• 대한안전경영과학회지
• /
• 제17권3호
• /
• pp.163-171
• /
• 2015

The aim of this study was to investigate kinematic mechanism of gait different road conditions(dry vs. oil) in order women. For this study, twenty older women and ten young women participated in this research. twelve infrared cameras were used to collect data. It appeared that the gait strategies of older women were slower velocity and higher CoM than young women. Depending on road conditions, gait velocities of dominant muscle older women on dry surface were faster than dominant sense older women, but those of them were inverse on oil surface. The slip displacement of dominant muscle older women was less than young women, but the slip displacement of dominant sense older women was greater than young women. In case of blind during stance phase on oil surface, the rotational motion of the ankle and knee joints were increased. In conclusion, older women were subjected to self-organization theory and phase shift in dynamic theory.

• 한국운동역학회지
• /
• 제33권4호
• /
• pp.137-146
• /
• 2023

Objective: The horizontal bar of gymnastics is fundamentally based on rotational movements. This study aimed to determine the effect of kinematics variables and sequence during horizontal bar performance (Kovacs, Tkatchev Stretched & Kolman) in gymnastic. Method: Four gymnastics athletes of the national team were participated in this study. All subjects were asked to perform the three types of horizontal bar skill. Simi marker-less cameras were used to collect the raw data (120 Hz). Kinematic variables (total time, interval, center of mass, height, angular velocity etc.) and sequence variables were calculated to examine the differences. Results: As a result, horizontal bar performance in gymnastic has special sequence that making the peak angular velocity from distal joint to proximal joint (knee-hip-shoulder). It is rare sequence that typical sport does not have. Conclusion: In field, gymnastic coaches and players should know the result that there is special sequence in horizontal bar performance. It could be very useful to teach and enhance their performance.

• 한국운동역학회지
• /
• 제26권2호
• /
• pp.205-211
• /
• 2016

Purpose: The aim of this study was to analyze biomechanical factors and PMT (premotor time) of body muscles between elite college and amateur baseball players during the baseball batting motion. Method: Kinematic and electromyographic data were obtained for 10 elite college baseball players and 10 amateur baseball players who participated in this study. All motion capture data were collected at 200 Hz using 8 VICON cameras and the PMT of muscles was recorded using a Delsys Trigno wireless system. The peak mean bat speed and the peak mean angular velocities of trunk, pelvis, and bat with PMT of 16 body muscles were computed. These kinematic and PMT data of both groups were compared by independent t-tests (p < .05). Results: The pelvis, trunk, and bat showed a sequence of angular velocity value during baseball batting. The PMTs of right tibialis anterior, left gastrocnemius, external oblique, and erector spinae were significantly different between the two groups. Conclusion: The PMT of body muscles was related to the shifting of body and rotation of the pelvis and the trunk segment, and this action can be considered the coordinated muscle activity of the lower and upper body.

• 한국측량학회지
• /
• 제16권2호
• /
• pp.271-279
• /
• 1998

본 논문은 토목 공사 현장에서의 효율적인 다짐관리를 위하여 RTK GPS측량에 의한 다짐관리 시스템의 개발에 관한 것이다. 실시간 GPS측량방법은 현장에서 실시간으로 측량사의 위치를 그래픽 화면에 출력하여 정확한 위치를 결정할 수 있는 방법으로 본 연구에서는 로울러상에 실시간 GPS시스템을 장착하고 개발된 소프트웨어 (GPSROLL v.1.0)로써 산출한 다짐횟수나 컴퓨터 화면에 출력된 로울러의 이동궤적을 파악하여 다짐관리의 효율성을 높이고자 하였다. 또한 다짐현장에서 필요한 토질실험 데이터 처리용 프로그램과 측량계산 프로그램을 개발하여 현장관리의 효율화를 제고하였으며, 한글 GUI를 이용하여 사용자가 편리하게 이용 가능토록 데이터 입력화면 및 출력화면을 구현하였다.

• 대한의용생체공학회:의공학회지
• /
• 제32권2호
• /
• pp.105-108
• /
• 2011

The purpose of the present study was to analyze the lower stiffness over the difference between soft and stiff landings during hopping. Five male subjects performed hopping on two legs at 2.5 Hz. During the experiments, 3D motion capture system was used to obtain the kinematic data and two force plates were synchronized to calculate the kinetic data. We determined lower extremity stiffness of the knee and ankle from kinetic and kinematic data. Leg stiffness was approximately 1.2-times significantly higher in stiff landing than in soft landing_ There was no significant difference in knee joint stiffness between soft and stiff landings. Ankle joint stiffness was approximately 1.34-times significantly higher in stiff landing than in soft landing. These results suggest that humans adjust lower extremity stiffness over the comparison of two different landing methods we evaluated.

• 한국측량학회지
• /
• 제26권5호
• /
• pp.493-504
• /
• 2008

SBAS(Space-Based Augmentation System)는 광역보정항법시스템(WADGPS, Wide Area DGPS)으로써 지역 보정항법시스템(LADGPS, Local Area DGPS)의 단점을 보완한 위성항법 보정시스템이다. 이 연구에서는 GPS 측위의 대표적인 방법인 실시간 이동측위(RTK; Real-Time Kinematic), DGPS(Differential GPS) 측위, 단독측위(Standalone)와 SBAS 이동측위를 실시하고 그에 따른 측위 정확도 비교를 통해 SBAS 이동측위의 성능을 분석하였다. 정지측위 결과 산출한 좌표를 참값으로 간주하였고, 각각의 측위방법으로 획득한 관측데이터를 참값과 비교하여 계산한 2차원 평균제곱근(RMS: Root Mean Square)오차와 3차원 RMS 오차를 정확도 비교의 지표로 사용하였다. 그 결과, 각 측위방법에 따른 3차원 RMS 오차는 RTK 측위 13.1cm, DGPS 측위 126.0cm, 이중주파수 단독측위 135.7cm, 단일주파수 단독측위 428.9cm, 그리고 SBAS 측위 109.2cm로 나타났다. 이를 통해 SBAS 측위의 정확도가 DGPS 측위 정확도와 대등한 수준임을 확인할 수 있었다.

• The Journal of Korean Physical Therapy
• /
• 제25권5호
• /
• pp.297-302
• /
• 2013

Purpose: This study was conducted in order to investigate the kinematic gait parameter of lower extremities with different gait conditions (level walking, stair, ramp) in hemiplegic patients. Methods: Ten hemiplegic patients participated in this study and kinematic data were measured using a 3D motion analysis system (LUKOtronic AS202, Lutz-kovacs-Electronics, Innsbruk, Austria). Statistical analysis was performed using one-way repeated measure of ANOVA in order to determine the difference of lower extremity angle at each gait phase with different gait conditions. Results: Affected degree of ankle joint in the heel strike phase showed significant difference between level walking and climbing stairs, and toe off phase showed significant difference between level walking and climbing stairs, ramps, and climbing stairs. Affected degree of knee joint showed no significant difference in all attempts. Affected degree of hip joint in the toe off phase showed significant difference between level walking, ramps and stairs, and climbing ramps. Swing phase showed significant difference between sides for level walking and stairs, climbing ramps. Affected ankle joint of heel strike and toe off, and affected hip joint of toe off and the maximum angle of swing phase in the angle was increased. Unaffected side of the ankle joint, knee joint, and hip joint showed a significant increase in walking phase. Conclusion: These findings indicate that compared with level walking, different results were obtained for joint angle of lower extremity when climbing stairs and ramps. In hemiplegia patient's climbing ramps, stairs, more movement was observed not only for the non-affected side but also the ankle joint of the affected side and hip joint. According to these findings of hemiplegic patients when climbing stairs or ramps, more joint motion was observed not only on the unaffected side but also on the affected side compared with flat walking.

• 한국운동역학회지
• /
• 제30권1호
• /
• pp.17-25
• /
• 2020

Objective: The purpose of this study is to provide a better understanding of long turn mechanism by describing long turns after kinematic analysis and provide skiers and winter sports instructors with data through which they are able to analyze right postures for turns in skiing in a systematic, rational and scientific manner. Method: For this, a mean difference of kinematic variables (the center of gravity (CG) displacement of distance, trajectory, velocity, angle) was verified against a total of 12 skiers (skilled and unskilled, 6 persons each), regarding motions from the up-start to down-end points for long turns. Results: First, concerning the horizontal displacement of CG during a turn in skiing, skilled skiers were positioned on the right side at the upstart and edge-change points at a long turn. There was no difference in anteroposterior and vertical displacements. Second, in terms of CG-trajectory differences, skilled skiers revealed a significant difference during a long turn. Third, regarding skiing velocity, skilled skiers were fast at the edge-change and maximum inclination points in long turns. Fourth, there was no difference in a hip joint in terms of a lower limb joint angle. In a knee joint, a large angle was found at the up-start point among skilled skiers when they made a long turn. Conclusion: In overall, when skilled and unskilled skiers were compared, to make a good turn, it is required to turn according to the radius of turn by reducing weight, concerning the CG displacement. Regarding the CG-trajectory differences, the edge angle should be adjusted via proper inclination angulation. In addition, a skier should be more leaned toward the inside of a turn when they make a long turn. In terms of skiing velocity, it is needed to reduce friction on snow through the edging and pivoting of the radius or turn according to curvature and controlling ski pressure. Regarding a lower limb joint angle, it is important to make an up move by increasing ankle and knee angles instead of keeping the upper body straight during an up motion.

• 제어로봇시스템학회논문지
• /
• 제20권8호
• /
• pp.875-881
• /
• 2014

The redundancy resolution of the seven DOF (Degree of Freedom) upper limb exoskeleton is key to the synchronous motion between a robot and a human user. According to the seven DOF human arm model, positioning and orientating the wrist can be completed by multiple arm configurations that results in the non-unique solution to the inverse kinematics. This paper presents analysis on the kinematic and dynamic aspect of the human arm movement and its effect on the redundancy resolution of the seven DOF human arm model. The redundancy of the arm is expressed mathematically by defining the swivel angle. The final form of swivel angle can be represented as a linear combination of two different swivel angles achieved by optimizing two cost functions based on kinematic and dynamic criteria. The kinematic criterion is to maximize the projection of the longest principal axis of the manipulability ellipsoid of the human arm on the vector connecting the wrist and the virtual target on the head region. The dynamic criterion is to minimize the mechanical work done in the joint space for each of two consecutive points along the task space trajectory. The contribution of each criterion on the redundancy was verified by the post processing of experimental data collected with a motion capture system. Results indicate that the bimodal redundancy resolution approach improved the accuracy of the predicted swivel angle. Statistical testing of the dynamic constraint contribution shows that under moderate speeds and no load, the dynamic component of the human arm is not dominant, and it is enough to resolve the redundancy without dynamic constraint for the realtime application.

• 대한기계학회논문집A
• /
• 제41권10호
• /
• pp.931-940
• /
• 2017

본 논문은 슬라이딩 모드 관측기를 이용한 기구학 모델 기반 자율주행 자동차의 예견 고장진단 알고리즘에 관한 연구이다. 자율주행 자동차는 안전한 주행을 위해 신뢰성이 확보된 주행 환경 정보와 차량의 동적상태 정보가 필요하다. 센서 정보의 신뢰성 판단을 위해 본 연구에서는 종방향 기구학 모델기반 슬라이딩모드 관측기를 이용하여 종방향 환경정보와 차량 가속도 정보를 실시간으로 상호 보완적 고장진단이 가능한 예견 알고리즘을 제안하였다. 적용된 슬라이딩 모드 관측기는 종방향 환경정보의 고장신호에도 강건한 입력신호 재건성능을 보이면서 알고리즘의 신뢰성을 확보할 수 있었다. 예견 고장진단 알고리즘의 합리적 성능평가를 위해 네 가지 조건에 대한 실제 주행 데이터 기반 선행차량 추종시나리오를 적용하였다. 성능평가 결과 본 연구에서 제안된 예견 고장진단 알고리즘은 모든 평가조건과 주행 시나리오에 대해 합리적인 고장진단 성능을 보여주었다.