• Journal of computational fluids engineering
• /
• v.10 no.1
• /
• pp.31-38
• /
• 2005

Three-dimensional flow over the sand dunes have been studied numerically by using Large-Eddy Simulation (LES) method. In the direction of initial flow and span direction cyclic boundary conditions are imposed for velocity and pressure. The movement of the sand dune which is formed by converging wind direction has been investigated. The numerical method employed in this study can be divided into three parts: (i) calculation of the air flow over the sand dune using standard MAC method with a generalized coordinate system; (ii) estimation of the sand transfer caused by the flow through the friction; (iii) determination of the shape of the sand surface. Since the computational area has been changed due to step (iii), (i)-(iii) are repeated. The simulated dune, which has initially elliptic cross section, extends at the converging direction, which is known as linear dunes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.2
• /
• pp.130-135
• /
• 2015

Recently, as a result of the application of large and multi-blade propellers with high efficiency for large vessels, the vertical bending stiffness of propulsion shafting system tends to be declined. For some specific vessels, the shaft arrangement leads to the forward stern tube bearing to be omitted, decreasing vertical bending stiffness. In this respect, decreased vertical bending stiffness causes the problem which is the blade order resonance frequency to be placed within the operational rpm range of propulsion shafting system. To verify whirling vibration, the measurement should be carried out covering from operating rpm up to target rpm, however, the range is un-measurable generally. In order to resolve the measurement issue, this study shows the measuring method and the assessment method of relevant natural frequency of whiling vibration by using measured harmonic order component of whirling vibration.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.7
• /
• pp.694-700
• /
• 2013

The design of the exhaust manifold for the pulse converters of a 4 strokes high power medium-speed diesel engine is presented in terms of fatigue analysis. The said system undergoes thermal expansion due to high temperature of exhaust gas and is exposed to intrinsic vibration of the internal combustion engine. Moreover, the exhaust pulse generates pressure pulsating along the runner inside manifold. Under such circumstances, the design and construction of exhaust manifold must be carried out in a way to prevent early failure due to fracture. To validate the design concept, a test rig was developed to simulate the combination of thermal and vibrational movements, simultaneously. Experimental results showed that a certain sense of reliability can be achieved by considering a field factor obtained from the results of engine bench tests.

• Journal of Pharmaceutical Investigation
• /
• v.11 no.3
• /
• pp.1-13
• /
• 1981

A new application of monoacidic dye is reported for the determination of pipethanate hydrochloride(PTH). The method is based on solvent extraction into chloroform of an ion-pair compound formed between methyl orange(MO) and PTH. PTH is determined by measuring absorbance of the extracts over the range of $2.0{\sim}12.0{\mu}g/ml$ at 420nm. Best accuracy can be obtained for solutions containing $3.0{\sim}8.0{\mu}g/ml$. The color was stable for at least 5 days. The molar absorptivity was $2.88\;{\times}\;10^4\;l,\;mol^{-1},\;cm^{-1}$. Molar ratio and continuous variation plots have a maximum at 0.5 mol fraction of MO, indicating a 1 : 1 MO-PTH ratio.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.10 no.2
• /
• pp.129-132
• /
• 2011

A complete rupture of hamstring tendon originated from ischial tuberosity is a uncommon sports injury in adults. We present successful outcome obtained by attachment on ischial tuberosity using suture anchor in relatively rare case of the proximal rupture of the medial hamstring tendon sustained during landing with the review of literatures.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.129-129
• /
• 2006

Conventional solvent-based polyurethane (PU) is well established for wide applications, such as textile treatments, surface coating, adhesive and so on. Due to the demands of safety, economic, and environmental protection, the solvent-based PU is restricted and has been phasing out and aqueous-based PU is becoming the world market trend, which is an environmental friendly product. The chemical resistance, physical and mechanical properties of aqueous-based PU are still not competible with solvent-based PU. Because of aqueous-based PU is a linear thermoplastic polymer with lower average molecular weight. Their improvements are normally performed by a post-curing reaction or a polymer hybridization to enhance the polymer cross-linking density. Hybridization of PU with aqueous-based epoxy resin or acrylate emulsion and then cured by a curing agent for improving the performance properties and reducing the cost of aqueous-based PU.Furthermore, a special function is added to aqueous-based PU increasing the application value, for examples, flame retardation, polymeric dyes, hydrophilic and etc.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1347-1354
• /
• 2020

To improve the efficiency of MC criticality calculation, an acceleration method of fission source convergence which gives an improved initial fission source is proposed. In this method, the MC global homogenization is carried out to obtain the macroscopic cross section of each material mesh, and then the nonlinear iterative solution of the SP3 equations is used to determine the fission source distribution. The calculated fission source is very close to the real fission source, which describes its space and energy distribution. This method is an automatic computation process and is tested by the C5G7 benchmark, the results show that this acceleration method is helpful to reduce the inactive cycles and overall running time.

• Journal of the Korean housing association
• /
• v.12 no.1
• /
• pp.77-83
• /
• 2001

This study is the seventh of series that have been interpreted as the view of regionalism for the block plans and floor plans of the traditional houses spreaded in Kyoung-Sang-Buck-Do Privince, and is investigated its subject in Sung-ju area. The purpose of study is to be analyzed the block types of the houses and the floor plans of An-chae(ladys inner house) and declared the typical case on the characteristics on each housing elements to Buk-Bi-Go-Teak on the conclusion. The block plan of the high-leveled traditional houses in Sung-ju area is typically the courtyard type that is opening at sides that 3 to 5 of I-shaped or L-shaped buildings are composed. The floor plan of An-chae is mostly typed I-shaped and its bay system is semi-lineal type(Teo-Kan-Gip).

• Fibers and Polymers
• /
• v.5 no.1
• /
• pp.52-58
• /
• 2004

Previous investigation results revealed that after the Low Temperature Plasma (LTP) treatment, the hydrophilicity of wool fiber was improved significantly. Such improvement enhances the wool dyeing and finishing processes which might be due to the changes of the wool surface to a more reactive one. In this paper, wool fibers were treated with LTP with different gases, namely, oxygen, nitrogen and gas mixture (25 % hydrogen/75 % nitrogen). Investigations showed that chemical composition of wool fiber surface varied differently with the different plasma gas used. The surface chemical composition of the different LTP-treated wool fibers was evaluated with different characterization methods, namely FTIR-ATR, XPS and saturated adsorption value. The experimental results were thoroughly discussed.

• Fibers and Polymers
• /
• v.5 no.2
• /
• pp.117-121
• /
• 2004

Optimum condition concerning the content of pretreatment print paste and steaming time for ink-jet printing was newly developed through the orthogonal analysis. The cotton fabric treated under the newly developed optimum condition could achieve a high level of colour yield similar to that of the commercially pretreated cotton fabric available in the market for ink-jet printing. The results were discussed thoroughly in this paper.