• Journal of Korea Multimedia Society
• /
• v.7 no.6
• /
• pp.841-850
• /
• 2004

This paper proposes a GA and GDM-based method for removing unnecessary rules and generating relevant rules from the fuzzy rules corresponding to several fuzzy partitions. The aim of proposed method is to find a minimum set of fuzzy rules that can correctly classify all the training patterns. When the fine fuzzy partition is used with conventional methods, the number of fuzzy rules has been enormous and the performance of fuzzy inference system became low. This paper presents the application of GA as a means of finding optimal solutions over fuzzy partitions. In each rule, the antecedent part is made up the membership functions of a fuzzy set, and the consequent part is made up of a real number. The membership functions and the number of fuzzy inference rules are tuned by means of the GA, while the real numbers in the consequent parts of the rules are tuned by means of the gradient descent method. It is shown that the proposed method has improved than the performance of conventional method in formulating and solving a combinatorial optimization problem that has two objectives: to maximize the number of correctly classified patterns and to minimize the number of fuzzy rules.

• Solar Energy
• /
• v.19 no.1
• /
• pp.47-57
• /
• 1999

A building and the solar are related to the privilege of solar benefit. To make step, it is required to build up an object, chase the position of object and the solar, find the shadow occurrence. On the subject of direct illuminance, an intensive emission of irradiation is proposed to directly project to the benefit area. Simultaneously on the indirect illuminance, the integration of a finite element incident to the benefit area can be multiplied by the hemisphere luminance. A caution should be paid to eliminate the occupation area of the object around on the hemispherical sky, which can help run more accurate prediction.

• Journal of Korean Neurosurgical Society
• /
• v.49 no.1
• /
• pp.75-78
• /
• 2011

We report a case of pedicle screw loosening treated by modified transpedicular screw augmentation technique using polymethylmethacrylate(PMMA), which used the anchoring effect of hardened PMMA. A 56-year-old man who had an L3/4/5 fusion operation 3 years ago complained of continuous low back pain after this operation. The computerized tomography showed a radiolucent halo around the pedicle screw at L5. We augmented the L5 pedicle screw with modified pedicle screw augmentation technique using PMMA and performed an L3/4/5 pedicle screw fixation without hook or operation field extension. This modified technique is a kind of transpedicular stiffness augmentation using PMMA for the dead space around the loosed screw. After filling the dead space with 1-2 cc of PMMA, we inserted a small screw. Once the PMMA hardened, we removed the small screw and inserted a thicker screw along the existing screw threading to improve the pedicle screws' pullout strength. At 10 months' follow-up, x-ray showed strong fusion of L3/4/5. The visual analogue scale (VAS) of his back pain was improved from 9 to 5. This modified transpedicular screw augmentation with PMMA using anchoring effect is a Simple and effective surgical technique for pedicle screw loosening. However, clinical analyses of long-term follow-up and biomechanical studies are needed.

• Archives of Craniofacial Surgery
• /
• v.9 no.1
• /
• pp.17-22
• /
• 2008

Purpose: For several decades, open reduction has been a controversial issue in mandibular condyle fracture. The authors have successfully used the open reduction and internal fixation with retromandibular approach and have found it to be satisfactory for mandibular condyle fracture. Methods: A total of 10 patients with mandibular condyle fracture underwent open surgical treatment using retromandibular approach. The incision for the retromandibular approach was carried below the ear lobe and the facial nerve branches were identified. Dissection was continued until the fracture site was exposed and internal fixation was performed with miniplate following intermaxillary fixation. The average period of joint immobilization was 1 weeks and the arch bars were removed in 3 weeks on average. The preoperative and postoperative panoramic view and three-dimensional computed tomography were compared. During the follow up period, we evaluated the presence of malocclusion, chin deviation, trismus, pain, click sound, facial nerve palsy, hypertrophic scar and skin fistula. Results: According to the radiographic findings, the fractured condyle was reducted satisfactorily in all patients without any symptoms of facial palsy. During the follow up period ranged form 6 to 12 months, all clinical symptoms were improved except in one case with chin deviation and malocclusion. Conclusion: Using open reduction and internal fixation of mandibular condyle fracture with retromandibular approach, all results were satisfactory with good functional outcomes and minimal complication. We concluded that the open surgical treatment should be considered as the first choice for mandibular condyle fracture management.

• The Korean Journal of Physiology and Pharmacology
• /
• v.22 no.5
• /
• pp.555-566
• /
• 2018

Human umbilical cord blood mesenchymal stem cells (hUCB-MSCs) are used in tissue repair and regeneration; however, the mechanisms involved are not well understood. We investigated the hair growth-promoting effects of hUCB-MSCs treatment to determine whether hUCB-MSCs enhance the promotion of hair growth. Furthermore, we attempted to identify the factors responsible for hair growth. The effects of hUCB-MSCs on hair growth were investigated in vivo, and hUCB-MSCs advanced anagen onset and hair follicle neogeneration. We found that hUCB-MSCs co-culture increased the viability and up-regulated hair induction-related proteins of human dermal papilla cells (hDPCs) in vitro. A growth factor antibody array revealed that secretory factors from hUCB-MSCs are related to hair growth. Insulin-like growth factor binding protein-1 (IGFBP-1) and vascular endothelial growth factor (VEGF) were increased in co-culture medium. Finally, we found that IGFBP-1, through the co-localization of an IGF-1 and IGFBP-1, had positive effects on cell viability; VEGF secretion; expression of alkaline phosphatase (ALP), CD133, and ${\beta}-catenin$; and formation of hDPCs 3D spheroids. Taken together, these data suggest that hUCB-MSCs promote hair growth via a paracrine mechanism.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.4
• /
• pp.451-456
• /
• 2008

In this paper. we experimented and analyzed about evaporation and breaking process of filament by external flames and adsorption pattern in lamp bulb of evaporated filament particle according to the set-up directions of incandescent lamps. In the results of experiments, we could know that filament evaporation behavior of incandescent lamp that is established by down direction happened most vigorously and is difference in adsorption pattern of filament particle that is vaporized according to set-up directions. Also, glass bulbs were melted and filaments were evaporated by external flames, and finally molten marks were discriminated. We expect that become important data that this study finding reveals burnout cause of incandescent lamp in scene of a fire.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.588-590
• /
• 1994

This paper describes current controlled PWM technique of IPM synchronous motors for a wide variety of speed control applications. The IPM synchronous motors have a saliency, in which the q-axis inductance is larger than the d-axis inductance. As a consequence, there exists a reluctance torque component Thus when this component is added to the torque component produced by the stator currents and the air-gap flux, IPM motor drives are readily applicable where full torque Is required up to full or base speed. They are however limited in their ability to operate in the power limited regime where the available torque is reduced as the speed is increased above its base value. This paper reviews the operation of the IPMSM drives when they are constrained to be within the permissible envelope of maximum inverter voltage and current to produce the rated power and to provide this with the highest attainable rotor speed. The wide variety of speed control strategy is analyzed and the performance is investigated by the computer simulation using actual parameters of a drive system. Simulation results are given and discussed.

• Archives of Plastic Surgery
• /
• v.34 no.2
• /
• pp.217-221
• /
• 2007

Purpose: Reconstruction of the soft tissue defect exposing Achilles tendon is a formidable challenge because of the paucity of soft tissue and relatively poor blood supply. This article describes the reconstruction of soft tissue defect exposing Achilles tendon using gracilis muscle free flap and split-thickness skin graft. Methods: From 2000 to 2005, four patients with soft tissue defect exposing Achilles tendon and infection were operated using gracilis muscle free flap and split-thickness skin graft. The defect size ranged from 3.5 to 5cm wide and 6.5 to 8cm long. The mean postoperative follow-up was twenty months. Results: All the flaps were survived without necrosis and infection. We obtained the satisfactory results with good functional and aesthetical outcomes. All cases showed good results with the characteristics of a relatively thin flap without additional debulking procedure. Conclusion: Gracilis muscle free flap with split thickness skin graft could be a good option for reconstruction of soft tissue defect of posterior ankle, exposing Achilles tendon with minimal morbidity of the donor site.

• Archives of Plastic Surgery
• /
• v.39 no.1
• /
• pp.31-35
• /
• 2012

Background : Orbital roof fractures are frequently associated with a high energy impact to the craniofacial region, and displaced orbital roof fractures can cause ophthalmic and neurologic complications and occasionally require open surgical intervention. The purpose of this article was to investigate the clinical features and treatment outcomes of orbital root fractures combined with neurologic injuries after early reconstruction. Methods : Between January 2006 and December 2008, 45 patients with orbital roof fractures were admitted; among them, 37 patients were treated conservatively and 8 patients underwent early surgical intervention for orbital roof fractures. The type of injuries that caused the fractures, patient characteristics, associated fractures, ocular and neurological injuries, patient management, and treatment outcomes were investigated. Results : The patients underwent frontal craniotomy and free bone fragment removal, their orbital roofs were reconstructed with titanium micromesh, and associated fractures were repaired. The mean follow up period was 11 months. There were no postoperative neurologic sequelae. Postoperative computed tomography scans showed anatomically reconstructed orbital roofs. Two of the five patients with traumatic optic neuropathy achieved full visual acuity recovery, one patient showed decreased visual acuity, and the other two patients completely lost their vision due to traumatic optic neuropathy. Preoperative ophthalmic symptoms, such as proptosis, diplopia, upper eyelid ptosis, and enophthalmos were corrected. Conclusions : Early recognition and treatment of orbital roof fractures can reduce intracranial and ocular complications. A coronal flap with frontal craniotomy and orbital roof reconstruction using titanium mesh provides a versatile method and provides good functional and cosmetic results.

• Journal of Chest Surgery
• /
• v.44 no.2
• /
• pp.142-147
• /
• 2011

Background: Endovascular aortic aneurysm repair (EVAR) has come into use and been widely extended because of the low complication rate and less-invasiveness. This article aimed to describe our experience in the treatment of abdominal aortic aneurysm with EVAR. Materials and Methods: A retrospective review was conducted for the 22 patients who underwent EVAR in a single hospital December 2001 to June 2009. Results: The mean age of the patients was $68.5{\pm}7.6$ years. There were several risk factors and comorbidities in 20 patients (90.9%). The mean diameter of the aortic aneurysms was $61.2{\pm}12.9$ mm. The mean length, diameter, and angle of the aneurysmal neck were $30.5{\pm}15.5$ mm, $24.0{\pm}4.5$ mm, and $43.9{\pm}16.0^{\circ}$, respectively. The mean follow-up period of the patients was $28.8{\pm}29.5$ months. The 30-day postoperative mortality was none. Seven patients (31.8%) had endoleaks during the hospital stay and three patients (13.6%) had endoleaks during the follow-up period. One patient (4.5%) died due to a ruptured aortic aneurysm. The cumulative patient survival rates were 88.2%, 88.2%, and 70.6% at 1, 3, and 5 years of follow-up, respectively. Conclusion: EVAR is currently a safe, feasible procedure for high risk patients with abdominal aortic aneurysm because of low postoperative complication and mortality if patients are selected properly and followed up carefully.