• Journal of Navigation and Port Research
• /
• v.47 no.4
• /
• pp.256-270
• /
• 2023

In this study, a sliding mode (SM) controller for dynamic positioning (DP) was specifically designed for a turret connection operation of a ship or an offshore structure in which an arbitrary point on the structure could be controlled as the motion center instead of the center of mass. The SM controller allows control of the arbitrary point and provides capability to manage uncertainties in the dynamics of ships and offshore structures, external forces caused by unknown changing marine environments, and transient performance of DP systems. The Jacobian matrix included in kinematic equations of the controlled object was modified to design the SM controller to control based on an arbitrary point of ships or offshore structures. To ensure robustness of the controller, the Lyapunov stability theory was applied in the design of the SM controller. In general, for robustness in DP control, gain scheduling based on a proportional-derivative (PD) control algorithm is employed. However, finding appropriate gains for gain scheduling complicates the application of DP systems. Therefore, in this study, the SM control algorithm was considered to mitigate the complexity of the DP controller for ships and offshore structures. To validate the proposed SM control algorithm, time-domain simulations were conducted and utilized to evaluate the performance of the control algorithm. The effectiveness of the proposed SM controller was assessed by comparing simulation results with results of a conventional PD control algorithm applied in DP control.

• Physical Therapy Korea
• /
• v.22 no.2
• /
• pp.21-29
• /
• 2015

This study investigated the effect of a load of 15% body weight on trunk, pelvis and hip joint coordination and angle variability in subjects with and without chronic low back pain (CLBP) during an anterior load carriage task. Thirty volunteers participated in the study (15 without CLBP, 15 with CLBP). All participants were asked to perform an anterior carriage task with a load of 15% body weight. The outcome measures included the means and standard deviations for measurements of three-dimensional coordination and angle variability of the trunk, pelvis and hip joint. As CLBP patient group .06, control group .70, the correlation coefficient between the groups showed a significant difference only in trunk-pelvic in the sagittal plane (p<.05). Angle variability of CLBP patient group increased significantly in the trunk in frontal plane, the pelvis in all sagittal plane, frontal plane, transverse plane, and the hip in sagittal plane, the hip in frontal plane than angle variability of control group (p<.05). This results mean that the CLBP patient group showed a disconnected coordination pattern in the trunk-pelvis in the sagittal plane, an increased pelvic angle variability in all three planes, and hip angle variability in the sagittal, and frontal planes. The CLBP patient group may have developed a compensatory movement of the pelvis and hip joint arising from the changed stability due to the abnormal coordination patterns of the trunk-pelvic in the sagittal plane. Therefore, CLBP symptoms can potentially worsen in the pelvis and adjacent hip joint in CLBP patients who perform weight-related behaviors in their daily lives. Further research is needed to determine the three-dimensional characteristics of the electromyography and neuromuscular aspects of subjects with CLBP.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.4
• /
• pp.285-294
• /
• 2013

The purpose of this study was to provide fundamental information for success factors of techniques through kinematic analysis including coordination of lower extremities and landing stability according to the success and failure of $540^{\circ}$ Dwihuryeochagi in Taekwondo. Twenty Taekwondo athletes: ten success group (S, age: $22.3{\pm}1.8$ yrs, height: $172.1{\pm}5.4$ cm, body mass: $64.4{\pm}4.2$ kg) and ten failure group (F, age: $22.3{\pm}1.8$ yrs, height: $172.1{\pm}5.4$ cm, body mass: $64.4{\pm}4.2$ kg) participated in this study. Three-dimensional motion analysis using a system of 3 video cameras with a sampling of 60 fields/s was performed during the competition of $540^{\circ}$ Dwihuryeochagi. Motions were divided into five events: pivot foot landing (E1), pivot foot toe off (E2), COM max height (E3), kick impact (E4) and landing (E5). At E1, the stride width was greater for S than for F (p<.05) while the time was greater for S than for F during P4 (p<.05). At E4, knee angle was greater for S than for F (p<.05). At E5, hip angle was greater for S than for F (p<.05) while kick distance was greater for S than for F (p<.05). Furthermore, at P3, the time would be related to kicking velocity (p<.05), while at P4, the time, range of hip angle and knee angle would be related to kick distance (p<.05). At P1, COM horizontal velocity would be related to COM vertical velocity of P1 and P2 (p<.05). Based on the findings, success factors of $540^{\circ}\acute{y}$ Dwihuryeochagi were COM horizontal velocity of P1, COM vertical velocity of P2, the time, kick distance, velocity, angle of lower extremities and coordination of P3-P4.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.31-41
• /
• 2006

The primary purpose of a TKA is to restore normal knee function Therefore, ideally, a TKA should: (a) maintain the natural leverage of the knee joint muscles to ensure generating adequate knee muscle moments to accomplish daily tasks such as rising from climbing stairs; (b) provide adequate knee joint stability. A 16-channel MyoResearch XP EMG system was used to collect the differential input surface electromyography signals VM, VL, RF, BF, ST during climbing/descending stair tests. A Peak Motion Measurement System was used to collect the kinematic and kinetic data. AKIN-COM Ill isokinetic dynamometer was used for EMG of VM, VL, RF, BF and ST during maximal voluntary contraction. I Quadriceps EMG results for the VM of the passed 1year group limb demonstrated significant less RMS EMG than that of the passed 3year group limb $60^{\circ}-15^{\circ}$ of knee flexion(p<0.05). The VL of the passed 1year group limb also demonstrated significants less RMS EMG than that of the passed 3year group limb from $60^{\circ}-45^{\circ}$ of knee flexion(p<0.05). Similar to the VM and VL, the RF of the passed 1year group limb showed less RMS EMG than that of the passed 3year group limb from $60^{\circ}-30^{\circ}$ do knee flexion(p<0.05). Hamstring EMG results for the BF of the passed 1year group limb demonstrated less RMS EMG than that of the passed 3year group limb from $75^{\circ}-15^{\circ}$ of knee flexion(p<0.05). The passed 1year group limb tended to have less ADD displacement(p<0.071) than that of the passed 3year group limb. There was no significant difference of the ABD displacement between the passed 1year group and the passed 3year group limbs(p<0.73). The passed 3year group used compensatory adaptation movement strategies to compensate for the strength deficit of passed 3year group limbs. The passed 3year group limb also increased the quadriceps muscle activation level to produce more knee extension moment to compensate for the short quadriceps moment arm. The passe 3year group limb might have an unstable knee joint in the medio-Iateral direction during the climbing/descending by showing a tendency of more ADD displacement and greater hamming co-activation EMG than the passed 1year group limbs. The TKA design was not able to help the knee joint to produce adequate knee extension moment with less quadriceps muscle effort. I think that old man needs continuous exercise for muscle strength.

• The Journal of Engineering Geology
• /
• v.25 no.4
• /
• pp.485-498
• /
• 2015

Structural analysis for a large-scale fault in Maegok-dong, Ulsan, was carried out based on filed-works to investigate the geometric and kinematic characteristics of the fault as well as its Quaternary slip. As results, a series of repeated stratigraphy, minor faults, fracture zones, and deformation band clusters are observed over a distance of about 100 m in the first studied site consisting of sedimentary rocks, which may indicate the damage zone of a large-scale fault in this site. In the second site, mainly composed of granitic clastic rocks, a large-scale thrust fault is expected based on low-angle dipping faults showing branched and/or merged patterns. Age of the last slip on this fault was restrained as after 33,275 ± 355 yr BP based on radiocarbon dating for organic material included in the gouge zone. Dimension of fault damage zone, dominant sense of slip, and age of the slip event associated with the fault suggest that these structures have a close relationship with the Ulsan Fault and/or Yeonil Tectonic Line, which are well-known large-scale neotectonic structural features around the study area. Therefore, it is necessary to study the characteristics of the faults in detail based on structural geology and paleoseismology in order to ensure seismic and geologic stability of the buildings under construction, and to prevent geologic hazards in this area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.457-467
• /
• 2018

Currently, the regulation and rules for public surveying and the UCPs (Unified Control Points) adapts those of the triangulated traverse surveying. In addition, such regulations do not take account of the unique characteristics of GNSS (Global Navigation Satellite System) surveying, thus there are difficulties in field work and data processing afterwards. A detailed procesure of GNSS processing has not yet been described either, and the verification of accuracy does not follow the generic standards. In order to propose an appropriate procedure for field surveys, we processed a short session (30 minutes) based on the scenarios similar to actual situations. The reference network in Seoul was used to process the same data span for 3 days. The temporal variation during the day was evaluated as well. We analyzed the accuracy of the estimated coordinates depending on the parameterization of tropospheric delay, which was compared with the 24-hr static processing results. Estimating the tropospheric delay is advantageous for the accuracy and stability of the coordinates, resulting in about 5 mm and 10 mm of RMSE (Root Mean Squared Error) for horizontal and vertical components, respectively. Based on the test results, we propose a procedure to estimate the daily solution and then combine them to estimate the final solution by applying the minimum constraints (no-net-translation condition). It is necessary to develop a web-based processing system using a high-end softwares. Additionally, it is also required to standardize the ID of the public control points and the UCPs for the automatic GNSS processing.

• 한국체육학회지인문사회과학편
• /
• v.58 no.6
• /
• pp.449-459
• /
• 2019

The purpose of this study is to identify how postural mechanics affects postural control on balance and stability by using frequency analysis technique from the kinematic data acquired during the one leg standing posture. For this purpose, the experimental group consisted of two groups, the normal group (n=6) and the national Gymnastics group (n=6). Displacement data of CoP were analyzed by frequency analysis of rambling (RM) and trembling (TR) by FFT signal processing. As a results, there was a significant difference in evaluating the stabilization index between the two groups with the eyes open and closed one leg stnading (p <.05). The cause of the difference was found to be the output of the maximum amplitude of RM (f1) and TR (f2) (p <.05). In particular, in the low frequency RM of 8-9 Hz, which is a natural frequency of signal wave involved in postural feedback feedback, the main frequency appeared to be performs the exercise mechanism of stable brain posture control. And in the high frequency TM of 120-135 Hz, it is considered that the adaptation of the reflective muscle response is minimized to minimize posture shaking. In conclusion, this study provides evidence for the intrinsic main frequencies according to the postural control ability which affects the CNS in one leg standing.

• Clinics in Shoulder and Elbow
• /
• v.14 no.1
• /
• pp.13-19
• /
• 2011

Purpose: Not much is known about the obvious relationship between posteroinferior rotator cuff tear and biceps lesion. The purpose of this study is to analyze the effect of posteroinferior rotator cuff tear on a biceps lesions by comparing the rotator cuff tear and biceps lesions with the number of cuff tears and the degree of degeneration of the rotator cuff. Materials and Methods: 65 patients who underwent surgery for a posteroinferior rotator cuff tear from 2002 to 2009 were included as subjects. The study determined the factors (the number of cuff tears and the degree of degeneration as assessed by MRI) that affected biceps lesions and the kinematic stability of the rotator cuff. Results: Biceps lesion was noted 11 patients among the 51 patients with supraspinatus tendon tears and in 8 patients among the 14 patients with supraspinatus, infraspinatus or teres minor tendon tears, and there was a statistically significant difference between those two groups (p=0.0095). The number of cuff tears was proportional to biceps lesion with statistical significance (p=0.0095). Among the biceps lesions, SLAP II lesion showed a statistically different distribution according to the number of cuff tears (p=0.0073). The degeneration factors (Goutallier's classification and the tangent sign) had no correlations with biceps lesion. Conclusion: Posterosuperior cuff tear may affect biceps lesion. Especially, the number of cuff tears has a close relationship, but the degenerative indicators have no relationship with biceps lesion.