• pp.115-120
• /
• 2022

Ten compounds, consisting of neoflavonoids (1-5), isoflavonoids (6 and 7), flavanone (8), and chalcones (9 and 10) were isolated from the ethyl acetate and n-butanol-soluble fractions of the heartwood of Dalbergia melanoxylon. The chemical structures were identified on the basis of spectroscopic evidence and compared to previously reported spectra. Compounds 1-10 were evaluated for cytotoxicity against HCT116 human colorectal cancer, MDA-MB-231 human metastatic breast cancer, and A2058 human melanoma cell lines. Among them, compounds 3 and 10 showed the strongest cytotoxic activity with IC₅₀ values of 11.92±1.07 μM, 10.83±1.02 μM, and 14.37±1.02 μM, 13.62±1.09 μM against HCT116 and MDA-MB-231 cell lines, respectively. Compounds 9 and 10 also had cytotoxic activity with IC₅₀ values of 13.49±1.18 μM and 9.82±0.91 μM against A2058 cell lines, respectively. To the best our knowledge, compounds 2 and 5-10 were isolated from this source for the first time.

• Medical Lasers
• /
• 제9권2호
• /
• pp.184-186
• /
• 2020

Lower eyelid blepharoplasty is a popular facial rejuvenation surgery that restores the infraorbital region. The procedure is performed by removing excessive fatty tissues, muscles, and other unnecessary structures. The structure of the eyelid differs from person to person and is quite complex; therefore, numerous side effects are expected. Common lower eyelid blepharoplasty complications are asymmetrical faces, retrobulbar hemorrhage, blurred vision, and ectropion. This paper reports a case of a prominent periorbital vein after lower eyelid blepharoplasty. The prominent periorbital vein after surgery is a rare side effect that has not been reported to the best of the author's knowledge. This case was treated with a long-pulse 1,064-nm neodymium:yttrium-aluminum-garnet laser.

• Wind and Structures
• /
• 제32권4호
• /
• pp.393-403
• /
• 2021

A comprehensive knowledge of the wind flow in hilly terrains is of great interest in many engineering applications, be it wind energy distribution for suitable site selection for wind farms, pollution dispersion, forest fire propagation or agrometerological studies. Several researchers have shown that wind flow over a hilly terrain may be significantly different when compared with the wind flow over a flat terrain. Complex hilly terrains may alter the wind speed to a great extent. Therefore, this effect of terrain must be properly assessed by designers and planners to arrive at a proper wind flow distribution. This paper reviews the work done in this area over the past three decades. Wind flow over two-dimensional hills and two-dimensional escarpments investigated in wind tunnels by various researchers is presented in this paper.

• Natural Product Sciences
• /
• 제28권2호
• /
• pp.62-67
• /
• 2022

Column chromatographic fractionation of the methanol and ethyl acetate extracts of the stem-bark of Anacardium occidentale led to the isolation of five compounds (1-5). Their structures were determined by spectroscopic means by comparing spectral data to be β-sitosterol (1), 2,4-dihydroxy acetophenone (2), 1-monolinolein (3), ethyl oleate (4) and β-sitosterol-3-O-β-D-glucopyranoside (5). These compounds were evaluated for cytotoxicity against human cancer cell lines: A549, SCOV3 and rat normal cell line NRK49f. Compounds 2-5 were for the first time isolated from A. occidentale.