• 제목/요약/키워드: Kim Young-Sam regime

검색결과 7건 처리시간 0.023초

김영삼 정권하의 노동정치: 갈등적 다원주의에서 사회적 합의주의로 (Labor Politics under the Kim Young-Sam Regime: from Conflictual Pluralism to Social Partnership)

  • 김용철
    • 한국경제지리학회지
    • /
    • 제17권3호
    • /
    • pp.567-584
    • /
    • 2014
  • 이 글은 김영삼 정권하의 노동정치의 성격과 그 변화과정을 체계적으로 분석한다. 분석의 결과는 'IMF 경제위기'를 계기로 노동정치는 '갈등적 다원주의'에서 '사회적 합의주의'로 전환되었으며, 그 전환은 경제위기에 의해 촉발되었고, 변동의 방향은 정권적 차원의 제도적 맥락과 사회연합의 역학에 의해 규정되었음을 보여준다. 이 분석 결과가 함의하는 바는 경제위기나 국제적 압력이 노동정치의 변화 양상 및 방향을 규정짓는 변수가 아니고, 사회연합의 역학적 구도와 내용이 행위자들에게 새로운 인식과 전략적 선택을 강요하며, 이는 행위자들의 상호작용을 통해 최종적으로 노동정치의 변동을 낳는다는 점이다.

  • PDF

집속이온빔의 공정조건이 실리콘 가공에 미치는 영향 (The Parametric Influence on Focused Ion Beam Processing of Silicon)

  • 김준현;송춘삼;김종형;장동영;김주현
    • 한국공작기계학회논문집
    • /
    • 제16권2호
    • /
    • pp.70-77
    • /
    • 2007
  • The application of focused ion beam(FIB) technology has been broadened in the fabrication of nanoscale regime. The extended application of FIB is dependent on complicated reciprocal relation of operating parameters. It is necessary for successful and efficient modifications on the surface of silicon substrate. The primary effect by Gaussian beam intensity is significantly shown from various aperture size, accelerating voltage, and beam current. Also, the secondary effect of other process factors - dwell time, pixel interval, scan mode, and pattern size has affected to etching results. For the process analysis, influence of the secondary factors on FIB micromilling process is examined with respect to sputtering depth during the milling process in silicon material. The results are analyzed by the ratio of signal to noise obtained using design of experiment in each parameter.

마찰제어를 위한 Surface texturing의 Micro-scale dimple 밀도영향 (Influence on a density of micro-scale dimple for surface texturing on friction control)

  • 채영훈;김석삼
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 추계학술대회
    • /
    • pp.945-950
    • /
    • 2004
  • Surface texturing of tribological application is another attractive technology of friction reducing. Also, reduction of friction is therefore considered to be a necessary requirement for improved efficiency of machine. In this paper attempts to investigate the effect of density for micro-scale dimple pattern on bearing steel flat mated with pin-on-disk. We demonstrated the lubrication mechanism for a Stribeck curve, which has a relationship between the friction coefficient and a dimensionless parameter for lubrication condition. It is found that friction coefficient is depended on the density of surface pattern. It was thus verified that micro-scale dimple could affect the friction reduction.Lubrication condition regime has an influence on the friction coefficient induced the density of micro dimple.

  • PDF

포토리소그라피를 이용한 마이크로 딤플의 밀도에 따른 마찰 특성 (Friction Characteristics for Density of Micro Dimples Using Photolithography)

  • 김석삼;채영훈
    • 대한기계학회논문집A
    • /
    • 제29권3호
    • /
    • pp.411-417
    • /
    • 2005
  • Surface texturing of tribological application is another attractive technology of friction reducing. Also, reduction of friction is therefore considered to be a necessary requirement for improved efficiency of machine. In this paper attempts to investigate the effect of density for micro-scale dimple pattern using photolithography on bearing steel flat mated with pin-on-disk. We demonstrated the lubrication mechanism for a Stribeck curve, which has a relationship between the friction coefficient and a dimensionless parameter for lubrication condition. It is found that friction coefficient is depended on the density of surface pattern. It was thus verified that micro-scale dimple could affect the friction reduction considerably under mixed and hydrodynamic lubrication conditions from based on friction map. Lubrication condition regime has an influence on the friction coefficient induced the density of micro dimple.

혼합 및 유체윤활하에서 Micro-Scale Dimple Pattern의 마찰특성 (Friction Characteristics of Micro-scale Dimple Pattern under Mixed and Hydrodynamic Lubrication Condition)

  • 채영훈;김석삼
    • 한국정밀공학회지
    • /
    • 제22권2호
    • /
    • pp.188-193
    • /
    • 2005
  • Surface texturing of tribological application is another attractive technology of friction reducing. Also, reduction of friction is therefore considered to be a necessary requirement for improved efficiency of machine. In this paper attempts to investigate the effect of density for micro-scale dimple pattern on bearing steel flat mated with pin-on-disk. We demonstrated the lubrication mechanism for a Stribeck curve, which has a relationship between the friction coefficient and a dimensionless parameter for lubrication condition. It is found that friction coefficient is depended on the density of surface pattern. It was thus verified that micro-scale dimple could affect the friction reduction considerably under mixed and hydrodynamic lubrication conditions from based on friction map. Lubrication condition regime has an influence on the friction coefficient induced the density of micro dimple.

나노접촉 인쇄공정을 이용한 폴리머 유기정보표시소자 설계 및 구현 (Design and Implementation of Polymer-Light Emitting Diodes by using Nanocantact Printing)

  • 조정대;김광영;이응숙;최병오
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.1511-1513
    • /
    • 2005
  • The polymer-light emtting diodes(PLEDs) were comprised a design of OLED array, process develop by using ITO thin glass, and fabrication of PDMS stamp by using nanocontact printing. In the study, we describe a different approach for building OLEDs, which is based on physical lamination of thin metal electrodes supported by a PDMS stamp layer against an electroluminescent organic. We develop that devices fabricated in this manner have better performance than those constructed with standard processing techniques. The lamination approach avoids forms of disruption that can be introduced at the electrode organic interface by metal evaporation and has a reduced sensitivity to pinhole or partial pinhole defects. Also, it is easy to build patterned PLED with feature sizes into the nanometer regime. This method provides a new route to PLED for applications ranging from high performance displays to storage and lithography systems, and PLED can used for organic electronics and flexible display.

  • PDF

한국의 민주화와 미디어 : 정부와 시장 주류 미디어의 관계 (The relationship between the major market-based media and the government in Korea)

  • 조항제
    • 한국언론정보학보
    • /
    • 제16권
    • /
    • pp.168-206
    • /
    • 2001
  • This study attempts to examine the relationships between the major market-based media and the government after closing military regime era, 1961-1987. After the military regime was collapsed, while the mass media in Korea obtained independence and autonomy from government, they have been confronted with the terrible competition not so much comparatively as before. The watchdog role in the traditional liberalism, which is regarded as normative relationship between the media and the government would be transformed in accordance with the market condition and the maturity of democracy. Thus, the watchdog metaphor has been variously deviated in rower-centered society; lap dog, guard dog, attack dog. liberalists argue that the primary democratic role of the media is to art as a public watchdog overseeing the state. Social democrats, however, criticize them as simplistic conception which could be only applied to the government. They argue that the media should be seen as a source of redress against the abuse of all forms of power over others; the home, the economy, and the civil society. The lap dog view is that the media is overwhelmingly dependent on the established power structure contrary to the watchdog. While the guard dog perspective is a means to preserve the power structure alarming with playing 'conflict role', the attack do8 aims to the private interest of the media in intruding into the politics. The attack dog perspective by T. Patterson could be composed of the interpretive style of report, the game schema report over the policy schema in the election, and the negativism against politics and government. The market-dominant press has been likely to transform from lap-guard dog into attack-guard dog. In Roh Tae Woo government(1988-1992), while the press was a lessened lap-guard dog before three parties merger in 1990, after merger the press had been transformed as the reinforced lap-guard dog because this merger entailed joint, party-to-party negotiations, and the formation of the new party preceded by dissolution of the ruling blot. In the early stage of Kim Young Sam government(1993-1997), the press has kept in pace with the reform movement drive-forced by the government. However, the press withdrew the support of Kim's reform in reaching the level of threat to ruling bloc. The press coalesced only circumstantially with government and was interested in preserving some margin of independence. The failure of Kim's reform proved the political muscle of the press in post-autho-ritarianism. In the middle stage of Kim Dae Jung government (1998-) that resulted in the shift of power structure as once-opposition party leader, the stress has been a manifested attack-guard dog owing to the anti-cold war policy, the realignment policy of power, and the minority-base of Kim's government. The press has endeavored to hold political communication within limits relatively less threatening to the established order.

  • PDF