• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.433-433
• /
• 2011

Since the concept of graphene was established, it has been intensively investigated by researchers. The unique characteristics of graphene have been reported, the graphene attracted a lot of attention for material overcomes the limitations of existing semiconductor materials. Because of these trends, economical fabrication technique is becoming more and more important topic. Especially, the epitaxial growth method by sublimating the silicon atoms on Silicon carbide (SiC) substrate have been reported on the mass production of high quality graphene sheets. Although SiC exists in a variety of polytypes, the 3C-SiC polytypes is the only polytype that grows directly on Si substrate. To practical use of graphene for electronic devices, the technique, forming the graphene on 3C-SiC(111)/Si structure, is much helpful technique. In this paper, we report on the growth of graphene on 3C-SiC(111) surface. To investigate the morphology of formed graphene on the 3C-SiC(111) surface, the radial distribution function (RDF) was calculated using molecular dynamics (MD) simulation. Through the comparison between the kinetic energies and the diffusion energy barrier of surface carbon atoms, we successfully determined that the graphitization strongly depends on temperature. This graphitization occurs above the annealing temperature of 1500K, and is also closely related to the behavior of carbon atoms on SiC surface. By analyzing the results, we found that the diffusion energy barrier is the key parameter of graphene growth on SiC surface.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.720-723
• /
• 1996

The behavior of electrodeposition of amorphous nickel-phosphorus has been studied from the point of deposition mechanism, kinetic parameters, morphology and formation of alloy films. The electorode reaction and electrode kinetics of deposition of nickel were significantly influenced by the content of phosphorus. The cathodic deposition of nickel-phosphorus alloy might be governed by the diffusion process of phosphorous acid. The direction of growth layer of the nickel-phosphorus alloy was different with substrate material. The formation of nickel-phosphorus alloy films was affected considerably by the solution compositions, electrolytic conditions and properties of the material as an underlayer.

• 한국진공학회지
• /
• 제1권1호
• /
• pp.153-161
• /
• 1992

A plasma has been used in a high vaccum, cold wall reactor for low temperature deposition of C54 TiSi2 and for in-situ surface cleaning prior to silicide deposition. SiH4 and TiCl4 were used as the silicon and titanium sources, respectively. The deposited films had low resistivities in the range of 15~25 uohm-cm. The investigation of the experimental variables' effects on the growth of silicide and its concomitant silicon consumption revealed that and were the dominant species for silicide formation and the primary factors in silicon consumption were gas composition ratio and temperature. Increasing silane flow rate from 6 to 9 sccm decreased silicon consumption from 1500 A/min to less than 30 A/min. Furthermore, decreasing the temperature from 650 to $590^{\circ}C$ achieved blanket silicide deposition with no silicon consumption. A kinetic model of silicon consumption is proposed to understand the fundamental mechanism responsible for the dependence of silicon consumption on SiH4 flow rate.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.74-77
• /
• 2004

Porous membranes were prepared via thermally induced phase separation (TIPS) of (ethylene-co-vinyl alcohol) (EVOH)/glycerol mixtures. The liquid-liquid (L-L) phase boundaries are shifted to higher temperature when the ethylene contents in EVOH increase. Moreover, the kinetic study proved that the growth of droplets formed by the general liquid-liquid (L-L) phase separation obeyed a power-law scaling relationship in the later stage of spinodal decomposition (SD). A new phase separation mechanism was presented, in which the L-L phase separation could be resulted from the crystallization. The hollow fiber membranes were prepared. The membranes showed asymmetric structures with skin layer near the outer surface, the larger pores just below the skin layer and the smaller pores near the inner surface. The effect of ethylene content (EC) in EVOH, cooling water bath temperature and take-up speed on membrane performance was investigated.

• 공업화학
• /
• 제19권3호
• /
• pp.277-286
• /
• 2008

본 논문은 미생물 성장 공정에서의 기질 저해에 관한 modified Haldane 모델의 이론적 유도를 다룬다. 생물학적 개념인 기질-수용체 복합체의 작동 메커니즘을 바탕으로 새로운 미생물학적 동특성인 N-중첩된 다중 기질 저해 모델의 유도와 더불어 일반화가 이론적으로 고찰되었는데, 이것은 효소 반응에서의 단순 기질 저해 메커니즘이 자연스럽게 확장된 것이다. 결과적으로, 본 기질 저해에 관한 modified Haldane 모델은 완전저해 기질농도라는 생물학적 상수를 포함하고 있는, 잘 설계된 4-파라메터 동특성 모델임이 밝혀졌다.

• Journal of Microbiology and Biotechnology
• /
• 제9권3호
• /
• pp.323-327
• /
• 1999

It was shown that brain-derived neurotrophic factors (BDNFs) secreted from human neuroblastoma cells can significantly improve the growth of the neurites of PC12 nerve cells. The addition of purified BDNFs elongated the neurites of PC 12 nerve cells two to three times more than the case where the addition was not made. The perfusion rate strongly affected the change of the size of human neuroblastoma cells because the cell size decreased as the perfusion rate increased. This could also influence the productivity of BDNF from the cells. It is also important to note that the BDNF production was decreased when the cell size was reduced. BDNF production rate also decreased at a fast perfusion rate in a smaller cell size. At the relatively fast perfusion rate of 18 ml/h, the ratio of apoptotic to necrotic cells dramatically decreased, which possibly caused the decrease of BDNF production. It has been proven that the secretion of BDNF from human neuroblastoma cells was a partially growth-related process by yielding 6.2$\times l0^{-8}/g$ of BDNF/cell/h of growth related parameter and $0.48{\times}l0^{-9}/g$ of BDNF/cell/h of nongrowth-related parameter in a growth kinetic model. In addition, it was also found that the perfusion rate played a very important role in controlling the cell death mechanism.

• 환경위생공학
• /
• 제22권4호
• /
• pp.11-21
• /
• 2007

The recent investigation indicates that the kinetic constants for anionic ions were merely the result of ion exchange between the algae cell wall surface and the anionic ion. In this study, Zygnema sterile and Lepocinclism textra, floating flagellate alga as the dominant algae strains, were cultivated using HRABR(High Rate Algae Biomass Reactor) and the cultivation conditions were 24 hrs. and 12 hrs. irradiation and it was studied how this algal biomass acts on the biosorption mechanism of anionic N and P. Results are as follows : 1. Calculating the specific chl.-a growth rate using Michaelis-Menten model, the one of 24hrs. irradiation was about 55 times higher than the one of 12 hrs. irradiation 2. Calculating the specific chl.-a growth rate using Kuo model, the one of 24 hrs. irradiation was about 2.26 times higher than the one of 12 hrs. irradiation 3. Langmuir model can apply to the biosorption mechanism of anionic N and P in HRABP. 4. Regarding the chlorophyll-a concentration as unit weight of sorbent, the ion selectivity coefficients for N and P are as follows : $(NH_3-N)+(NO_3-N)$ in 24 hrs. irradiation ; 44.984 $PO_4-P$ in 24 hrs. irradiation ; 24.237 $(NH_3-N)+(NO_3-N)$ in 12 hrs. irradiation ; 1432.851 $PO_4-P$ in 12 hrs. irradiation ; 599.076

• 대한지하수환경학회지
• /
• 제2권1호
• /
• pp.22-29
• /
• 1995

유동 세균 입자는 지체계수를 감소시키므로써 지하수에서 소수성 오염물의 이동을 촉진시킨다. 그 크기와 표면의 적당한 물리화학적 조건으로 인하여 세균은 효율적인 오염물의 운반자가 될 수 있다. 이러한 운반자가 있을 때, 그 계는 액상, 입상, 그리고 고상의 3 상으로 해석되어야한다. 오염물은 각 상에 모두, 혹은 그 중의 일부에 존재할 수 도 있다. 본 연구에서는 세균이 있는 경우, 생화학적으로 분해 가능한 유기성 오염물의 다공매질에서의 거동을 물질수지에 기초하여 수학적 모델로 묘사한다. 세균의 액상과 고상사이의 물질 전이 및 오염물의 액상과 입상사이의 물질 전이는 동역학적 관계식으로 나타냈다. 모델 결과를 일반화하기 위하여 무차원화를 수행했고, 그 해를 구하여 세균에 의한 오염물의 가속이송 효과를 알 수 있었다. 모델 결과는 문헌상의 실험결과와 비교되었다. 모델 결과로부터 오염물은 그 계의 Damkohler I 수가 10 이상일 경우 국지 평형 가정을 할 수 있었으며, 세균의 성장율과 주입 농도 등이 오염물의 청소에 아주 중요한 요소임을 알 수 있었다.

• 한국물환경학회지
• /
• 제20권3호
• /
• pp.197-205
• /
• 2004

Batch test methods have developed for a long time to measure kinetic and stoichiometric parameters which are required to perform steady state design and mathematical modelling of activated sludge processes. However, at various So/Xo ratios, abnormal behaviors of ordinary heterotrophic organism in batch tests have been reported in many researches. Thus, in this research, abnormal behaviors of heterotrophs in batch tests were investigated at various So/Xo conditions by measuring and interpreting oxygen utilization rate. As So/Xo ratio increased, the calculated values of maximum specific growth rates, ${\mu}_{H,max}$ and $K_{MP,max}$, increased. However, at a certain point of So/Xo (around 10mgCOD/mgMLAVSS), ${\mu}_{H,max}$ and $K_{MP,max}$ values started to decrease. According to this observation, three prominent behaviours of heterotrophs were identified at various So/Xo conditions. (1) At low So/Xo region (below 5 mgCOD/mgMLAVSS), the oxygen utilization rate of heterotrophs in batch tests were almost stable and consequently yielded lower maximum specific growth rate. (2) At high So/Xo region (up to 5~10 mgCOD/mgMLAVSS), oxygen utilization rate incresed sharply with time and indicated more upward curvature than the predicted OUR with conventional activated sludge model, which consists of single hetetrotrophs group. Thus, in this region, competition model of two organisms, fast-grower and slow-grower, seemed to be appropriate. (3) At extremely high So/Xo region (over 10mgCOD/mgMLAVSS), significant oxygen utilization rate was still observed even after depletion of readily biodegradable COD. This might be caused by retarded utilization of intermediates which were generated by self inhibition mechanism in the process of RBCOD uptake.

• 한국식품과학회지
• /
• 제9권2호
• /
• pp.138-143
• /
• 1977

메밀 전분의 이화학적 성질을 살펴본바, 입자의 크기는 4.3-11.4 미크론(평균 7.8미크론)이었다. 전분의 물결합능력은 103.7%, 아밀로스 함량은 25%이었다. 복굴절성 소실의 측정법에 의한 호화개시 및 호화 종료 온도는 각각 $61^{\circ}$ 및 $65^{\circ}C$이었고 아밀로그라프에 의한 초기 호화온도는$64.5^{\circ}C$이었다. 전분의 노화속도는 $21^{\circ}C$에서 밀 전분보다 다소 빨랐다.