• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.51-53
• /
• 2005

Considerable noise is sometimes associated with degeneration of the hee joint surface. Such noise may indicate roughness or softening of the cartilage surfaces, and may be a useful index for early disease. In this study, we have evaluated arthritic pathology using the acoustical analysis of knee joint sounds. During sitting and standing periods, subjects' active knee flexion and extension were monitored. Fundamental frequency, mean amplitude of pitch, jitter and shimmer were analyzed according to the position and the joint angle. The result showed that the fundamental frequency of the 2nd patient group and standing position was higher than the others, and that the pitch of sounds changed unstably. These results suggest that an analysis of knee joint sound might assist non-invasive diagnosis of an articular pathology.

• Journal of Mechanical Science and Technology
• /
• 제19권10호
• /
• pp.1919-1931
• /
• 2005

Human joint motion can be kinematically described in three planes, typically the frontal, sagittal, and transverse, and related to experimentally measured data. The selection of reference systems is a prerequisite for accurate kinematic analysis and resulting development of the equations of motion. Moreover, the development of analysis techniques for the minimization of errors, due to skin movement or body deformation, during experiments involving human locomotion is a critically important step, without which accurate results in this type of experiment are an impossibility. The traditional kinematic analysis method is the Angular-based method (ABM), which utilizes the Euler angle or the Bryant angle. However, this analysis method tends to increase cumulative errors due to skin movement. Therefore, the objective of this study was to propose a new kinematic analysis method, Position-based method (PBM), which directly applies position displacement data to represent locomotion. The PBM presented here was designed to minimize cumulative errors via considerations of angle changes and translational motion between markers occurring due to skin movements. In order to verify the efficacy and accuracy of the developed PBM, the mean value of joint dislocation at the knee during one gait cycle and the pattern of three dimensional translation motion of the tibiofemoral joint at the knee, in both flexion and extension, were accessed via ABM and via new method, PBM, with a Local Reference system (LRS) and Segmental Reference system (SRS), and then the data were compared between the two techniques. Our results indicate that the proposed PBM resulted in improved accuracy in terms of motion analysis, as compared to ABM, with the LRS and SRS.

• 한국전문물리치료학회지
• /
• 제19권3호
• /
• pp.98-104
• /
• 2012

The aim of this study was to examine the effects of repeated passive movement (RPM) of different velocities on the improvement of knee joint position sense (JPS) in post-stroke patients with hemiplegia, thereby investigate the possibility of clinical application in the initial stage of rehabilitation for patients with post-stroke hemiplegia. Thirteen hemiplegic patients participated in this study. For the subjects' knee JPS tests, a passive angle reproduction test and an active angle reproduction test were performed prior to and after the intervention, which involved 30 repetitions of passive full-range-of-motion flexion and extension exercise of the knee joints at randomized degrees of $0^{\circ}/s$, $45^{\circ}/s$, and $90^{\circ}/s$. Paired t-test analysis was done in order to compare changes in the pre- and post-intervention knee JPS. One-way repeated analysis of variance was used in order to compare changes in JPS after intervention at three different movement velocities. The level of significance was set at .05. The result was that the subjects' post-intervention knee JPS significantly improved after the RPM exercise at a $45^{\circ}/s$ and a $90^{\circ}/s$ relative to the RPM exercise $0^{\circ}/s$ (p<.05). JPS changes with RPM intervention at the rapid velocity of $90^{\circ}/s$ were most increased, suggesting the most effective enhancement in knee JPS is with intervention at the velocity (p<.05). Therefore, RPM intervention at a half or higher velocity improved stroke patients' knee JPS. During the initial stage of rehabilitation for patients with post-stroke hemiplegia, the efficient application of the RPM exercise at a half or higher velocity will be possible.

• 한국운동역학회지
• /
• 제28권3호
• /
• pp.175-180
• /
• 2018

Objective: Anterior cruciate ligament reconstruction (ACLR) has been considered the primary treatment for anterior cruciate ligament (ACL) injured patient. However, there is little biomechanical evidence regarding bilateral knee joint biomechanics during landing and cutting task after ACLR. Method: Eighteen females with ACLR participated in this investigation. Double leg jump landing (DLJL) and single leg jump cut (SLJC) biomechanics were assessed. Results: During DLJL, the healthy knee showed greater knee valgus angle at initial contact ($^{\circ}$) compared to the injured knee (Injured: $2.93{\pm}2.59$, Healthy: $4.20{\pm}2.46$, t=2.957, p=0.009). There was a significant difference in anterior tibial shear force ($N{\times}N^{-1}$) with greater in the injured knee (Injured: $1.41{\pm}0.39$, Healthy: $1.30{\pm}0.35$, t=2.201, p=0.042). During SLJC, injured knee showed greater knee extension moment ($N^*m{\times}[N^*m]^{-1}$) compared to healthy knee (Injured: $0.51{\pm}0.19$, Healthy: $0.47{\pm}0.17$, t=2.761, p=0.013). However, there was no significant differences between the knees in the other variables. Conclusion: ACLRfemales exhibited a greater knee valgus angle at initial contact and lesser anterior tibial shear force on the healthy knee during double leg jump landing. In addition, ACLR females showed a greater knee extension moment on the injured knee during single leg jump cut.

• 한국운동역학회지
• /
• 제28권1호
• /
• pp.1-8
• /
• 2018

Objective: The purpose of this study is to investigate the differences in biomechanical variables of golf driving motion according to gender. Method: A total of 21 healthy golfers (11 men and 10 women) who have more than 5 years of professional experience and have been registered in the Korea Golf Association was recruited. A 250-Hz 8-camera motion capture system (MX-T20, Vicon, LA, USA) was used to capture the motion trajectories of a total of 42 reflective markers attached to the golfer's body and club. Moreover, two 1,000-Hz AMTI force plates (AMTI OR6-7-400, AMTI, MA, USA) were used to measure the ground reaction force. The mean and standard deviation for each parameter were then calculated for both groups of 21 subjects. SPSS Windows version 23.0 was used for statistical analysis. The independent t-test was used to determine the differences between groups. An alpha level of .05 was utilized in all tests. Results: There were differences in joint angles according to gender during golf driver swing. Men showed a statistically significantly higher peak joint angle and maximum range of angle in sagittal and frontal axis of the pelvis, hip, and knee. Moreover, women's swing of the pelvis and hips was found to have a pattern using the peak joint angle and range of angle in the vertical axis of the pelvis and hip. There were the differences in peak joint moment according to gender during golf driver swing. Men used higher joint moment in the downswing phase than women in the extensor, abductor, and external rotator muscles of the right hip; flexor and adductor muscles of left hip joint; and flexor and extensor muscles of the right knee. Conclusion: This result reveals that male golfers conducted driver swing using stronger force of the lower body and ground reaction force based on strength of hip and thigh than female golfers.

• 대한인간공학회지
• /
• 제25권4호
• /
• pp.93-101
• /
• 2006

This study examined whether there is a transfer effect to other joint angles and the angular specificity of muscle fatigue after 6 weeks of isometric training of the vastus medialis. Twenty subjects were randomly assigned to 30° and 90° knee flexion groups and were trained at 80% maximal voluntary isometric contraction(MVIC) three times a week for 6 weeks. The pre-and post-training values of the 80% holding time(endurance time) of MVIC, the Fatigue Index(FI), and the MVIC at 30°, 60°, and 90° were compared. After isometric training for 6 weeks, in the 30° knee flexion group, FI decreased significantly(p<0.05) only at 30°, which was the training angle; there was no change at other angles. By contrast, in the 90° knee flexion group, FI decreased significantly(p<0.05) at both the trained angle and at the other angles, indicating a transfer effect of training. MVIC did not increase significantly(p<0.05) at any trained angle in either the 30° or 90° knee flexion groups after 6 weeks of isometric training, neither did the 80% holding time of MVIC differ significantly compared with pre-training in either group. These findings suggest that training at 90° of knee flexion is more effective than training at 30° of knee flexion for obtaining a training transfer effect on muscle fatigue in the vastus medialis.

• 산업기술연구
• /
• 제28권A호
• /
• pp.167-176
• /
• 2008

Recently, lots of studies are performed in developing of active orthosis. Exact and simple muscle force estimation is important in developing orthosis which assists muscle force for disabled people or physical laborers. Hill-type muscle model dynamics is common method for estimation of muscle forces. In Hill-type muscle model, we must know muscle length and moment arm which largely affect muscle force. And several methods are proposed to estimate muscle length and moment arm using joint angle. In this study, we compared estimation results of those method with data from body model of opensim to find which method is exact for estimation of muscle length and moment arm.

• 수산해양교육연구
• /
• 제25권3호
• /
• pp.690-696
• /
• 2013

This study, which is conducted on two groups of skilled people and unskilled people, is purposed to analyze joint angle of lower extremity during short track speed skating in order to find out efficient body position and propose ideal training method. Short Track Speed Skating has a wide range of research areas, but their findings indicate a promising area for further research. Targeting 8 people who are skilled in short track speed skating and 8 people who are not skilled in it, this study analyzes three dimensional images using super-high speed camera to compare differences between these two groups of people. In this study, 6 sections of body positions including right foot push-off, right foot recovery, right foot basic position, left foot push-off, left foot recovery, and left foot basic position were analyzed using 8 super-high speed cameras of VICON. These body positions were analyzed in order to find out joint angles of the hip joint, the knee joint, and the ankle joint. In the section 4 of the inner and outer parts of the left hip angles showed significant difference, and most of the sections of knee joint angles also showed significant difference. In the section 1 and 2 of the plantar flexion, dorsiflexion of ankle joints showed significant difference(p<.001) It was found out that there were differences between groups of skilled people and unskilled people in terms of lower extremity's joint angles such as angles of the hip joint, the knee joint, and the ankle joint.

• 재활복지공학회논문지
• /
• 제7권2호
• /
• pp.139-144
• /
• 2013

다양한 신경계 및 근골격계 질환이 있을 때 나타나는 증상으로 보행변화가 일어나며, 이에 대한 보행분석은 병의 진행 정도를 판단하는 데 매우 중요하다. 대부분의 보행분석 방법으로는 고가의 장비 사용과 공간의 제약을 받고 있다. 본 연구는 스마트 폰을 이용한 촬영 영상과 보행궤적 분석 프로그램을 사용하여, 보행 시 슬관절 각도의 변화와 활보장 측정을 바탕으로 보행분석을 진행하였다. 보행분석에 필요한 실험은 건강한 성인남성 7명을 대상으로 진행하였으며, 오른쪽 및 왼쪽 무릎관절 각도 및 활보장에 대한 데이터를 이용하여 보행분석이 이루어졌다. 본 연구에서 얻어진 보행분석은 기존의 보행분석 연구들과 비교하여 유사한 결과를 획득하였다. 여기서 제안한 방법을 이용한다면 고가의 장비와 공간의 제약없이 보행 분석을 할 수 있을 것이다.

• 국제물리치료학회지
• /
• 제4권2호
• /
• pp.595-599
• /
• 2013

The purpose of this study is to identify the bridge exercise posture for the efficient exercise by comparing the muscle activity of the lower limbs according to the changes in muscle length because of knee angle in bridge exercise. The subjects of this study were 9 randomly selected males in their 20s living in D city from those who satisfied inclusion criteria. The measured muscles were Vastus medialis oblique, Vastus lateralis, Semitendinosus, Biceps femoris, Gluteus maximus, Gluteus medius, Tensor faciae latae, and Adductor longus. Data were analyzed through paired comparison test. In the result, ST, BF, and TFL muscle activities were high when knee joint flexion angle was $90^{\circ}$ Although in most cases higher muscle activity was shown at $90^{\circ}$ than $60^{\circ}$ there was no statistical significance. Interestingly, it was lower at $90^{\circ}$ than $60^{\circ}$ in VL. In ST, BF, and TFL, it was significantly higher at $90^{\circ}$ than $60^{\circ}$ (p<.05). Conclusively, knee angles in bridge exercise may affect the muscle activity, and in particular when the activity of two joint muscles such as semimenbranosus muscle, biceps femoris muscle, and tensor fasciae latae muscle increase as the angle gets higher. Therefore, it is considered that this study will provide helpful tips to develop muscular strength enforcement program for the patients with damages in the lower limbs through bridge exercise in clinical situations.