• 제목/요약/키워드: Kane

검색결과 46건 처리시간 0.019초

Maximizing Concurrency and Analyzable Timing Behavior in Component-Oriented Real-Time Distributed Computing Application Systems

  • Kim, Kwang-Hee Kane;Colmenares, Juan A.
    • Journal of Computing Science and Engineering
    • /
    • 제1권1호
    • /
    • pp.56-73
    • /
    • 2007
  • Demands have been growing in safety-critical application fields for producing networked real-time embedded computing (NREC) systems together with acceptable assurances of tight service time bounds (STBs). Here a service time can be defined as the amount of time that the NREC system could take in accepting a request, executing an appropriate service method, and returning a valid result. Enabling systematic composition of large-scale NREC systems with STB certifications has been recognized as a highly desirable goal by the research community for many years. An appealing approach for pursuing such a goal is to establish a hard-real-time (HRT) component model that contains its own STB as an integral part. The TMO (Time-Triggered Message-Triggered Object) programming scheme is one HRT distributed computing (DC) component model established by the first co-author and his collaborators over the past 15 years. The TMO programming scheme has been intended to be an advanced high-level RT DC programming scheme that enables development of NREC systems and validation of tight STBs of such systems with efforts far smaller than those required when any existing lower-level RT DC programming scheme is used. An additional goal is to enable maximum exploitation of concurrency without damaging any major structuring and execution approaches adopted for meeting the first two goals. A number of previously untried program structuring approaches and execution rules were adopted from the early development stage of the TMO scheme. This paper presents new concrete justifications for those approaches and rules, and also discusses new extensions of the TMO scheme intended to enable further exploitation of concurrency in NREC system design and programming.

관절 질환의 통증과 가동력에 파라핀 치료가 미치는 효과 (The Effect of Paraffin Therapy on Release of pain and Range of motion with Joint Disease Patients)

  • 이석민;권기자
    • 대한물리치료과학회지
    • /
    • 제10권1호
    • /
    • pp.130-139
    • /
    • 2003
  • This study was conducted in order to determine the effect of Paraffin Therapy on release of pain, skin temperature and range of motion with joint diseases. This study was performed on 42 patients with general joint diseases and 21 patients with degenerative joint diseases. All the subjects were randomly assigned to three groups with 21 each. The experiment had been done from June, 1. 2002 to September, 30. 2002, in two general hospitals and a social welfare center using Digital Thermometer Kane-May KM330 and VAS(visual analogue scale). Each pint was measured in terms of skin temperature, pain scale and ROM(range of motion). The results of the experiment are as follows : 1. In application of three different heat modalities (Paraffin bath, Infra red, Hydro pack) on the Knee, Ankle, Elbow pints of the subjects for 30 minutes, the elevation of skin temperature and the reduction of pain scale were found to be significantly different. When checked right after the 30 minutes' application, the Infra red resulted in a higher degree elevation of skin temperature than two other modalities, while Paraffin bath resulted in the highest degree of the elevation of skin temperature when it was checked one hour after the application was over. It means that Paraffin bath lasted longer than the other two modalities(F=14.691, p<.000). 2. With Paraffin bath application, pint pain was reduced significantly both in 30 minutes and one hour checks(F=20.675, p<.001). 3. In terms of ROM(range of motion) increase, didn't seem to have any significant differences in 30 minutes and one hour. The results suggest that Paraffin therapy be helpful in maximizing th effects on pint diseases. I strongly suggest that further studies be done on other pints and muscle diseases using Paraffin bath in different methods of applying the therapy.

  • PDF

Stress concentrations around a circular hole in an infinite plate of arbitrary thickness

  • Dai, Longchao;Wang, Xinwei;Liu, Feng
    • Structural Engineering and Mechanics
    • /
    • 제34권2호
    • /
    • pp.143-157
    • /
    • 2010
  • This paper presents theoretical solutions for the three-dimensional (3D) stress field in an infinite isotropic elastic plate containing a through-the-thickness circular hole subjected to far-field in-plane loads by using Kane and Mindlin's assumption. The dangerous position, where the premature fracture or failure of the plate will take place, the expressions of the tangential stress at the surface of the hole and the out-of-plane stress constraint factor are found in a concise, explicit form. Based on the present theoretical solutions, a comprehensive analysis is performed on the deviated degree of the in-plane stresses from the related plane stress solutions, stress concentration and out-of-plane constraint, and the emphasis has been placed on the effects of the plate thickness, Poisson's ratio and the far-field in-plane loads on the stress field. The analytical solution shows that the effects of the plate thickness and Poisson's ratio on the deviation of the 3D in-plane stress components is obvious and could not be ignored, although their effects on distributions of the in-plane stress components are slight, and that the effect of the far-field in-plane loads is just on the contrary of that of the above two. When only the shear stress is loaded at far field, the stress concentration factor reach its peak value about 8.9% higher than that of the plane stress solutions, and the out-of-plane stress constraint factor can reach 1 at the surface of the hole and is the biggest among all cases considered.

크리핑 벤트그래스 그린에서 동전마름병 방제 (Fungicides for Dollar Spot Suppression on Creeping Bentgrass Greens)

  • 데릭셋트;이상국;랜디케인
    • 아시안잔디학회지
    • /
    • 제25권1호
    • /
    • pp.43-47
    • /
    • 2011
  • 크리핑 벤트그래스는 골프장의 그린과 페어웨이에서 가장 널리 이용되는 종중의 하나이다. 크리핑벤트그래스는 곰팡이병류인 동전마름병에 가장 취약한 종이며 동전마름병은 잔디의 잎에서 그 병반이 나타나며 높은 습도와 낮의 온도 그리고 비교적 낮은 밤의 온도에서 발병률이 더 높은 것으로 알려져 있다. 곰팡이 병균류를 제어하기 위한 약제들에 관한 이전의 연구에서는 혼합된 약제에 의해 관리된 잔디는 단일품에 의해 관리된 잔디에 비해 더 좋은 잔디의 질을 나타내지 못했다. 이 부분에 대한 정확한 원인이 규명이 되지 않았으며 비료프로그램과 환경에 의한 영향이 약제의 사용과 잔디의 질을 나타낸다는 보고가 있다. 본 연구에서는 잔디의 질병이 가장 많이 발생하고 고온다습한 여름철에 골프코스 그린에서 발생하는 동전마름병의 방제 할 수 있는 약제프로그램과 잔디의 품질에 대한 영향을 규명하기 위해 수행되었다. 총 9가지 약제조합이 이 연구에서 사용이 되었다. 동전마름병에 의한 피해와 잔디의 품질이 G-2/L-93 혼합된 크리핑벤트그래스 그런에서 측정이 되었다. Fore를 제외한 모든 조합이 동전마름병의 방제에 좋은 결과를 보여 주었다. Fore의 경우 동전마름병의 피해가 30%까지 나타났으며 대조군과 차이가 나타나지 않았다. Fore의 낮은 잔디품질은 동전마름병의 방제가 잘 이루어지지 않았기 때문으로 나타났다.

개념도를 통한 유아 인성교육에 대한 교사 인식 연구 (Study on Teachers' Perception on Child's Personality Education Using Concept Mapping)

  • 박진희;손원경
    • 한국보육지원학회지
    • /
    • 제10권5호
    • /
    • pp.191-209
    • /
    • 2014
  • 본 연구는 유아 인성교육에 대한 교사들의 인식을 Kane과 Trochim(2007)의 개념도 방법을 활용하여 밝히고, 그 중요도를 알아보는 데 목적이 있다. 이를 위해 부산광역시에 소재한 유아교육기관에 근무하고 있는 교사 10명을 대상으로 면접을 실시하여 총 196개의 아이디어 진술문이 수집되었으며, 추출된 아이디어 진술문을 통합 편집하는 과정을 거쳐 최종적으로 51개의 진술문으로 축약하였다. 최종 진술문은 다시 10명의 개념도 작성 참여자들에게 분류하도록 하고, 설문조사 참여자 294명에게 각 진술문의 중요도에 관해 평정하는 과정을 거쳤다. 연구결과 첫째, 분류 결과를 토대로 다차원 척도 분석과 위계적 군집분석을 이용하여 2개 차원(환경/개인, 덕목/실행)과 5개 군집으로 이루어진 유아 인성교육에 대한 교사들의 인식 개념도를 도출할 수 있었다. 둘째, 유아 인성교육에 대한 교사들의 중요도 인식을 평정한 결과 유아 인성교육 관련 5개 범주 중 '성인의 역할 강조(M=4.45)'를 가장 중요하게 인식하고 있음을 알 수 있었다.

분산 환경에서 LTMOS의 TMO 리플리카를 이용한 실시간 로드 밸런싱의 설계 및 구현 (Design And Implementation Real-Time Load Balancing Using TMO Replica Of LTMOS In Distributed Environment)

  • 주군호;임보섭;허신;김정국
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2005년도 한국컴퓨터종합학술대회 논문집 Vol.32 No.1 (A)
    • /
    • pp.829-831
    • /
    • 2005
  • 실시간 시스템이란 시간적인 제한을 가지고 작업 수행 결과의 정확도가 보장되는 시스템으로 경성 실시간 시스템과 연성 실시간 시스템으로 분류된다. 최근 분산 실시간 분야에서 새로운 패러다임으로써 폭넓게 활용되기 시작한 실시간 객체 모델인 TMO는 Kane Kim과 Kopetz에 의해 처음 제안되었다. TMO 모델은 경성 또는 연성 실시간 응용과 병렬 컴퓨팅 응용 프로그램에서 사용 될 수 있으며, 시스템의 기능적인 면과 시간 조건 수행 모두를 명확히 정의할 수 있다. TMO의 네트워크로 구성되는 실시간 분산 환경에서의 실행을 위해 몇 개의 TMO 실행 엔진이 개발 되었는데, 그 중에서 LTMOS라는 리눅스 기반의 연성 실시간 미들웨어 엔진이 한국외대 RTDCS lab.에서 개발되었다. 하지만 LTMOS의 실시간 시스템 수행 중 작업량의 과부하로 인한 deadline 위반이나, 시스템간의 분산 IPC 통신에 있어서 Channel Traffic이 빈번한 경우 실시간 시스템을 유지할 수 없다는 문제점들을 갖고 있다. 이러한 문제점들을 해결하고 조금 더 효율적인 실시간 시스템을 유지하기 위해서, TMO 프로그램의 resource 정보를 담고 있는 ODS(Object Data Store)만을 다른 노드에 있는 자신의 TMO 프로그램 Replica로 이주해서 실시간 로드 밸런싱을 구현하는 기법을 사용하였다. 이에 본 논문에서는 TMO 프로그램들의 deadline 위반 및 Channel Traffic 부하를 감지할 수 있는 Node Monitor와 최적의 노드를 선별할 수 있는 Migration Manager를 새롭게 추가하였고, 쓰레드들의 스케줄러인 WRMT에 이주 작업을 하기 위한 부가적인 기능을 구현하였다. 2D 이미지의 관측점을 줄여 계산량을 대폭 감소시키는 장점을 갖는다.것으로 조사되었으며 40대 이상의 연령층은 점심비용으로 더 많은 지출을 하고 있는 것으로 나타났다. 4) 끼니별 한식에 대한 선호도는 아침식사의 경우가 가장 높았으며, 이는 40대와 50대에서 높게 나타났다. 점심 식사로 가장 선호되는 음식은 중식, 일식이었으며 저녁 식사에서 가장 선호되는 메뉴는 전 연령층에서 일식, 분식류 이었으며, 한식에 대한 선택 정도는 전 연령층에서 매우 낮게 나타났다. 5) 각 연령층에서 선호하는 한식에 대한 조사에서는 된장찌개가 전 연령층에서 가장 높은 선호도를 나타내었고, 김치는 40대 이상의 선호도가 30대보다 높게 나타났으며, 흥미롭게도 30세 이하의 선호도는 30대보다 높게 나타났다. 그 외에도 떡과 죽에 대한 선호도는 전 연령층에서 낮게 조사되었다. 장아찌류의 선호도는 전 연령대에서 낮았으며 특히 30세 이하에서 매우 낮게 조사되었다. 한식의 맛에 대한 만족도 조사에서는 연령이 올라갈수록 한식의 맛에 대한 만족도는 낮아지고 있었으나, 한식의 맛에 대한 만족도가 높을수록 양과 가격에 대한 만족도는 높은 경향을 나타내었다. 전반적으로 한식에 대한 선호도는 식사 때와 식사 목적에 따라 연령대 별로 다르게 나타나고 있으나, 선호도는 성별이나 세대에 관계없이 폭 넓은 선호도를 반영하고 있으며, 이는 대학생들을 대상으로 하는 연구 등에서도 나타난바 같다. 주 5일 근무제의 확산과 초 중 고생들의 토요일 휴무와 더불어 여행과 엔터테인먼트산업은 더욱 더 발전을 거듭하고 있으며, 외식은 여행과 여가 활동의 필수적인 요소로써 그 역할을 일조하고 있다. 이와 같은 여가시간의 증가는 독신자들에게는 좀더 많은 여유시간을 가족을

  • PDF