• Title/Summary/Keyword: Kang Ho Boo

Search Result 107, Processing Time 0.037 seconds

Power Quality Control of Wind/Diesel Hybrid Power Systems Using Fuzzy PI Controller (퍼지 PI 제어기를 이용한 풍력/디젤 하이브리드 발전시스템의 품질제어)

  • Yang, Su-Hyung;Ko, Jung-Min;Boo, Chang-Jin;Kang, Min-Jae;Kim, Jeong-Uk;Kim, Ho-Chan
    • Journal of the Korean Solar Energy Society
    • /
    • v.32 no.5
    • /
    • pp.1-10
    • /
    • 2012
  • This paper proposes a modeling and controller design approach for a wind-diesel hybrid system including dump load. Wind turbine depends on nature such as wind speed. It causes power fluctuations of wind turbine. Excessive power fluctuation at stand-alone power grid is even worse than large-scale power grid. The proposed control scheme for power quality is fuzzy PI controller. This controller has advantages of PI and fuzzy controller. The proposed model is carried out by using Matlab/Simulink simulation program. In the simulation study, the proposed controller is compared with a conventional PI controller. Simulation results show that the proposed controller is more effective against disturbances caused by wind speed and load variation than the PI controller, and thus it contributes to a better quality wind-diesel hybrid power system.

Determining Kernel Function of Apparent Earth Resistivity Using Linearization (선형화를 이용한 대지저항률의 커널함수 결정)

  • Kang, Min-Jae;Boo, Chang-Jin;Lee, Jung-Hoon;Kim, Ho-Chan
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.22 no.4
    • /
    • pp.454-459
    • /
    • 2012
  • A kernel function of apparent earth resistivity can be estimated using the apparent earth resistivity measured with Wenner's 4 point method. It becomes to solve a nonlinear system to estimate the kernel function of apparent earth resistivity. However it is not simple to get solution of nonlinear system with many unknown variables. This paper suggests the method of estimating kernel function by linearizing this nonlinear system. Finally, various examples of earth structure have been simulated to evaluate the proposed method in this paper.

Holocene Variations of Organic Carbon Contents in Lake Langer of King George Island, South Shetland Islands, West Antarctica

  • Khim, Boo-Keun;Yoon, Ho-Il;Kang, Cheon-Yun;Zhao, Junlin
    • Ocean and Polar Research
    • /
    • v.26 no.3
    • /
    • pp.507-514
    • /
    • 2004
  • A sediment core drilled from Lake langer on King George Island was analyzed for a variety of textural md geochemical properties along with $^{14}C$ age dates. These data were combined with published records of other cores to provide a detailed history of Holocene variation of total organic carbon (TOC) contents with respect to terrestrial paleoclimate change. The lithologic contrast of the lower diamicton and upper fine-grained sediments shows the glacier activity and subsequent lake formation. Low TOC contents fluctuated during the diamicton deposition whereas the increase of TOC began with the lake formation during the postglacial period that started about 5,000 yr B.p More notable are the distinct TOC peaks that may imply enhanced primary productivity during the warm period. The uniform and low TOC contents may reflect the limited productivity during the evolution of the lake. However, the recent TOC readvance clearly indicates gradual warming on King George Island. However, the paleoclimatic signature in the terrestrial lake environment during the Holocene seems to be subtle and less distinct, compared to the marine environment.

Herd Management and Control of Dairy Cows by Milk Components in Gyeong-nam (경남지역 유우의 산유능력 검정)

  • You, Yong-sang;Kim Tae-yung;Kim Cheol-ho;Kang Chung-boo
    • Journal of Veterinary Clinics
    • /
    • v.21 no.4
    • /
    • pp.355-362
    • /
    • 2004
  • The purpose of this study was to herd management and control of dairy cows by milk components analysis in Gyeongsangnamdo. Milk components analysis were carried out milk yield (MY), milk fat (MF), milk protein (MP), milk urea nitrogen (MUN) and somatic cell count (SCC) but, milk solid (MS), day of non-pregnant condition (DNPC), and days of primipara (DPRI) involved in report. Dairy farms were divided high group, middle group, low group according to the standard records for milk components. Examination records were divided by farm, parity, year, season and month, the number of samples were 28,957. Feeding management practice and the prediction for the risk possibility of productive disease such as reproductive and metabolic disorders by evaluating fat, protein, solids. Determination of MY, MF, MP, MS were Milkoscan 4,000~5,000 Serier (FOSS Electric Co., Copenhagen, Denmark). Correlation coefficient of milk protein (MP) and milk solid (MS) was ascertain r=0.759. SCC was ascertain 372.8$\pm$11.34 (thousand unit) and DNPC was ascertain 155.3$\pm$5.15 (days) in seven parity.

Synthesis and Structure-Activity Relationship Studies of 2,3-Dihydroimidazo[2,1-a]isoquinoline Analogs as Antitumor Agents

  • Cheon, Seung-Hoon;Park, Joon-Suck;Jeong, Seon-Hee;Chung, Byung-Ho;Choi, Bo-Gil;Cho, Won-Jae;Kang, Boo-Hyon;Lee, Chong-Ock
    • Archives of Pharmacal Research
    • /
    • v.20 no.2
    • /
    • pp.138-143
    • /
    • 1997
  • 5-Aryl-2,3-dihydroimidazo[2,1-a]isoquinolines were reported to have strong antitumor activity and one of the derivatives such as $5-[4^{l}$ -(piperidinomethyl)phenyl]-2,3-dihydroimidazo[2,1-a] isoquinoline (1, SDZ 62-434) was found to be more effective than the clinical cytostatic agent edelfosine (2) in in vitro and in vivo assays. Currently SDZ 62-434 is in clinical trials in Europe. The structure-activity relationship studies of SDZ 62-434 showed that compounds with substitution on ring A were less active than the lead compound. Ring B in SDZ 62-434 was essential for the activity because compounds without B ring had no antitumor activity. Among the 3-arylisoquinolin-1-one derivatives, $3-[4^{I}$-(piperidinomethyl)phenyl] substituted analog had no antitumor activity but simple phenyl substituted compound, such as 4, showed the most potent antitumor activity in various human tumor cell lines.

  • PDF

A Novel Vertical Directional Coupler Switch with Switching Operation-Induced, Extinction Ratio-Adjusted, and Extinction Ratio-Enhanced Sections

  • Cho, Sung-Chan;Hong, Hyun-Ha;Yang, Choong-Reol;Choi, Jee-Yon;Kang, Min-Ho;Hwang, Hyun-Yong;Choi, Young-Woo;Kim, Hae-Geun;Jung, Byung-Min;Kim, Boo-Gyoun
    • ETRI Journal
    • /
    • v.24 no.2
    • /
    • pp.109-116
    • /
    • 2002
  • We propose a novel very short (< $300{\mu}m$) vertical directional coupler switch with high extinction ratios larger than 30 dB. The device consists of a switching operation induced section (SOIS), an extinction ratio adjusted section (ERAS), and an extinction ratio enhanced section (ERES). These are achieved by changing the refractive index of one core. The switching operation is induced by changing the refractive index of one core in the SOIS. The improvement of extinction ratios larger than 30 dB for both the cross and bar states is made by controlling the asymmetry of the refractive indices of both cores in the ERES. Through the ERAS, different extinction ratios between the cross and bar states at the end of the SOIS are changed to the same value. For this reason, the optimum asymmetry of the refractive indices of the cores for the maximum extinction ratios and the lengths of ERES are the same for cross and bar states. Design guidelines for high extinction ratios with large tolerances are presented.

  • PDF

Sweet Spot Search of Antenna Beam using The Two ADALINE (두개의 ADALINE을 이용한 안테나 빔의 스위트 스폿 탐색)

  • Lee, Chang-Young;Choi, Kyu-Min;Kang, Seong-Ho;Chung, Sung-Boo;Eom, Ki-Hwan
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • v.9 no.1
    • /
    • pp.705-708
    • /
    • 2005
  • In this paper, we propose a method that search the sweet spot of antenna beam, and keep it for fast speed transmission in millimeter wave on point-to-point link We use TDD(Time Division Duplex) as transfer method, and it transfers the control data of antenna. The proposed method is composed of two ADALINE which used the parallel. The efficiency of the proposed method is verified by means of simulations with white Gaussian noise and not on point-to-point link.

  • PDF

Experimental application of drone imagery for estimating streamflow based on remote sensing (원격탐사기반 하천유량추정을 위한 드론영상의 실험적 활용)

  • Kim, Jin Gyeom;Kang, Boo Sik;Kim, Dong Su;You, Ho Jun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.496-496
    • /
    • 2017
  • 위성을 이용한 원격탐사 기술이 발전하고 다양한 산출물이 나타남에 따라 수자원 및 하천관리에서의 원격탐사기술의 활용의 폭이 넓어지고 있다. 특히, 위성에서 관측할 수 있는 다양한 정보들을 이용하여 수자원 및 하천관리에 사용하려하는 연구가 활발히 진행되고 있으며, 기본적인 가시영상 이외에도 적외영상, 초분광영상, 수위정보, 레이더 반사도 등을 활용하여 수문량을 추정하려는 시도가 이루어져왔다. 원격탐사의 대표적인 장비인 위성은 광범위한 정보를 쉽게 취득할 수 있지만 위성마다 탑재된 센서에 따라 획득할 수 있는 자료가 서로 다르고, 산출물의 시공간 해상도에 따라 자료의 질이 결정된다. 본 연구에서는 원격탐사영상을 이용한 하천유량추정기법을 수립하기 위해 통제된 실험하천 규모에서 드론을 이용하였다. 실험은 대한민국 안동에 위치한 한국건설기술연구원 하천실험센터에서 수행되었으며, DJI Phantom 3 standard 드론을 활용하여 영상을 획득하였다. 하천유량추정의 방법론은 운동량 방정식과 Manning 유속공식을 활용한 하폭기반 유량추정 기법을 수립하였다. 1차 실험은 하천유량을 증가시키고 감소시키는 동시에 드론을 이용하여 하천을 촬영함으로써 하폭의 변화와 동시에 유량의 변화를 추정할 수 있는지 확인하였다. 2차 실험에서는 배수효과가 존재하는 조건에서 드론영상을 이용한 하천유량을 산정하고 보정계수를 산정하였다. 본 연구에서 수립된 하천유량추정기법은 위성영상을 이용한 하천유량 추정에 활용할 수 있으리라 기대한다.

  • PDF

Apparent Soil Resistivity Calculation Using Complex Image Method (복소수이미지 방법을 이용한 겉보기 대지저항률 계산)

  • Kim, Ho-Chan;Boo, Chang-Jin;Kang, Min-Jae
    • Journal of IKEEE
    • /
    • v.23 no.1
    • /
    • pp.318-321
    • /
    • 2019
  • The apparent soil resistivity is used for estimating multilayer soil parameters, such as, layer's depth and soil resistivity. The apparent soil resistivity can be measured, and also can be calculated if soil parameters are given, becacuse the apparent soil resistivity is a function of these parameters. Therefore, any optimization algorithms can be used to find these parameters which make the calculated apparent soil resistivity close to the measured one. The equation for calculating the apparent soil resistivity is complicated and time consumed, because it is composed of an infinite integral which includes a zero order Bessel's function of the first kind. In this paper, a fast algorithm for calculating the apparent soil resistivity of horizontal multilayer earth structure has been presented using complex image method.

Stress analysis on the implant fixture with the angulated placement (경사진 임플란트 고정체의 응력 분석)

  • Kim, Chang-Hyeon;Kang, Jae-Suek;Boo, Soo-Bung;Oh, Snag-Ho;An, OK-Ju;Kang, Dong-Wan
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.20 no.2
    • /
    • pp.71-81
    • /
    • 2004
  • The purpose of this study was to compare the distributing pattern of stress on the finite element models of two units implant prosthesis with one angulated placement of two implant fixtures. The two unit implant crowns simulated to mandibular first and second molars were made. The two kinds of finite element models were designed according to angulation of fixture ($4.0mm{\times}11.5mm$) : Model 1($15^{\circ}$ buccally angulated placement of one fixture on second molar area), Model 2($15^{\circ}$ lingually angulated placement of one fixture on second molar area). Axial loads of 200N were applied to the center of central fossa and to distance of 2mm and 4mm apart from the center of central fossa. Von-Mises stresses were recorded and compared in the fixtures, and buccolingual section of implants. The results were as follows: 1. Under axial loading at the central fossa, the stress was distributed along the straight fixture except apical portion, while on buccally or lingually angulated placement, the highest stresses were concentrated in the neck portion on the opposite side of the angulated fixture. 2. With offset distance increasing, the stresses were concentrated greater in buccal neck of lingually angulated fixture than in lingual neck of buccally angulated fixture. From the above results, in designing of the occlusal scheme for implant prosthesis with the angulated fixture, occlusal contacts should be placed to distribute stress axially in maximum intercuspation and to avoid offset force during eccentric movements.