• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.2
• /
• pp.33-40
• /
• 2018

In an environment with a large network bandwidth, maximizing bandwidth utilization is an important issue to increase transmission efficiency. End-to-end transfer efficiency is significantly influenced by factors such as network, data transfer nodes, and intranet network security policies. Science DMZ is an innovative network architecture that maximizes transfer performance through optimal solution of these complex components. Among these, the data transfer node is a key factor that greatly affects the transfer performance depending on storage, network interface, operating system, and transfer application tool. However, tuning parameters constituting a data transfer node must be performed to provide high transfer efficiency. In this paper, we propose a method to enhance performance through tuning parameters of 100Gbps data transfer node. With experiment result, we confirmed that the transmission efficiency can be improved greatly in 100Gbps network environment through the tuning of Jumbo frame and CPU governor. The network performance test through Iperf showed improvement of 300% compared to the default state and NVMe SSD showed 140% performance improvement compared to hard disk.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.2
• /
• pp.221-227
• /
• 2016

The main shaft is one of the key components connecting the rotor hub and gear box of a wind power generator. Typically, main shafts are manufactured by open die forging method. However, the main shaft for large MW class wind generators is designed to be hollow in order to reduce the weight. Additionally, the main shafts are manufactured by a casting process. This study aims to develop a manufacturing process for hollow main shafts by the open die forging method. The design of a forging process for a solid main shaft and hollow shaft was prepared by an open die forging process design scheme. Finite element analyses were performed to obtain the flow stress by a hot compression test at different temperature and strain rates. The control parameters of each forging process, such as temperature and effective strain, were obtained and compared to predict the suitability of the hollow main shaft forging process. Finally, high productivity reflecting material utilization ratio, internal quality, shape, and dimension was verified by the prototypes manufactured by the proposed forging process for hollow main shafts.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.7
• /
• pp.777-782
• /
• 2011

Micro features on the surface are well-known to have significant effects on optical or mechanical properties such as the optical interference, reflectance at the surface, contact angle, interfacial friction, etc. These surface micro features are increasingly employed to enhance the functionality of the applications in various application areas such as optical components for LCD or solar panel. Diverse surface features have been proposed and some of them are showing excellent efficiency or functionality, especially in optical applications. Most applications employing the micro features need manufacturing process for mass production and the injection molding and roll-to-roll forming, which are typical processes for mass production adopting polymeric materials, may be also preferred for micro patterned plastic product. Since the functionality or efficiency of the surface structures generally depends on the shape and the size of the structure itself or the array of the structures on the surface, it would be very important to replicate the features very precisely as being designed during the molding the micro pattern applications. In this paper, a series of research activities is introduced for roll-to-roll forming of micro patterned film including filling of patterns with UV curable resin, demolding of surface structures from the roll tool, control of surface energy and cure shrinkage of resin and dispose time and intensity of the UV light for curing of UV curable resin.

• Journal of Korean Society of Transportation
• /
• v.22 no.2 s.73
• /
• pp.121-130
• /
• 2004

In these days, multiple-path generation method is highly demanded in practice and research areas, which can represents realistically travelers behavior in choosing possible alternative paths. The multiple-path generation algorithm is one of the key components for policy analysis related to ATIS, DRGS and ATMS in ITS. This study suggested a method to generate multiple Possible paths from an origin to a destination. The approach of the suggested method is different from an other existing methods(K-shortest path algorithm) such as link elimination approach, link penalty approach and simulation approach. The result of the multi-label vine-building shortest path algorithm(MVA) by Kim (1998) and Kim(2001) was used to generate multiple reasonable possible paths with the concept of the rational upper boundary. Because the MVA algorithm records the cost, back-node and back-back node of the minimum path from the origin to the concerned node(intersection) for each direction to the node, many potential possible paths can be generated by tracing back. Among such large number of the potential possible paths, the algorithm distinguishes reasonable alternative paths from the unrealistic potential possible paths by using the concept of the rational upper boundary. The study also shows the very simple network examples to help the concept of the suggested path generation algorithm.

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.656-663
• /
• 2010

In order to improve the consumer acceptance of fragrant yellow hybrids of $Phalaenopsis$ ($Phal.$), crosses between yellow hybrid varieties were made and the obtained hybrids were investigated for horticultural characteristics as well as difference in fragrance patterns. Cross combination of $Phal.$ Brother lawrence and $Phal.$ Brother saragold yielded good seedling population of 500 plants. Segregation was noticed in color density, spot and stripe patterns on yellow color base of petal and also in fragrance. Six lines with multi-branch on flower stalk and strong fragrance flower were finally selected. Volatile fragrance components were compared among $Phal.$ Brother lawrence, $Phal.$ Brother saragold and their hybrids by GC/SAW electronic nose. In the derivative pattern of chromatogram and polar derivative pattern of fragrance, similar dominant peaks appeared on retention time 7-9 s and some hybrid lines had two strong peaks on retention time 20-25 s, respectively. Also in polar frequency pattern of fragrance obtained by $VaporPrint^{TM}$ image analysis among parent flowers and hybrids, an identical strong peak near 8 s of retention time was shown. This single fragrance component is considered a key element of fragrance in $Phal.$ Brother lawrence, $Phal.$ Brother saragold and their hybrids. This peak could be used as a marker for the breeding of fragrance in $Phalaenopsis$.

• Journal of the Korean Vacuum Society
• /
• v.18 no.6
• /
• pp.440-446
• /
• 2009

Indium tin oxide(ITO) substrate is one of the key components of the touch panel and its sputtering process is dependent on the characteristics of various touch panel, such as driving type, size of panel, and the intended use. In this study, we optimized the sputtering condition of ITO film on polycarbonate(PC) by using in-line sputtering method for the application to resistive type touch panel. We varied the $O_2$/Ar gas ratio, sputtering power, pressure and moving speed of substrate to deposit ITO films at room temperature with the base vacuum of $1{\times}10^{-6}\;torr$. The sheet resistance and its uniformity, the transmittance, the thickness of the ITO film on PC substrate are investigated and analyzed. The optimized process parameters are as follows : the sheet resistance is $500{\pm}50\;{\Omega}$/□, the uniformity of sheet resistance is lower than 10%, the transmittance is higher than 87 % at 550nm, and the thickness is about 120~250. The optimized deposition conditions by in-line sputtering method can be applied to the actual mass production for the ITO film manufacturing technology.

• Clinical and Experimental Pediatrics
• /
• v.51 no.3
• /
• pp.225-232
• /
• 2008

The mission of National Health Screening Program for Infant and Children is to promote and improve the health, education, and well-being of infants, children, families, and communities. Although the term 'diagnosis' usually relates to pathology, a similar diagnostic approach applies to the child seen primarily for health supervision. In the case of health, diagnosis determines the selection of appropriate health promoting and preventive interventions, whether medical, dental, nutritional, educational, or psychosocial. Components of the diagnostic process in health supervision include the health 'interview'; assessment of physiological, emotional, cognitive, and social development (including critical developmental milestones); physical examination; screening procedures; and evaluation of strengths and issues. Open and informed communication between the health professional and the family remains the most significant component of both health diagnosis and health promotion. Families complete medical history forms at their health supervision visit. Family-friendly questionnaires, checklists, and surveys that are appropriate for the child's age are additional tools to improve and update data gathering. This type of information helps initiate and inform discussions between the family and the health professional. This article provides a comprehensive review of current National Health Screening Program for Infant and Children in Korea.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.715-722
• /
• 2020

This paper proposes a design verification method based on system dynamics for offshore separation systems. Oil and gas separation systems are key components of offshore oil platforms; these systems determine the competitiveness of engineering, procurement, and construction (EPC) projects, especially in terms of added value. However, previous research on design verification has been limited to the process and deliverables of design. To address this, the study aims to develop a comprehensive design verification method and the associated functions from the perspective of project management, for the entire project life-cycle of offshore structures. The proposed methodology for design verification is expected to contribute toward effective and detailed designs as well as improve the competitiveness of EPC companies in constructing of shore structures during the early design stages. We first analyzed the separation system of the FPSO using the design verification method adopted by advanced countries and compared it with the system dynamics process formalized as ISO 15288. Subsequently, a tailored process for the design verification of the offshore structure was derived. It is shown that the proposed design verification method can be applied to the front-end engineering design process of of shore structures. Moreover, it can contribute toward the successful performance of offshore projects in the future and also minimize design changes and critical risks during the construction of these offshore structures.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.3
• /
• pp.237-250
• /
• 2013

At Gosan ABC superstation in Jeju Island, we measured organic carbon (OC) and elemental carbon (EC) in $PM_{2.5}$ from October 2009 to June 2010 using a Sunset Laboratory Model-4 Semi-Continuous OC/EC Field Analyzer. It employs TOT (Thermal-Optical-Transmittance) method with NIOSH 5040 protocol and enables to continuously monitor OC and EC concentrations with 1-hour time resolution. The mean values of OC and EC for the entire period of measurements were $2.1{\pm}1.4{\mu}g/m^3$ and $0.7{\pm}0.6{\mu}g/m^3$, respectively. The OC/EC ratio was 3 and EC accounted $25{\pm}2.1%$ of total carbon (TC, TC=OC+EC). Although OC and EC showed similar trend in seasonal variation, the ratio of OC to EC was the highest in early summer when temperature was the highest and the air was affected by biomass burning in the southern part of China. In winter, the high OC and EC concentrations were likely influenced by increased coal combustion from residential heating. The high OC and EC concentrations were observed during events such as haze, dust, and the combination of the two. During the haze events, OC and EC were enhanced with increase in $PM_{10}$, $PM_{2.5}$, $SO_2$, and $NO_2$ with broad maxima. When dust occurred, both OC and EC started decreasing after reaching their maxima a couple of hours before $PM_{10}$ maximum. The peak separation of carbonaceous species and aerosol masses with time was more noticeable when haze event was followed by dust plume. These results confirm that OC and EC are key components of haze occurring in the study region.

• Journal of the Korean Society for information Management
• /
• v.37 no.1
• /
• pp.51-78
• /
• 2020

Recently, the emphasis on self-directed learning and lifelong education is increasing the importance of school libraries in the curriculum. Accordingly, various studies have been conducted mainly from a structural, institutional and operational point of view. However, more research is necessary on the micro topics such as school library users' autonomous intrinsic motivations in the sense that school libraries play key roles in autonomy-based self-directed education. This study aims at finding out what types of school library use motivations are more important and the degree to which the use motivations affect the school library service quality based on the self-determination theory. In addition, this study examines how the use motivations and the perceived service quality vary depending on the school grade of the library users. Based on a focus-group-interview pilot study, a questionnaire survey was administered on the effects of school library motivations on perceived library service quality to 588 students from 5 high schools and 2 middle schools in Seoul. When the service quality and its components, service affect, information control, and library as place were set as dependent variables, in all these four cases, intrinsic motivations were more significant than extrinsic motivations. In addition, when middle school students and high school students were selected as separate analysis target groups, the results of both analyses show that the higher the intrinsic motivations were, the higher the perceived service quality was. The contribution of this study is that it applies the self-determination theory to school library service, measures the influence of motivation type based on the theoretical basis, and focuses on micro aspects to improve school library services.