• Journal of Soil and Groundwater Environment
• /
• v.6 no.1
• /
• pp.13-21
• /
• 2001

The characteristics of $Co^{2+}$ removal in the kaolinite column were analyzed by electrokinetic remediation. Ethanoic buffer was injected in the kaolinite column and $CH_3$COOH was continuously added to the cathode reservoir to restrain the pH increase. The pH of the cathode of the kaolinite column was 4.0 at first. Since it was controlled to be under 6.5 after 43.6 hours due to ethanoic buffer, precipitation of ${Co(OH)}_2$ was not formed in the column. Effluent rate increased with time and $Co^{2+}$ removal in the column at initial time was mainly controlled by ion migration. 13.1% of total $Co^{2+}$ in the column was removed after 10 hours, the 46.8% of total $Co^{2+}$ after 20.8 hours, and the 71.7% of total $Co^{2+}$ after 30.1 hours, the 94.6% of total $Co^{2+}$ after 43.6 hours, Meanwhile, the residual concentrations in the column calculated by the developed model were similar to experiment results.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.3
• /
• pp.85-94
• /
• 2002

Overall objective of this study was to evaluate the electrochemical characteristics of fine soils during the electrokinetic(EK) remediation. Zeta potential of kaolinite as a function of solution pH and surfactant concentration was investigated to make a relationship with electroosmotic flow direction and rate. During the EK experiments, pH of pore solution, electroosmotic permeability($k_e$), electric conductivity($\delta_e$) and voltage distribution was measured, respectively, The point of zero charge(PZC) of kaolinite was estimated to be about 4.2 and the zeta potential of kaolinite above PZC was more negative as solution pH increased. Sorption of surfactants on the kaolinite altered the zeta potential of kaolinite. resulting from the variation of electrochemical characteristics of kaolinite surface. hs the EK experiment progressed, low pH was predominant over most of the kaolinite specimen and thus resulted in very low mass and charge flow. The $k_e$ and $\delta_e$ was also affected by the variation of voltage drop across the EK column with time. Results from this study implied that zeta potential of kaolinite affected by the pH variation of pore solution and voltage distribution in soil column played important role in the determination of mass and charge flow during EK process. It was also suggested that pH adjustment or addition of suitable sorbates could alter the electrochemical characteristics of soil surface and thus maintain high mass and charge flow rate with time.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1098-1108
• /
• 2008

Batch type and column type experiments were performed in order to predict adsorption and movement within soil. Clay minerals montmorillonite and kaolinite were respectively added to paraquat which is a cationic compound with long residual time, 2,4-D which is an anionic compound with relatively short residual time and napropamide which is an amphoteric compound. Therefore, it is very important to determine the movements of toxic pollutants in the ground soil to establish measures to prevent soil grounds contamination and to restore contaminated soils effectively, because contamination of soil is getting severe due to these toxic wastes, industrial waste water, and agricultural chemicals, etc. Therefore, in this study, we have carried out column and batch experiments by using general toxic organic compounds as test samples in order to restore contaminated soils effectively as well as to prepare a basic data to develop absorbents that will remove various toxic organic compounds, with a grandiose purpose to prevent contaminations of soil and grounds due to various toxic organic compounds.

• Journal of Korea Soil Environment Society
• /
• v.2 no.1
• /
• pp.35-44
• /
• 1997

A column study using artificial acid rain was conducted to evaluate the buffering capacities in soil layer and host rock. In an effort to compare the effect of composition of host root two valleys of which compositions of host rock are different were chosen within the study area and the pHs of the water flowing in the valleys were measured from May, 1996 to October, 1996. The pHs of the artificial acid rain prepared by adding appropriate amounts of both sulfuric and nitric acids to distilled water were 3, 4, and 5, and the column effluents were analyzed for major cations and anions. The cation exchange capacities(CECs) of A Horizon and the B Horizon were 9.68 and 6.16 meq/100g, respectively, Compared to the B Horizon, the pH in the column effluent of A Horizon with larger CEC was higher. The sums of $Ca^{2+}$, $Mg^{2+}$, $Na^{+}$in the column effluents gradually decreased, indicating the loss of CEC by acid rain. The field study showed that pHs of the surface water in the valleys increased as the water flows downwards. The magnitude of this buffering capacity was greater for the valley in which smectite in addition to kaolinite and illite was a weathered product of host rocks. This also indicates that host rock as well as soil layer retains the buffering capacity.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.11
• /
• pp.25-37
• /
• 2014

Clay or sand does not exist alone but various sizes of soil are mixed in the field. In this study, the effect of water content on large deformation of such mixed soils is studied by using soil column tests and a particle method. A soil column with 7 cm in diameter and 13 cm in height, which was made out of kaolinite with sand content of 0, 10, 25, or 50%, was tested for large deformation. Its deformation was monitored with time. While increasing its water content from 40, 60, to 80%, a total of 12 types of soil column tests were carried out. The particle method simulated their deformation with time. A maximum plastic shear modulus, which was a function of undrained shear strength and plasticity index for soils with different water contents, was associated with soil viscosity to simulate large deformation of soil column. When a sand content of soil column was constant, the deformation of soil column increased with increasing water content. When a water content of soil column was constant, large deformation occurred with increasing the sand content. The maximum deformation, which was 22 cm in diameter, was observed in the case of water content of 80% and sand content of 50%. The particle method was able to relatively well simulate such large deformation and stress change of soils.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.215-223
• /
• 2005

Piezo-ceramics are special materials which transform energy from mechanical to electrical forms and vice versa. Bender elements are composite materials consisting of thin piezo-ceramics and elastic shims, and are widely used as actuators and transducers in the field of electronics, robotics, autos and mechatronics utilizing the effectiveness of energy transformation capability. In geotechnical engineering, commercial bender elements are used in laboratory as source and receiver in the measurements of soil stiffness. The elements were built by using various metal shims sandwiched between piezo-ceramics and coating over the composite in the research. A pair of elements were buried in a concrete block and used as source and receiver to measure the stiffness of the concrete. The test results were verified by comparing with the resonant column testing results. In a preliminary stage of the development of an in-situ seismic testing equipment using bender elements for soft clay materials, shear waves were generated and measured by burying the elements in the barrel of kaolinite and water mixture. The measured shear wave signals were so distinct for the first-arrival pick that applicability of the elements in the field measurements could be very promising.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.308-319
• /
• 2005

Piezo-ceramics are special materials which transform energy between mechanical and electrical forms. Bender-elements are composite materials consisting of thin piezo-ceramics and elastic shims, and are widely used as actuators and transducers in the field of electronics, robotics, autos and mechatronics utilizing the effectiveness of energy transformation capability. In geotechnical engineering, commercial bender-elements are used in laboratory as source and receiver in the measurements of soil stiffness. The elements were built by using various metal shims sandwiched between piezo-ceramics and coating over the composite in the research. A pair of elements were buried in a concrete block and used as source and receiver to measure the stiffness of the concrete. The test results were verified by comparing with the resonant column testing results. In a preliminary stage of the development of an in-situ seismic testing equipment using bender-elements for soft clay materials, shear waves were generated and measured by burying the elements in the barrel of kaolinite and water mixture. The measured shear wave signals were so distinct for the first-arrival pick that applicability of the elements in the field measurements is very promising.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.3
• /
• pp.162-168
• /
• 2001

This study was conducted to evaluate the degradation, adsorption and desorption and leaching of acetamiprid in soils. The half-life of acetamiprid in field condition was $1.7{\sim}3.3$ days in Bokhyun soil and, in case of laboratory condition, 15.5 days. Adsorption of acetamiprid was equilibrated in 12 hours incubation. In adsorption experiment using modified soils, such as oxidized soil, oxidized soil added humic acid, fulvic acid, kaolinite or montmorillinite, adsorption rate of acetamiprid was the highest in the oxidized soil added fulvic acid. The desorption rate was the lowest in the oxidized soil added fulvic acid. The adsorption and desorption results should be suggested that acetamiprid could be strongly adsorbed with soil humic materials, especially fulvic acid. When the mobility of acetamiprid in soil was calculated according to GUS (Groundwater Ubiquity Score) equation, it was prove to non-leacher, and it was confirmed in the leaching experiment with soil column. Most of acetamiprid was remained in the upper 30 cm of the soil column after eluting with water and it was not even detected in leachate.

• 한국해양학회지
• /
• v.29 no.1
• /
• pp.17-27
• /
• 1994

The sediment collected from KODOS91-1 were studied using X-ray diffraction(SRD) analysis to clarify the composition and vertical distribution of clay minerals. Micropaleontological data(Radiolarians) was applied to identify the changes in post-depositional environment and chemical mechanism leading to the formation of authigenic minerals. The result show that the highest concentration of smectite is occurred in the lower part(Unit II, III) of sediment column and the lowest concentration in the upper part(Unit I) whereas terrestrial minerals, such as illite, kaolinite and quartz, indicate the opposite trends. Radiolarians in the upper part are composed entirely of Quaternary/Tertiary mixtures, whereas in lower sediment units generally revealed the middle Miocene to the Eocene. This may imply that the Quaternary and Tertiary sedimentary processes were continuously affected by reworking of older sediments and subsequent resegmentation. The changes of the sediment color, peak pattern of minerals and presence of reworked microfossils at the unit boundaries have been interpreted as evidence of authigenic formation. Mineralogical characteristics of the sediments in study area strongly indicates changes in paleoenvironments through geologic time, including changes in post-depositional conditions by physical processes and chemical mechanisms.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.4
• /
• pp.5-11
• /
• 2014

Recently, there have been various lifeline installations constructed in the underground space of urban area due to the effective use of land. For newly installed lifelines or the management of the installed lifelines, many construction activities of excavation and backfilling are observed. Around these area, there are possibilities of collapse or excessive settlement due to the leaking of the pipe or unsatisfactory compaction of backfill material. Besides, construction costs can be saved since the on-site soils are used. The application of this liquidity filling material is not only to the lifeline installation but also to underpin the foundation under the vibrating machinery. On the evaluation of the applicability of this method to this circumstance, the strength should be investigated against the static load from the machine load as well as the vibration load from the activation of the machine. In this study, the applicability of the liquidity fill material on the foundation under the vibrating machinery is assessed via uniaxial compression and resonant column tests. The liquidity filling material consisting of the on-site soils with loess and kaolinite are tested to investigate the static and dynamic characteristics. Furthermore, the applicability of the reclaimed ash categorized as an industrial waste is evaluated for the recycle of the waste to the construction materials. The experimental results show that the shear modulus and 7 day uniaxial strength of the liquidity filling material mixed with reclaimed ash show higher than those with the on-site soils. However, the damping ratio does not show any tendency on the mixed materials.