• 제어로봇시스템학회논문지
• /
• 제6권2호
• /
• pp.190-196
• /
• 2000

A hybrid position/force control scheme to regulate the force and position by dual arms is proposed where two arms are treated as one rm in a kinematic viewpoint. The force error calculated from the information of two force/torque sensors attached to the end of each arm is transferred to minimum configuration space coordinates and then is distributed to total system joint coordinates, The position adjustment at the total con-figuration coordinates is computed based on the effective compliance matrix with respect to total joint coordinates which is obtained by coordinate transformation between the task coordinates and the total joint coordinates. The proposed scheme is applied to sawing task. When the trajectory of the saw is planned to follow a line in a horizontal plane 2 position parameters are to be controlled(i.e., two translational positions) Also a certain level of contact force has to be controlled along the vertical direction(i.e. minus z-direction) not to loose the contact with the object to be sawn. We experimentally show that the performance of the velocity and force response are satisfactory. The proposed hybrid control scheme can be applied to arbitrary two cooperating arm system regardless of their kinematic structure and the number of actuated joints.

• 제어로봇시스템학회논문지
• /
• 제15권8호
• /
• pp.823-830
• /
• 2009

For developing automotive parts and telematics devices the real car test often shows limitation because it needs high cost, much time and has the possibility of the accident. Therefore, a Vehicle Driving Simulator (VDS) instead of the real-car test has been used by some automotive manufactures, research centers, and universities. The VDS is a virtual reality device which makes a human being feel as if one drives a vehicle actually. Unlike actual vehicle, the simulator has limited kinematic workspace and bounded dynamic characteristics. So it is difficult to simulate dynamic motions of a multi-body vehicle model fully. In order to overcome these problems, a washout algorithm which restricts workspace of the simulator within the kinematic limits is needed, and analysis of dynamic characteristics is required also. However, a classical washout algorithm contains several problems such as time delay and generation of wrong motion signal caused by characteristics of filters. Specially, the classical washout algorithm has the simulator sickness when driver hardly turns brakes and accelerates the VDS. In this paper, a new washout algorithm is developed to enhance the motion sensitivity and improve the simulator sickness by using the vehicle tilt signal which is generated in the real time vehicle dynamic model.

• 한국지능시스템학회논문지
• /
• 제22권1호
• /
• pp.22-27
• /
• 2012

본 논문에서는 볼 나사의 구동에 의해 물체의 파지가 가능한 로봇 그리퍼 메커니즘을 제시한 후, 시뮬레이션을 통하여 제시한 그리퍼 메커니즘의 파지 동작에서 나타날 수 있는 기구학적인 특성을 분석한다. 이를 위하여 구동기의 관절 공간과 그리퍼의 끝 공간간의 기구학적 관계를 파악한다. 제안한 로봇 그리퍼는 하나의 구동모터를 사용하고, 좌우 대칭인 폐체인(closed-chain)을 형성하고 있는 것이 특징이다. 결과적으로, 제안한 로봇 그리퍼는 구조적으로 외력에 강인하고, 하나의 구동모터에 의해 파지 동작이 구현되므로 수월한 파지가 가능하다. 또한 제안된 그리퍼는 파워 파지에 유용한 조임 효과를 갖는다.

• 제어로봇시스템학회논문지
• /
• 제16권4호
• /
• pp.319-328
• /
• 2010

This paper proposes a robust adaptive fuzzy tracking control scheme for a nonholonomic mobile robot with external disturbances as well as parameter uncertainties in the robot kinematics, the robot dynamics, and the actuator dynamics. In modeling a mobile robot, the actuator dynamics is integrated with the robot kinematics and dynamics so that the actuator input voltages are the control inputs. The presented controller is designed based on a FBFN (Fuzzy Basis Function Network) to approximate an unknown nonlinear dynamic function with the uncertainties, and a robust adaptive input to overcome the uncertainties. When the controller is designed, the different parameters for two actuator models in the actuator dynamics are taken into account. The proposed control scheme does not require the kinematic and dynamic parameters of the robot and actuators accurately. It can also alleviate the input chattering and overcome the unknown friction force. The stability of the closed-loop control system including the kinematic control system is guaranteed by using the Lyapunov stability theory and the presented adaptive laws. The validity and robustness of the proposed control scheme are shown through a computer simulation.

• 제어로봇시스템학회논문지
• /
• 제13권9호
• /
• pp.896-902
• /
• 2007

This paper proposes a vision-based kinematic control method for mobile robots with camera-on-board. In the previous literature on the control of mobile robots using camera vision information, the forward velocity is set to be a constant, and only the rotational velocity of the robot is controlled. More efficient motion, however, is needed by controlling the forward velocity, depending on the position in the corridor. Thus, both forward and rotational velocities are controlled in the proposed method such that the mobile robots can move faster when the comer of the corridor is far away, and it slows down as it approaches the dead end of the corridor. In this way, the smooth turning motion along the corridor is possible. To this end, visual information using the camera is used to obtain the perspective lines and the distance from the current robot position to the dead end. Then, the vanishing point and the pseudo desired position are obtained, and the forward and rotational velocities are controlled by the LOS(Line Of Sight) guidance law. Both numerical and experimental results are included to demonstrate the validity of the proposed method.

• 한국지능시스템학회논문지
• /
• 제21권5호
• /
• pp.660-666
• /
• 2011

본 논문에서는 절 기구(bar linkage)형 다관절 보행로봇(multi-legged walking robot)의 최적다리 길이선정을 위하여 입자군집 최적화(PSO: Particle Swarm Optimization) 기법을 사용하였다. PSO 알고리즘을 적용하기 위해서 제안한 보행로봇의 기구학적인 해석이 필요하다. 게 로봇은 4절 링크 이론(four-bar linkage)과 얀센 메커니즘(Jansen mechanism)을 기반으로 설계되었다. 이러한 기구학적인 해석을 바탕으로 로봇의 보행보폭을 정의한다. 그리고 PSO의 학습 및 군집 특성을 이용하여 최대의 보행보폭을 가지는 10개(EA)의 링크(link)길이를 구한다. 시뮬레이션을 통해 각 링크의 위치와 다리 끝단의 보행보폭을 확인할 수 있다. 결과로서, PSO기법이 절 기구형 다관절 보행로봇의 최적다리 길이 선정에 효율적임을 보여 준다.

• 제어로봇시스템학회논문지
• /
• 제20권10호
• /
• pp.1063-1066
• /
• 2014

The humanoid robot, DRC-HUBO is developed from the KHR (KAIST Humanoid Robot) series to meet the requirements of the DARPA Robotics Challenge. DARPA Robotics Challenge was a competition to develop semi-autonomous humanoid robot so that dispatched in dangerous environments in place of humans like the Fukushima nuclear accident. In this paper, we introduce DRCH-UBO briefly and a methodology to remove debris blocking an entryway. The methodology includes inverse kinematics for DRC-HUBO and stabilization controller based on ZMP. Proposed inverse kinematics is robust, and pelvis-related tasks improve the manipulability and workspace of the arms. The controller improves the damping characteristic of the system and mitigates the instability during removal of debris. For given position and orientation of the debris, DRC-HUBO generates motion to reach the debris and lift up while stabilizing itself. Many experimental results verify our proposed methodology.

• 제어로봇시스템학회논문지
• /
• 제6권1호
• /
• pp.66-72
• /
• 2000

As the demand for the design of modular manipulators or special purpose manipulators has increased, task based design to design an optimal manipulator for a given task become more and more important. However, the complexity with a large number of design parameters, and highly nonlinear and implicit functions are characteristics of a general manipulator design. To achieve the goal of task based design, it is necessary to develop a methodology to solve the complexity. This paper addresses how to determine the kinematic parameters of a two-degrees of freedom manipulator with parallelogram five-bar link mechanism from a given task, namely, how to map a given task into the kinematic parameters. With simplified example of designing a manipulator with five-bar link mechanism, the methodology for task based design is presented. And it introduces formulations of a given task and manipulator specifications, and presents a new dexterity measure for manipulator design. Also the optimization problem with constraints is solved by using a genetic algorithm that provides robust search in complex spaces.

• 제어로봇시스템학회논문지
• /
• 제15권5호
• /
• pp.543-547
• /
• 2009

This paper describes the design, simulation, development, and experiment of a six degree-of-freedom micropositioning parallel manipulator. A movable stage was supported with six links, each of which extends with a dc-servo micropositioning actuator. In case of parallel manipulator, while the solution of the inverse kinematics is easily found by the vectors of the links which are composed of the joint coordinates in base and platform, but forward kinematic is not easily solved because of the nonlinearity and complexity of the parallel manipulator's kinematic output equation with the multi-solutions. The movable range of the prototype was ${\pm}25mm$ in the x- and y-directions and ${\pm}12.5mm$ in the z-direction. The minimum incremental motion of the prototype was $1{\mu}m$ in the x- and y-directions and $0.5{\mu}m$ in the z-direction. The repeatability of the prototype was ${\pm}2{\mu}m$ in the x- and y-directions and ${\pm}1{\mu}m$ in the z-direction. The motion performance was also evaluated by not only the computer simulation of CAD model but also the experiment using a capacitive sensor system.

• Korean Journal of Geomatics
• /
• 제2권1호
• /
• pp.65-73
• /
• 2002

GPS in the United States and GLONASS of the old Soviet Union are used currently as satellite navigation systems. Plans are being made to use the Galileo satellite system in Europe, and these plans focus on a combined application of the satellite navigation systems. In this study, we examined the possibility of effective application of a combination of GPS/GLONASS in urban areas, where 3-dimensional positioning is impossible with GPS alone. We analyzed the 3-D coordinate deviation of a GLONASS satellite by integration interval and compared it with GLONASS satellite coordinates in precise ephmerides by transforming it into WGS84. We also programmed GPS/GLONASS, analyzed 3-D positioning accuracy by static surveying and kinematic surveying with Ashtech Z18 receivers and Legacy receivers, and then compared the results to those of GPS surveying. As a result, we are able to decide the integration interval for producing GLONASS satellite coordinates in navigation and geographical information and construct a GPS/GLONASS data processing system by developing a DGPS/DGLONASS positioning program. If more than four GLONASS satellites are observed, the accuracy of GPS/GLONASS is better than that of GPS positioning. As a result of kinematic surveying in a congested urban area with skyscrapers, we discovered that the GPS/LONASS combination is very effective.