It rains heavily, such as long rain and typhoons, during a typical rainy season in Korea. In this season, several fuel contamination accidents by water and vehicular problems caused by water contaminated fuel occur. Many research groups have studied the effects of water contaminated fuel on vehicles and environment. However the characteristics of water contaminated fuel have not been studied. In this study, we prepared diesel samples with a constant ratio of water (0~30 volume %) using an emulsifier. Then, we analyzed these diesel samples for their representative fuel properties. In the analytical results, diesel with 30% water showed an increase in fuel properties such as density (823→883 kg/㎥), kinematic viscosity (2.601→6.345 ㎟/s), flash point (47→56℃), pour point (-22→2℃), CFPP (cold filter plugging point) (-17→20℃) and copper corrosion number (1a→2a). The low temperature characteristics, such as low pour point and CFPP, blocks the fuel filter in the cold season. In addition, water contaminated diesel decreases lubricity (190→410 ㎛) under high frequency reciprocating rig (HFRR) and derived cetane number (54.81→34.25). The low lubricity of fuel causes vehicle problem such as pump and injector damage owing to severe friction. In addition, the low cetane diesel fuel increases exhaust gases such as NOx and particulate matters (PM) owing to incomplete combustion. This study can be used to identify the problems caused by water contamination to vehicle and fuel facilities.
The asphalt pavement industry has introduced the warm-mix asphalt (WMA) as a mean of energy saving and environmentally safe technology, because the WMA mixture can be mixed and compacted at 30℃ lower than conventional hot-mix asphalt (HMA) at 160℃ or higher. The implementation of WMA can be a good option for paving operations for rural road in remote place, not only due to energy saving and environmental issues, but also lower working temperature. Using WMA technology, the cooled-down asphalt mixture can be still compacted to meet the quality requirement in narrow winding rural road in remote places. Therefore, this study is designed to evaluate engineering properties of WMA binders and concretes, which were prepared for rural road pavement. The objective of the study was to evaluate and suggest proper fundamental properties level of the WMA concrete for rural road pavement. The kinematic viscosity test result indicated that the WMA binders used in this study were effective for compaction at lower temperature, i.e., at 115℃, compared to the HMA binder. According to strength property analyses, it was found that the WMA concrete was acceptable for rural road pavement even though it was compacted at 30℃ lower level. Since the deformation strength (SD) of 3.2 MPa was found to satisfy rutting and cracking resistance minimum guidelines, this value was suggested as a minimum SD value for rural road pavement, considering lack of maintenance program for rural area.
엔진오일은 다양한 내연기관의 윤활을 위한 가장 기본적인 윤활제이다. 최근 자동차사 및 엔진오일 제조사 등은 엔진오일의 교환주기를 15000~20000 km를 권장하고 있는 반면, 대부분의 정비관련업자 및 운전자들은 엔진오일의 성능진보와는 별개로 관습적으로 매5000 km 마다 엔진오일을 교환권유 또는 인식하고 있다. 빈번한 엔진오일의 교환은 폐엔진오일로 인한 환경오염과 차량 유지비 등의 증가요인으로 대두되고 있다. 따라서 본 연구에서는 신유와 실제 운행조건의 차량을 활용하여 5000 km, 10000 km를 각각 주행한 후 회수된 사용엔진오일의 다양한 물성으로 인화점, 유동점, 동점도, 저온겉보기점도, 전산가, 4구식 내마모시험 및 금속분을 조사 분석하였다. 결과적으로 사용엔진오일은 신유에 비해 전산가, 마모흔, 철과 구리 성분 증가가 다소 관찰되었지만, 주행거리별 사용엔진오일의 물성 및 금속분 변화는 거의 유사하였다.
수자원에서 특히 중요한 홍수기에 대한 유량 측정은 어려움이 있고 모든 하천에 대한 지속적인 유량측정은 현재 시스템상에서는 불가능하다. 그래서 유량의 생산을 위해서 그동안 수위유량 관계 곡선이 사용되어 왔다. 하지만 수위-유량 관계 곡선은 그 편리성에도 불구하고 수위와 유량만의 관계를 사용하므로 정확성 면에서 항상 문제가 있어왔다. 따라서 본 연구에서는 Chiu의 엔트로피 개념의 2차원 유속공식을 사용하여 새로운 평균유속공식을 유도하였다. 본 공식은 수심, 중력가속도, 동수경사, 에너지경사, 동점성 계수 등 하천의 수리적 특성을 잘 반영하고 최대유속도 산정할 수 있다. 또한 최대유속과 평균유속사이의 선형관계를 검증할 수 있었고 그 결과로써 하천단면의 특성을 잘 나타내는 평형상태의 ${\phi}(M)$을 산정하였다. 평형상태의 ${\phi}(M)$을 사용하여 평균유속을 산정하였고 이를 바탕으로 유량을 산정하였다. 본 공식의 검증을 위해서 고리형 특성을 보이는 부정류 상황에서의 실험실 측정 데이터를 사용하여 계산된 유량과 실측된 유량을 비교하였고 그 결과는 매우 잘 일치함을 알 수 있었다. 향후 다양한 실험실 데이터 및 하천 데이터를 이용하여 연구가 지속되어 진다면 수자원 분야에 널리 이용될 것으로 판단된다.
Enhancing the value of fine chemicals based on biomass resources is an important objective for addressing environmental and other concerns such as demand for renewable or green products, as well as from the political perspective to reduce dependence on fossil feedstock associated with the use of petroleum-based products. Based on these considerations, we studied the synthesis of estolide using waste plant-based oil materials and their application as lubricants and pour point depressants. Five estolides were prepared by varying molar ratio of palmitic acid (PA) to oleic acid (OA) using a reaction time of 48 h. The estolides were characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR). The isolated yields were in the range of 57-78 % and purity was 93-97%, showing iodine values of 18.2-37.8, total acid numbers (TANs) of 75.6-94.2 mg KOH/g and estolide numbers (ENs) of 1.2-1.8. Increasing the ratio of OA to PA in the synthesis decreased the kinematic viscosity and clouding point of the estolides. Four ball wear test of the estolides as a base oil demonstrated that the wear scar diameter (WSD) of the estolides was significantly lower (0.320-0.495 mm) than the WSD of general base oils such as 150N and Yubase (0.735 and 0.810 mm, respectively), indicating better wear resistance of the estolides. However, the lubricant property was found to be independent of the amount of OA in the estolides. These new materials are prospective candidates for application as a lubricant base oil.
바이오디젤은 지방산 중의 일부물질이 대기중의 산소와 결합하여 유기지방산 등을 형성하며 밀도, 동점도, 전산가, 산화안정도 등의 물성 특성에 영향을 준다. 바이오디젤의 산화안정성 문제를 해결하기 위해 바이오디젤에 다양한 산화방지제를 첨가하여 물성 변화의 특성을 분석하였다. 첨가제의 함량이 증가함에 따라 산화안정도는 증가하는 경향을 나타내고 대부분 첨가량에 비례적으로 증가하였다. 7종의 첨가제 중 TBHQ가 가장 우수한 성능을 보이며 propyl gallate, butyl-amine, aniline, pyrogallol 등 4종의 첨가제도 목표치인 500 ppm 첨가 시 10시간 이상의 성능을 보였다. pyrogallol이 전산가에서 품질기준에 부적합하여 첨가제로서 적절하지 않은 것으로 나타났으며, hydroquinone계열의 TBHA, DTBHQ는 산화안정도에서 품질기준은 만족하나 연구과제의 목표치인 10 시간 이상에 미치지 못하는 결과를 보여 개발 첨가제로서는 결함이 있는 것으로 판단하였다. 또한 propyl gallate도 전산가에서 품질기준에 적합하나 500 ppm 첨가 시 수치가 높고 첨가제 증가에 따른 전산가 증가 경향이 커서 첨가제로서 부적합한 것으로 판단하였다.
국내 자동차용 경유에 혼합하여 유통 중인 바이오디젤은 물리적인 관점에서 기존 석유계 경유와 동점도, 밀도 등의 물성값이 유사하고 세탄가가 높은 장점이 있다. 또한 환경적인 측면에서는 기존의 석유유통 인프라 개조 및 변경없이 사용가능하다는 점과 함산소 연료로서 디젤기관에서의 연소성이 좋고 유해 배출가스 저감효과가 있으며 생분해성도 높아 환경오염이 적어 자동차용 경유 대체연료로 각광받고 있다. 그러나, 기존 식용계 작물을 원료로 하고 있다는 점에서 단점으로 지적되는 바이오디젤 대신 단위면적당 $CO_2$ 흡수율이 높고 빠른 성장 속도가 장점으로 거론되는 미세조류의 활용에 대한 연구가 대두되고 있다. 본 연구에서는 미세조류 중 Dunaliella tertiolecta 종을 이용하여 생산한 바이오디젤의 전환율을 연구하기위해 기존에 사용되고 있는 GC-FID분석방법의 문제점에 대해 조사하고 TOF-MS 장비를 통한 개별 지방산 메틸에스테르의 성분을 검토하였다.
자동변속기유는 자동차의 자동변속기의 성능을 유지시키기 위해 사용되는 유체이다. 최근 자동차 제조사에서는 일반적으로 자동변속기유를 80000~100000 km 주행후 교환 또는 무교환을 보증하고 있지만 국내에서는 많은 운전자들이 50000 km 이하에서도 자동변속기유를 교환하고 있는 것으로 조사되었다. 빈번한 자동변속기유의 교환은 환경오염과 차량유지비용을 상승시키는 원인으로 작용되고 있다. 본 연구에서는 사용하지 않은 신유와 50000 km와 100000 km를 각각 주행한 뒤 회수된 자동변속기유를 대상으로 인화점, 연소점, 유동점, 동점도, 저온겉보기점도, 전산가, 금속분과 같은 물리적 특성을 분석하였다. 연구결과, 신유에 비해 사용유는 전산가, 유동점, 금속분이 증가되는 것을 확인하였지만, 두 종류의 사용유(50000 km, 100000 km)의 물리적 특성과 금속분 함량의 차이는 크지 않음을 알수 있었다.
Lunghi, Gianmarco;Pasqualetto, Elena;Rocchio, Benedetto;Mariotti, Alessandro;Salvetti, Maria Vittoria
Wind and Structures
/
제34권1호
/
pp.115-125
/
2022
The high-Reynolds number flow around a rectangular cylinder, having streamwise to crossflow length ratio equal to 5 is analyzed in the present paper. The flow is characterized by shear-layer separation from the upstream edges. Vortical structures of different size form from the roll-up of these shear layers, move downstream and interact with the classical vortex shedding further downstream in the wake. The corresponding mean flow is characterized by a recirculation region along the lateral surface of the cylinder, ending by mean flow reattachment close to the trailing edge. The mean flow features on the cylinder side have been shown to be highly sensitive to set-up parameters both in numerical simulations and in experiments. The results of 21 Large Eddy Simulations (LES) are analyzed herein to highlight the impact of the lateral mean recirculation characteristics on the near-wake flow features and on some bulk quantities. The considered simulations have been carried out at Reynolds number Re=DU_∞/ν=40 000, being D the crossflow dimension, U_∞ the freestream velocity and ν the kinematic viscosity of air; the flow is set to have zero angle of attack. Some simulations are carried out with sharp edges (Mariotti et al. 2017), others with different values of the rounding of the upstream edges (Rocchio et al. 2020) and an additional LES is carried out to match the value of the roundness of the upstream edges in the experiments in Pasqualetto et al. (2022). The dimensions of the mean recirculation zone vary considerably in these simulations, allowing us to single out meaningful trends. The streamwise length of the lateral mean recirculation and the streamwise distance from the upstream edge of its center are the parameters controlling the considered quantities. The wake width increases linearly with these parameters, while the vortex-shedding non-dimensional frequency shows a linear decrease. The drag coefficient also linearly decreases with increasing the recirculation length and this is due to a reduction of the suctions on the base. However, the overall variation of C_D is small. Finally, a significant, and once again linear, increase of the fluctuations of the lift coefficient is found for increasing the mean recirculation streamwise length.
해외 열대작물 씨앗에서 추출한 식물성 오일을 이용하여 바이오디젤을 생산하고 물성분석을 통해 차량연료로서의 사용가능성을 검토하는 연구를 수행하였다. 유리지방산 함량이 높은 열대작물 오일의 효율적인 바이오디젤 생산을 위해서는 유리지방산을 산촉매로 에스테르화한 후 전이에스테르화 반응하는 2단계 반응공정의 적용이 필요하였다. 전처리(에스테르화) 반응에 적합한 촉매를 선정하기 위해 3가지 산 촉매의 비교실험 수행 결과 황산이 최적 촉매임을 확인하였고, 반응표면분석법(response surface method, RSM)에 의해 도출한 최적 반응조건은 황산 촉매 0.982%와 메탄올 26.7%로 나타났다. 전이에스테르화 반응에 대한 최적화 실험을 반응표면분석법에 근거하여 수행하고, 결과로 KOH 촉매 1.24%, 메탄올 22.76%로 확인되었지만 본 연구팀의 선행 실험의 반응조건(KOH 0.8%)보다 과량의 촉매가 투입된 것으로 나타났다. 이에 대한 확인실험으로 메탄올과 촉매 투입량에 대한 추가 실험을 수행하였으며, 그 결과로서 최적 반응조건으로 KOH 촉매 0.8%와 메탄올:오일 몰비 6.2:1로 도출하였으며 반응생성물의 분석결과 지방산 메틸에스테르(fatty acid methyl ester, FAME) 100.8%, 산가 0.45 mgKOH/g, 수분 0.00%, 산화안정성 0.70 h, 총 글리세롤 함량 0.04%, Mono-glyceride 함량 0.04%, Di-glyceride 함량 0.01%, Tri-glyceride 함량 0.00%, 동점도($40^{\circ}C$에서) $4.041mm^2/s$, 저온필터막힘점 $1.0^{\circ}C$로 주요 바이오디젤 품질규격을 만족하는 것으로 나타났다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.