• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 추계학술대회 논문집
• /
• pp.171-179
• /
• 1991

This paper refers to the results of a study on the usefulness of simulation techniques based on both modeling and experiments of KICK DOWN pressure control circuit using an duty solenoid valve controlled by pulse width modulation for an automatic transmission. In this study, dynamic characteristics of solenoid valve plunger and first pressure are verified. Besides, this paper shows the design data for improvement of feeling in changing of gear by means of simulation according to varying the size of jet orifice and temperature of automatic transmission fluid, which are the important variables of the first pressure.

• 한국운동역학회지
• /
• 제21권1호
• /
• pp.57-65
• /
• 2011

This research was conducted to biomechanically analyze Tippelt motion in parallel bars, and establish technical understanding. To achieve that goal, the performances of the Tippelt acts carried out by five world top-class national gymnasts in the parallel bars 3-dimensional cinematographic analysis and EMG analysis were conducted and following conclusion were obtained. The Tippelt motions of excellent national gymnasts perform tap motion through the down swing of a large circular movements, and perform kick-out motion rapidly extending shoulder joint angle and hip joint angle with the trunk in a position close to perpendicular position at the vertical downwardness of the grasping the bars. At this time, if handstand starting the movement is too delayed or rapidly down swung, it was shown that from the initial falling, unnecessary muscular power was wasted in trapezius, anterior deltoid, erector spinae, latissimus dorsi, upper rectus abdominis, lower rectus abdominis. The muscular parts in tap motion generating muscle action potential were pectoralis major, rectus femoris, upper rectus abdominis, lower rectus abdominis, and those in kick-out motion were upper rectus abdominis, lower rectus abdominis, trapezius and anterior deltoid.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.201-208
• /
• 2002

In this paper, the control strategy of ratio changing system for a metal belt CVT adopting primary pressure regulation is developed, and the shirting performance of pressure regulating type CVT with the suggested control strategy is investigated. The control strategy suggested in this study is composed of 2 feedback loop, one is speed ratio feedback and the other is primary pressure feedback. The pressure feedback is adopted to ensure prohibiting a belt slip during transient period in a fast downshift mode. Simulation results show that the system with suggested control strategy gives appropriate response time and tracking Performance for upshift and also gives a proper primary pressure which can prohibit the belt slip. In addition, it is fecund that the given system has an acceptable servo property in tracking the target speed ratio and robustness for the disturbance of line pressure.

• 한국자동차공학회논문집
• /
• 제5권5호
• /
• pp.9-19
• /
• 1997

In this paper, the modeling and analysis of dynamic characteristics has been carried out for friction clutches and brakes in an automatic transmission. From the operating oil pressure generated by the valve-body, time delay by check valve and the movement of piston has been examined. Also torque capacity and torque transferred at the clutch is studied. Heat capacity and temperature distribution at the reaction plate of clutch are codeled by time-dependent, nonhomogeneous partial differential equation, and brake torque, brake time, and the amount of heat generated are investigated. It is found that the time delay at the check valve is very short but dominant at the spool.

• 자동차안전학회지
• /
• 제9권4호
• /
• pp.20-25
• /
• 2017

Dynamo based vehicle inspection device is end of line device for automobile industry. The device is utilized as implementing vehicle functionality inspection such as brake force, cruise control, kick-down acceleration, CAN inspection. As dynamo based inspection device is broadly adopted in automobile industry, the dynamic study is required to verify the vehicle test equipment reliability. This research recommends appropriate dynamic brake force inspection procedure and theoretical background for developed equipment. Dynamic characteristic of brake force implementation to roller is simplified. With simplified characteristics, the indirect brake force measurement strategy is developed and adopted. Comparison of each brake force result, the appropriate brake force inspection criterion is given.

• Journal of Chest Surgery
• /
• 제16권2호
• /
• pp.255-259
• /
• 1983

Thirteen cases of traumatic diaphragmatic injuries treated at the Dept. of Thoracic & Cardiovascular Surgery in Kyung-Hee University Hospital from Jan. 1973 to Dec. 1982, were reviewed in this study. 1. Of 13 cues, 11 were male and 2 were female, a ratio of 5.5:1. This ratio revealed high incidence in male patients. The age distribution was ranged from 2 to 59 years. 2. The causes of traumatic diaphragmatic injuries; 6 were traffic accidents, 4 were stab wounds, 1 was falling down, 1 was gun shot wound and 1 was kick. 3. Operation were performed in 11 patients. No operation was done in 2 patients. 4. There were 100% of other associated injuries, the most frequent was having hemothorax. 5. 2 cases of death occurred in not operated patients. One was intracranial hematoma, and the other was hypertensive encephalopathy.

• 한국운동역학회지
• /
• 제23권2호
• /
• pp.131-139
• /
• 2013

Naejirgi is one of the fastest, most forceful and most often being used kicks in Taekkyon games, The purpose of this study was to investigate kinetic factors on two types of Naejirgi kick, one of which uses knee bending of supporting leg and the other uses little it. 12 taekkyoners (11 males and one female) who are the students of Y University participated in this study. They have been practicing on Taekkyon for five years or more. Positions of CoM, the elapsed time of each phase, vertical ground reaction forces, joint moments and impulses of supporting leg were analyzed for this study. The results were as follows; in Naejirgi with knee bending of supporting leg than without knee bending of supporting leg, the vertical motion range of whole body CoM was larger during phase 2 and 3, the elapsed time of phase 4 were longer, players stayed longer in the nearest location to opponent, during phase 4 the vertical ground reaction forces of supporting foot were larger, and joint extension moments and angular impulses of supporting leg (especially knee) were larger. In conclusion supporting knee bending is not a useful strategy for Naejirgi, because players stay longer in the nearest position to opponent and consumed more muscle force and energy for producing the vertical momentum which is unnecessary for pushing down the opponent.

• 한국운동역학회지
• /
• 제15권3호
• /
• pp.21-30
• /
• 2005

The purpose of this study is helps to make full use for perfect performance by grasping the defects of Tichonkich motion performed by athlete CSM For this, the study analyzed kinematical variables through Tichonkich motions performed at the first selection competition(1st trial) and final selection competition(2nd trial) for the dispatch to the 28th Athens Olympic Games using the three-dimensional cinematographical method with a high-speed video camera, and obtained the following results. 1. During Tichonkich motion, the execution time of up swing and the right hand moving to the left bar was shorter in the 2nd trial than the 1st one, while the execution time of down swing, the support of the left bar and the right hand moving to the right bar was longer in the 2nd trial than the 1st trial. 2. The horizontal position of COG in the 2nd trial was -35cm in the 1st stage, 42cm in the 3rd stage and 29cm in the 4th stage, that is, it showed a great swing focused on the circular movement compared to the 1st trial, while the vertical position of COG was -59cm in the 2nd stage, that is, it showed a small swing focused on a up and down movement. Also the 5th stage vertical position was 98cm, and the 6th stage vertical position was 95cm in the 2nd trial which were higher than those of the 1st trial, so it has provided magnificence required in the modern gymnastics. 3. And it was indicated that the horizontal velocity at the down swing phase proceeded forward more rapidly in the 2nd trial than that in the 1st trial, and the reverse ascent made a rapid vertical rise lessening left and right velocity change. And in the 5th stage, the 2nd trial was kept very slower in horizontal, vertical and left and right velocity that in the 1st trial, so it reached a handstand with leisurely movement. 4. In the 2nd trial, shoulder joint of the 1st, 2nd, 3rd stages kept a larger angle than that in the 1st trial, that is, it made a great swing while in the 1st trial, it showed a swing movement dependent on kick movement by the flexion and extension of hip joint. Also in the 2nd trial, the body formed a vertical posture with both hands supporting the left bar and hip joint was kept larger as $198^{\circ}$ and $190^{\circ}$ in the 5th and 6th stage than that in the 1st trial, so it made a handstand with the body uprightly stretched out, and magnificent and stable movement.

• 전자공학회논문지SC
• /
• 제48권1호
• /
• pp.18-23
• /
• 2011

본 연구는 자동차에 장착된 일반적인 자동변속기의 문제점을 향상시키기 위해서 지능형 변속선도 결정 모듈을 제안한다. 전형적인 자동변속기의 변속선도는 운전자의 습관 및 성향이 반영되지 않기 때문에 운전자가 원하는 변속점을 제공하지 못한다. 기존의 변속선도는 불필요한 기어의 변화가 발생하고 연료효율에도 좋지 않다. 또한 가끔 킥-다운과 같은 현상이 발생한다. 그래서 본 논문에서는 개인적인 운전자의 운전 스타일을 고려한 변속선도를 결정하는 지능형 변속 제어 방법을 연구한다. 운전스타일은 주행 중인 자동차의 실제 데이터를 이용하여 운전자의 성향 및 운전 습관에 의해 판단된다. 이 모듈은 실제 자동차 데이터를 학습하기 위해 신경회로망을 사용한 계층적 구조로 구성된다. 제안된 지능형 변속선도 제 어 모듈은 각 운전자의 운전스타일에 따라 운전에 필요한 토크와 속도를 제공하여 운전자에게 적합한 변속점과 변속시간을 제공할 수 있다.

• 환경영향평가
• /
• 제21권6호
• /
• pp.859-877
• /
• 2012

In this study, Echo-sounder($E_s$) monitoring methodology was applied to test environmental impacts of artificial weirs(SCW and JSW) in the Yeongsan River on fish community and habitat structures at first time, and was compared with conventional fish sampling methodologies($C_s$). For the Es monitoring in the fields, parallel transect methods was employed in determining the survey distance interval with every 125 m within the upper-lower 2 km of the weirs. Four different fish sampling gears such as casting nets, kick nets, fyke nets, and gill nets were used for applications of $C_s$ monitoring methodology. According to the Echo-sounder monitoring, fish density, expressed as a number of individuals per square meter, along the longitudinal axis of the weir was significantly greater(JSW, t = 3.506, n = 30, p < 0.001) in the down-river reach of the weir than in the up-river reach. Also, fish density along the vertical water column was highest at mid-depths of Seungchon weir, which has simple habitat substrates, while fish density was highest at hypolimnetic depth of Juksan weir. According to fish sampling by the $C_s$ methodology, the fish compositions decreased as the river goes upward, and significant differences(JSW, t = 0.248, n = 30, p < 0.05) in the compositions of fish species occurred between up-reach and down-reach of the weirs. The dominant species near the two weirs were Opsarichthys uncirostris amurensis, Hemiculter eigenmanni and Coilia nasus. Overall, our fish and habitat data, based on $E_s$ and $C_s$ monitoring methodologies, suggest that the weirs disturbed the rivers due to initial habitat disturbances by the weir constructions as well as the barrier roles of weirs on fish passage and migrations. More long-term scientific and systematic fish impact monitoring and assessments($E_s$ and $C_s$) are required in the future to predict changes of ecological structures and functions on the constructions of the weirs.