• Clean Technology
• /
• v.27 no.4
• /
• pp.332-340
• /
• 2021

With the recent reinforcement of emission standards, it is necessary to make efforts to reduce NOx from air pollutant-emitting workplaces. The NOx reduction method mainly used in industrial facilities is selective catalytic reduction (SCR), and the most commercial SCR catalyst is the ceramic honeycomb catalyst. This study was carried out to reduce the NOx emitted from steel plants by applying De-NOx catalyst coated on metallic monolith. The De-NOx catalyst was synthesized through the optimized coating technique, and the coated catalyst was uniformly and strongly adhered onto the surface of the metallic monolith according to the air jet erosion and bending test. Due to the good thermal conductivity of metallic monolith, the De-NOx catalyst coated on metallic monolith showed good De-NOx efficiency at low temperatures (200 ~ 250 ℃). In addition, the optimal amount of catalyst coating on the metallic monolith surface was confirmed for the design of an economical catalyst. Based on these results, the De-NOx catalyst of commercial grade size was tested in a semi-pilot De-NOx performance facility under a simulated gas similar to the exhaust gas emitted from a steel plant. Even at a low temperature (200 ℃), it showed excellent performance satisfying the emission standard (less than 60 ppm). Therefore, the De-NOx catalyst coated metallic monolith has good physical and chemical properties and showed a good De-NOx efficiency even with the minimum amount of catalyst. Additionally, it was possible to compact and downsize the SCR reactor through the application of a high-density cell. Therefore, we suggest that the proposed De-NOx catalyst coated metallic monolith may be a good alternative De-NOx catalyst for industrial uses such as steel plants, thermal power plants, incineration plants ships, and construction machinery.

• Journal of Bio-Environment Control
• /
• v.30 no.3
• /
• pp.188-195
• /
• 2021

This study was conducted to investigate the growth and quality characteristics of melon (Cucumis melo L.) cultivars and the irrigation requirements for cultivars. In our previous study in 2019, twelve melon cultivars including 'Dalgona' were examined for their cultivar characteristics under the same irrigation condition for all cultivars, and sorted into several groups based on different growth condition; for the internode length (from 0 to 20th node), leaf area, and fruit weight, 'Kingstar' belonged to the largest group, 'Worldstar' the middle group, and 'Dalgona' the smallest group. After analyzing the results of the previous experiment, 'Dalgona', 'Worldstar', 'Kingstar', and 'Rubyball' were selected as test cultivars for the growth group in 2020, and irrigated according to different irrigation levels for each cultivar. The control of the irrigation volume for each melon cultivar by monitoring the drainage rate during the cultivation periods showed that all four cultivars required a similar amount of irrigation in the 'early growth' stage where crops grew at about the same rate. From 'flowering time', however, the change in irrigation requirements showed a similar tendency for 'Worldstar' and 'Kingstar' and for 'Rubyball' and 'Dalgona' respectively. A sudden change in each irrigation volume was observed from the fruit set; 'Dalgona' began first to decline and 'Rubyball' was second, followed by 'Worldstar' and 'Kingstar'. In conclusion, the irrigation volume was the largest in 'Kingstar', followed by 'Worldstar', 'Rubyball', and 'Dalgona' in the same order as the growing amount of plant length, leaf area, and fruit weight. Therefore, it is necessary to control exactly the irrigation volume by reflecting the unique growth characteristics of each cultivar for the production of high-quality fruit in melon hydroponics, and especially to use great care when different cultivars are cultivated together.

• Korean Journal of Organic Agriculture
• /
• v.29 no.2
• /
• pp.223-240
• /
• 2021

This study was carried out to investigate the economic value of organic wheat production using gelatin·chitin microorganisms in Gwangsan-gu, Gwangju city. The soil condition of experiment field was clay loam Jisan series. The organically cultivated fields were sprayed gelatin and chitin degrading bacteria. The test was performed at conventionally cultivated field and organically cultivated field. Emergence of weed on organically cultivated field was significantly higher than conventionally cultivated field which sprayed herbicide before seeding. Weed emergence have a critical impact on grain yield. Occurrence of diseases and insect pests were higher than conventionally cultivated fields. In 2019, the amount of lodging in conventionally cultivated field were higher than conventionally cultivated field. In 2020, lodging and wet injury were occur in both field. Comparing yield element between organically and conventionally cultivated experimental area, grain yield in organically cultivated field was shown slightly higher amount than conventionally cultivated field. However in the actual yield of 2019, organically cultivated field shows 20% deceased yield because of overgrown weed. In 2020, weed emergence and yellow mosaic virus by wet injury cause 30% decease in the grain yield in organically cultivated field. Content of protein, carbohydrates, ash, water and fat in the grain were not different significance. In 2019, net incomes of conventionally cultivated wheat was 461,031 won/0.1 ha while organically cultivated wheat was 443,437 won/0.1 ha. In the rate of income, conventionally cultivated field was 83.0% as against organically cultivated field (73.3%). In 2020, net incomes of organically cultivated wheat was 437,812 won/0.1 ha while conventionally cultivated wheat was 418,281 won/0.1 ha. In the rate of income, conventionally cultivated field was 81.6% as against organically cultivated field (73.0%).

• Journal of Wetlands Research
• /
• v.20 no.4
• /
• pp.295-303
• /
• 2018

Inland wetlands in the Republic of Korea provide key breeding and wintering habitats, while coastal wetlands provide nutrient-rich habitats for stopover sites for East Asia/Australasia Flyway(EAAF) migrants. However, since the 1960's, Korea has reclaimed these coastal wetlands gradually for agriculture and urban expansion. The habitat loss has rippled across global populations of migrant shorebirds in EAAF. To protect a similar loss, the United States, specifically Missouri, developed the moist-soil management technique. Wetland impoundments are constructed from levees with water-flow control gates with specific soils, topography, available water sources, and target goals. The impoundments are subjected to a combination of carefully timed and regulated flooding and drawdown regimes with occasional soil disturbance. This serves a dual purpose of removing undesirable vegetation, while maximizing habitat and forage for wildlife. Flooding and drawdown schedules must be dynamic with constantly shifting climate conditions. Korea's latitude ($N33^{\circ}25^{\prime}{\sim}N38^{\circ}37^{\prime}$) is comparable to Missouri ($N36^{\circ}69^{\prime}{\sim}N40^{\circ}41^{\prime}$); as such, moist-soil management could prove to be an effective wetland restoration technique for Korea. In order to meet specific conservation goals (i.e. shorebird staging site restoration), it is necessary to test the proposed methodology on a site that can meet the required specifications for moist-soil management. Moist-soil management has the potential to not only create key habitat for endangered wildlife, but also provide valuable ecosystem services, including water filtration.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.43-54
• /
• 2019

In this study, results of completion inspection are investigated according to the performance of the firefighting construction supervision personnel and according to the necessity of clean air supply in a performance test of the firefighting construction supervision personnel. The results of the completion inspection are measured and the causes of defects in the fire protection facilities after issuance of a completion inspection certificate are analyzed. The findings of this investigation can be used to minimize the risk of apartment fires and improve the performance of firefighting construction supervision personnel. The results of this study are summarized as follows. First, the results of the completion inspection conducted by the firefighting construction supervision personnel varies according to particular occupation. The performance of fire facility supervisors from design companies and fire construction companies were significantly higher than the fire officers. Therefore, it is necessary to employ supervisors who have experience in supervising the construction of apartments, in order to improve the performance of fire construction supervision officers. Second, the analysis of the completion inspection results according to the necessity of a clean air supply for performance tests of firefighting construction supervision personnel showed that the necessity of a clean air supply was significantly higher for fire facility supervisors from design companies and fire construction companies than for the fire officers. In order to improve, the completion inspection should be carried out up until the completion date of the building. In addition, a system needs to be established to ensure that clients are not able to demand that a completion inspection certificate be issued on the construction completion date. Finally, it is found that defects of completion inspection after issuance of a completion inspection certificate affects the result of the completion inspection. The results of the completion inspections conducted by the fire facility supervisors from design companies and fire construction companies were affected significantly less by defects than that of the general contractors. Research shows that faults have occured in firefighting facilities after the issuance of a completion inspection certificate due to the client and the construction company demanding the issuance of the completion inspection certificate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.288-296
• /
• 2019

Radiation cooling has used ceilings or floors as cooling surfaces. In such cases, to avoid moisture condensation on the surface, the surface temperature needs be higher than the dew point temperature or an additional dehumidifier is added. In this study, with a goal for residential application, intentional moisture condensation on the cooling surface was attempted, which increased the cooling capacity and improved the indoor comfortness. This method included two separate refrigeration cycles - convection-type dehumidifying cycle and the panel cooling cycle. Test results on the panel cooling cycle showed that, at the standard outdoor ($35^{\circ}C/24^{\circ}C$) and indoor ($27^{\circ}C/19.5^{\circ}C$) condition, the refrigerant flow rate was 8.8 kg/h, condensation temperature was $51^{\circ}C$, evaporation temperature was $8.8^{\circ}C$, cooling capacity was 376 W and COP was 1.75. Furthermore, the panel temperature was uniform within $1^{\circ}C$ (between $13^{\circ}C$ and $14^{\circ}C$). As the relative humidity decreased, the cooling capacity decreased. However, the power consumption remained approximately constant. In the convection-type dehumidification cycle, the refrigerant flow rate was 21.1 kg/h, condensation temperature was $61^{\circ}C$, evaporation temperature was $5.0^{\circ}C$, cooling capacity was 949 W and COP was 2.11 at the standard air condition. When both the radiation panel cooling and the dehumidification cycle operated simultaneously, the cooling capacity of the radiation panel cycle was 333 W and that of the dehumidification cycle was 894 W, and the COP was 1.89. As the fan flow rate decreased, both the cooling capacity of the radiation panel and the dehumidification cycle decreased, with that of the dehumidification cycle decreasing at a higher rate. Finally, a possible control logic depending on the change of the cooling load was proposed based on the results of the present study.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.4
• /
• pp.63-73
• /
• 2019

Recently, as young and senior entrepreneurs are getting interested in starting a business, the domestic startup rate is gradually increasing. However, the survival rate of start-ups is so low. In this regard, this study empirically examines how the entrepreneurial intention affects both financial and non-financial start-up performances through the intermediation effects of experiential competence, financing competency, marketing competence and differentiated competitive advantage. In doing so, the purpose of this study is to find out the key elements to successful start-ups. To this end, the survey results of 200 start-ups in Pohang from January 21 to February 1, 2019 were used to test the research hypotheses. The results of the study are summarized as follows. First, it is shown that the entrepreneurial intention have a positive effect on the experiential competence, financing competence and marketing competence. Second, it is found that both experiential competence and marketing competence have significant positive effects on the differentiated competitive advantage. On the other hand, the financing competence has not been shown to have a significant effect on the differentiated competitive advantage, which might result from the characteristic of the data that most of the respondents are from new businesses. Third, it is shown that the differentiated competitive advantage has a positive effect on both financial and non-financial performances. In conclusion, the results of this study suggest a theoretical basis for the successful start-up performance. Namely, it is necessary for the founders of start-ups to secure differentiated competitive advantage through the entrepreneurial intention and the entrepreneurial competences such as financing competence and marketing competence because the differentiated competitive advantage leads to the successful financial and non-financial start-up performances. In addition, the results of this study suggest to both entrepreneurs and managers that for the successful business performance, it is important for them to make continuous efforts to come up with new ideas and to reinforce financing and marketing activities in order to achieve the differentiated competitive advantage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.376-383
• /
• 2019

This study was conducted to investigate academic self-efficacy, critical thinking disposition, and learning motivation, which influence problem solving ability in nursing students. Data were collected from June 4, 2018 to June 29, 2018, and the final 213 data points were used for analysis. The SPSS/WIN 22.0 program was used to conduct descriptive statics, Pearson's correlation coefficient, t-tests, ANOVA, Scheffe's test and multiple regression analysis. The problem solving ability according to the general characteristics differed among residential type (F=3.930, p=0.021) and satisfaction with major (F=4.618, p=0.011). In the correlation between academic self-efficacy, critical thinking disposition, learning motivation, and problem solving ability of the subject, academic self-efficacy (r=0.573, p<0.001), critical thinking disposition (r=0.620, p<0.001), and learning motivation (r=0.563, p<0.001). The factors affecting the problem solving ability of the study subjects were major satisfaction (${\beta}=.117$, p=0.036), academic self-efficacy (${\beta}=0.314$, p<0.001), critical thinking disposition (${\beta}=0.318$, p<0.001), and learning motivation (${\beta}=0.217$, p=0.004), with an explanatory power of 45.2%. In this study, it is necessary to confirm the effects of the development of the intervention program and the application of the program, which can improve the problem solving ability of nursing students.

• Korean Journal of Psychosomatic Medicine
• /
• v.26 no.2
• /
• pp.135-144
• /
• 2018

Objectives : The purpose of this study was to identify the differences of demographic and clinical characteristics between child-adolescents who received medical inpatient care and non-hospitalized adolescents after suicide attempts. Methods : The study included 35 child-adolescents who were hospitalized (Admission group) and 114 child-adolescents who were not hospitalized (Non-Admission group) as a result of a suicide attempt from 2009 to 2015. We compared sociodemographic, clinical, and suicide attempt-related characteristics through a chi-square test and logistic regression analysis to evaluate the differences between the two groups. Results : Child-adolescents of this study most commonly attempted suicide by poisoning, and for motivation of interpersonal problems. Admission group had significantly fewer attempts through injury by sharp objects (${\chi}^2=4.374$, p=0.037) and attempted suicide with a higher chance of actually dying when compared to Risk-Rescue Rating Scale (t=1.981, p=0.049). In addition, Admission group had relatively common motivation for academic problems (${\chi}^2=12.082$, p=0.001) and less motivation for interpersonal difficulties. (${\chi}^2=9.869$, p=0.002) Psychiatric diagnosis at the time of visiting the emergency department showed higher rates of depression in the admission group than Non-Admission group (${\chi}^2=8.649$, p=0.003). The results of logistic regression showed that depression affects hospitalization (OR=2.783, 95% CI 1.092-7.089, p=0.032). Conclusions : This study is meaningful in that it revealed the social and clinical characteristics of all child-adolescents who were hospitalized at a university hospital after attempting suicide. This study identified differences in motivation, methods, and psychiatric diagnosis of hospitalized adolescents and those who were not. Therefore, the results may help adolescent suicide attempters to get a discriminatory approach based on their admission.

• Journal of The Korean Society of Emergency Medicine
• /
• v.29 no.6
• /
• pp.663-670
• /
• 2018

Objective: Radio-contrast abdomino-pelvic computed tomography (APCT) is considered the gold standard diagnostic tool for an acute abdomen in the emergency department. On the other hand, APCT has a risk of contrast-induced nephropathy. Emergency physicians evaluate the creatinine (Cr) level prior to taking a APCT for the above reason but it takes time to evaluation the serum Cr level. This study hypothesized that Cr measured by a point-of-care test (POCT) can shorten the time to making clinically important decisions for patients with an acute abdomen. Methods: This prospective randomized study was conducted between March 2017 and October 2017. The subjects were divided into two groups (Cr measured by laboratory vs. Cr measured by POCT). To analyze the clinical acceptability for creatinine, agreement was demonstrated graphically by Bland-Altman plots. This study compared the time to make a clinically important decision by physicians and the length of stay at the emergency department in both groups. Results: A total of 76 patients were eligible for the study, 38 patients were assigned to each group. There was no statistically significant difference in the time to the first medical examination (P=0.222) and emergency department stay time (P=0.802). On the other hand, the time to recognition of the Cr level (P<0.001), time to performing APCT (P<0.001), time to decision making (P<0.001), and time to initiation of treatment (P<0.001) were shortened significantly in the point-of-care creatinine group. Conclusion: In this study, the POCT for creatinine can allow rapid decision making by shortening the time to performing the radio-contrast APCT than the laboratory for patients with an acute abdomen.