• Journal of the Korean Ceramic Society
• /
• v.27 no.1
• /
• pp.91-101
• /
• 1990

The green microstructure and sintering behavior of ZrO2 were analyzed in terms of kinetic stability (measured by the stability ratio ; W) and interfacial characteristics of colloidal suspension. Green density and the most frequent pore radius(MFPR) of green body were directly correlated with the stability ratio. These observations were explained using a concept of the critical stability ratio(Wc) and the potential energy of two interacting particles in colloidal suspension. Analysis of the data also indicates that the potential energy barrier between two interacting colloid particles should be higher than its critical value for a fabrication of ZrO2 green body with dense and uniform microstructure. Besides, we have successfully applied a concept of the donoracceptor interaction to increase the kinetic stability of ZrO2 slip and density of green body.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.866-875
• /
• 2001

In this work, thermal decomposition mechanism based on kinetic parameters and thermal stability of carbon fiber-reinforced carbon matrix composites (C/C composites), have been studied under high temperature oxidative conditions with addition of tetra-ethylorthosilicate (TEOS) as an oxidation inhibitor. Thermogravimetric analysis (TGA) was executed to evaluate the thermal decomposition mechanism and thermal stability of C/C composites in the temperature range of 30 ～ $850^{\circ}C$. As a result, the kinetic parameters of the composites impregnated with TEOS, i.e., activation energy for thermal decomposition ($E_d$), order of reaction (n) , and pre-exponential factor (A) were evaluated as 136 kJ/mol, 0, and 2.3$\times$$10^9s^{-1}$, respectively. Especially, the IPDT and $E_d$ of C/C composites impregnated with TEOS were improved largely compared with the composites impregnated without TEOS, due to the formation of $SiO_2$ on composite surfaces, resulting in interrupting the oxygen attack to carbon active site in the composites.

• Physical Therapy Korea
• /
• v.28 no.3
• /
• pp.227-234
• /
• 2021

Background: The serratus posterior inferior (SPI) muscle originates from the spinous process of T11-L2 and inserts at the lower border of the 9-12th ribs. This muscle is involved in thoracolumbar rotation and stability. Several positions can be used to improve trunk stability; the quadruped position is a good position for easily maintaining a neutral spine. In particular, during one arm lifting, various muscles act to maintain a neutral trunk position, and the SPI is one of these muscles. If trunk stability is weakened, uncontrolled trunk rotation may occur at this time. Tape can be used to increase trunk stability. There have been no studies on the effect of taping applied to the SPI muscle on thoracolumbar junction (TLJ) stability. Objects: This study compared the TLJ rotation angle between three different conditions (without taping, transverse taping, and SPI muscle direction taping). Methods: Thirty subjects were recruited to the study (18 males and 12 females). The TLJ rotation angle was measured during one arm lifting in a quadruped position (ALQP). Two taping methods (transverse and SPI muscle direction taping) were applied, and the TLJ rotation angle was measured in the same movement. Results: SPI muscle direction taping significantly reduced TLJ rotation compared to that without taping (p < 0.001) and with transverse taping (p < 0.001). There was a significant difference in the TLJ rotation angle between transverse taping and SPI muscle direction taping (p < 0.017). Conclusion: SPI muscle direction taping reduces the TLJ rotation angle during ALQP. Therefore, SPI muscle direction taping is one method to improve TLJ stability and reduce uncontrolled TLJ rotation during ALQP.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.153-156
• /
• 1992

Transient stability analysis of Korea Electric power Corporation(KEPCO) system is conducted by time simulation method, and the method is robust and reliable. But, time simulation consumes enormous computing resources and engineering time, and it does not provide a measure of the degree of stability of the system. Therefore, this method does not apply to every changed condition appropriately and quickly in planning and operating. And Transient Energy Function (TEF) method whis can assess quickly and quantatively the degree of stability of the system and which judges the stability and the instability to analyse transient dynamic charater of the system by mutual changing kinetic energy and potential energy, is developed. TEF method analyses the first Swing transient stability of the system by using the thought that if after disturbance happening, the increase of all the rotator kinetic energy changes into the potential energy after diturbance clearing, the system is stable, otherwise the system is unstable. This paper represents the availabiIity of the TEF method by comparing with time simulation method on the two cases.

• Journal of The Korean Society of Integrative Medicine
• /
• v.3 no.1
• /
• pp.81-90
• /
• 2015

Purpose: The purpose of this study was to investigate any visible difference in shoulder stability muscle activity along the bending angle($70^{\circ}$, $90^{\circ}$, $110^{\circ}$) to perform the open kinetic chain(OKC) and closed kinetic chain(CKC) exercise. Method: This study was performed on normal 20 males subjects. Exercise was carried out in two ways OKC and CKC. Shoulder stability muscles are examined activity in the bending angles. In the OKC and CKC exercise to subjects with stretched out waist straightened, and than push forward the shoulder. Muscular activation was examined using the WEMG-8. Result: The results of this study were as follows. 1. Only in the trapezius muscle, it showed specific interaction between exercise methods and angles. When it comes to muscle activity, there was no significant difference in all muscles except for the anterior fibers of the deltoid muscle during both CKC and OKC exercise. 2. The average value of maximum muscle activity was significantly increased with increasing order of angles. But in CKC exercise, the muscle activity of infraspinatus tended to decrease with increasing angles. Conclusion: To summarize the research results, the muscle activity in upper fibers of the trapezius, anterior fibers of the deltoid, and serratus anterior was significantly different depending on the angle of the shoulder in both CKC and OKC exercise.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.296-298
• /
• 2002

Irreversible photobleaching of bacteriorhodopsin (bR), namely denaturation induced by illumination of visible light, was investigated by absorption kinetic measurements. The denaturation kinetics revealed that light illumination significantly enhanced the structural decay of bR. The kinetic analyses showed that the molecular structure of bR denatures according to a single-exponential decay, whereas irreversible photobleaching has two decay components. The decay constant of the slow component of photobleaching is almost same as that in the dark. An Arrhenius plot of the denaturation kinetic constants for the fast and slow components showed similar activation energies of approximately 19 kcal/mol.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.6
• /
• pp.428-433
• /
• 1986

It is demonstrated by using a highly positive uranium ion as a test case that the exact relation between the small and the large components of a Dirac spinor in relativistic self-consistent-field (RSCF) calculations is not fully satisfied by the kinetic balance condition only even for two electron systems. For a fixed number of large component basis functions, total energies are sensitive to the change of the size of the small component basis sets even after the kinetic balance condition is fully satisfied. However, the kinetic balance condition appears to be a reasonable guideline in generating reliable and practical basis sets for most applications of RSCF calculations. With a complete small component basis set, energies from RSCF calculations exhibit a variational behavior, implying the stability of the present RSCF procedure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1042-1046
• /
• 2007

In this study, we investigated the mechanism responsible for the thermal stability of CoSi by addition of a foreign chemical element. Addition of W was found to increase the heat of formation of CoSi. This increase was claimed to inhibit the glass formation, which is preferred by silicide formation kinetics depicted by the maximum system energy degradation rate. In this case, there forms at the interface between CoSi and Si wafer a crystalline structure, the effective diffusion coefficient of which is much less than the self-diffusion rate provided by the glass. It was stated that the phase transition requires a higher thermal energy as the consequence, thereby enhancing the thermal stability of CoSi.

• Journal of Society of Preventive Korean Medicine
• /
• v.12 no.3
• /
• pp.115-128
• /
• 2008

Purpose : This study was performed to distinguish the muscle activation of vastus medialis and biceps femoris through open and closed kinetic chain exercise. Methods : 31 healthy male and female students in Daegu Health College were participated in this study. All subjects were conducted three types open and closed kinetic chain exercises to examine muscle activity during the last four seconds using the sEMG system. Collected EMG data were normalized using the maximal voluntary isometric contraction(MVIC). Results : MVIC of each muscle was showed significantly increased(p<0.5). In the case of open chain exercise, the type 3 exercise most increased than type 2 and 3 exercise in vastus medialis than biceps femoris muscle. The closed chain exercise presented type 6 exercise most increased than type 4 and 5 exercise in biceps femoris than vastus medialis. Conclusion : This study finally proved that muscle activity which maintains stability of knee differ from depending on the types of exercises. Therefore, the combination of the two chain exercises is believed to greatly contribute to increments in muscle activity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.371-374
• /
• 2006

We developed new quantum chemical molecular dynamics and kinetic Monte Carlo programs to simulate the destruction processes of MgO protecting layer in plasma display panel. Our simulation results proposed that MgO(111) surface with nano-dot structures covered by (001) facets has the highest stability, which is against the previous knowledge. The formation of nano-dot structures on the MgO(111) surface covered by (001) facets was found to be the reason for the high stability of the MgO(111) surface. Furthermore, the effect of grain boundary on the stability of MgO surfaces was also clarified.