• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.437-440
• /
• 2003

This study has focused on the possibility for recycling of tailings from the Sangdong tungsten mine as powder of self-compacting concrete(SCC). The experimental tests for slump-flow, reaching time to the slump-flow of 500mm, V-funnel and U-box were carried out in accordance with the specified by the Japanese Society of Civil Engineering(JSCE). The result of this study, in case of SCC mixed with tailings, slump-flow was decreased with increasing mixing ratio. But reaching time slump-flow of 500mm, V-funnel and U-box were satisfied a prescribed range. The mechanical properties including compressive strength, splitting tensile strength and static modulus of elasticity were checked with the requirements specified by Korean Industrial Standard(KS). The compressive strength of SCC was decreased with increasing replacement, splitting tensile strength and static modulus were similar to those of normal concrete.

• 대한인간공학회지
• /
• 제11권1호
• /
• pp.49-65
• /
• 1992

The study has been carried out in four ways to find out the fit of the present size speces of the garments for middle aged woman. For this purpose, surveys, classifying the trunk form of middle aged woman by factor analysis and clustering, calculating coverage rate of one garment item(suit) has been used. The results are as follows: (1) In case of the survey for middle aged women, the problems concerning the length of sleeves or trousers and hip girth are found. The former too long and the latter too tight. (2) The size classification and the standard deviation for each sizes are very diffenent between 9 ready-made-garment makers. (3) In classifying the trunk forms of the middle aged women, the diversity of the trunk forms are examined. (4) In calculating coverage rates of the 5 maker's size spece, those similar to KS sizing system are the highest. The coverage rate of the smallest size is the higest, while that of the biggest is 0%.

• 펄프종이기술
• /
• 제43권3호
• /
• pp.80-87
• /
• 2011

This research was performed to investigate the physical and mechanical properties of Chanhoji manufactured with the traditional method. This research would provide a basic information for its application in the manufacture of Korean-style house. A piece of Changhoji was manufactured to have a weight of 3.75 g. The weight was increased with the basic weight and no increase was not found on its density. The strength properties of Changhoji are superior to a copying paper, and the quality showed the first grade in Korean Standard (KS M 7301). The air resistance varied with the thickness from 2 to 19 seconds, but it showed better performance than a copying paper having 38 seconds. This research would be used for the practical use in understanding the ventilation and lightening properties of windows and doors in Korean-style house.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2005년도 추계학술발표논문집
• /
• pp.187-196
• /
• 2005

Newsprint is quantitatively the most important printing paper. The demands for its printability are continuously increasing. It is well known that the relationship between the physically tested paper properties and newspaper printability is unsatisfactory. In order to improve the printing quality of Korean newsprint, the printability coefficients such as maximum ink requirement($Y_{max}$), print through were investigated. Kinds of Korean newspapers and three kinds of news printing inks were tested by IGT printability tester. Experiment condition of IGT printability tester was 14 steps between $0.2{\sim}2.8g/m^2$ of ink requirement, printing pressure was .200 N and printing velocity was 1m/sec. The properties of newspaper samples(basis weight, bulk density, roughness, smoothness, porosity, i. e.) were examined in accordance with KS and TAPPI standard testing methods. The result of this study are respected for usefulness printing quality management of Korean newsprint.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.145-148
• /
• 2005

Recently, because of the increase of management system about waste concrete and the policy of recycling promotion of government, the use of recycled aggregate is rapidly increasing nowadays. But, due to the poverty of quality and the lack of KS standard, the use of recycled fine aggregate is not active. Therefore, it was intended to compare and investigate effects which types of sand and replacement ratio of recycled fine aggregate. As the result of this study, in the case of the recycled replacement ratio of 25$\%$, fresh and engineering properties were higher than those of natural fing aggregates with the exception of durability. Also, because quality according to types of fine aggregate shows the difference between various properties, it was considered that the profound study for this result would be necessary.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.389-392
• /
• 2005

In this study, the effect of thickness of sprayed fireproofing on temperature of main bars under fire test was investigated for high strength concrete member(column) prevented the spalling. The thicknesses of sprayed fireproofing were 0, 10, 20 and 30mm. Test was carried out according to ISO-KS standard temperature-time curve during 3hrs. Based on temperature results of main bars after 3hrs, it appears that the temperatures of the main coner bar are about 400$^{circ}C$ and 500$^{circ}C$, when the thicknesses of sprayed fireproofing are 5mm and 2mm, respectively.

• 한국가스학회지
• /
• 제20권5호
• /
• pp.112-117
• /
• 2016

국내에서는 연료 가스 배관용 탄소강관으로 KS D 3631의 기준을 따르도록 되어있으며, 탄소강관이 지하에 매설되는 경우 부식을 방지하기 위해 강관에 합성수지로 피복을 한다. 피복은 부식 방지 조치를 하는 것으로 압축된 연료가스를 이송하는데 필요한 강도는 원관인 탄소강관이 그 역할을 수행한다. 따라서 탄소강관에 결함이 발생하였을 때, 그 결함에 따른 강도를 평가하는 것이 중요한데 국내에는 잔존강도를 평가하기 위한 방법이 부족하다. 결국 국외 기준인 DNV RP F101 또는 ASME B31G의 기준에 따라 잔존강도를 평가하는데, 그 결과가 국내 배관에 적용 타당성이 있는지 검증이 부족하며, 85% 이상의 결함에 대해서는 예측 할 수 없다. 따라서 본 연구에서는 KS D 3631의 배관을 이용하여 인위적 결함을 가공하여 잔존강도를 평가하기 위한 실험을 수행하였다. 그 결과 폭에 따라서 일정한 잔존강도의 차이를 보이며, 국내 연료 가스용 배관에는 DNV RP F101이 적합하다는 결론을 도출하였다. 본 연구의 결과는 결함 깊이가 큰 경우에 대한 결과와 타당한 국의 기준을 파악하기 위한 결과를 포함하고 있어, 배관의 잔존강도를 이용한 위험성 평가 등에 유용하게 활용될 것으로 기대한다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제16권1호
• /
• pp.65-75
• /
• 2010

This is a comparative study mainly on foreign countries' domestic standards and laws on barrier free housing construction that can be applied to the dwelling of elderly friendly apartment housing. Eight countries - the United States, Germany, Canada, Switzerland, the United Kingdom, Australia, Japan, and China - were reviewed as foreign cases. The analyzed subjects were design standards only for the disabled and the aged. To compare barrier-free guides of the eight countries, each barrier-free guide on three space units (entrance, bedroom, living room) was divided into 11 design items and 36 design factors. The comparative analysis on foreign cases was based on the design guide according to Korea's KS P 1509 (principle and recommendation for designing dimension of dwelling in consideration of the elderly). Some factors -if with dimensions- were compared by means of the skewness of distribution. In the analysis result, there were not only common standards for the nine countries such as a dimension of the space for wheelchair movement but also different standards such as heights of outlets and horizontal lengths of bathtub grab bars. The detailed analysis shows that it is urgently necessary to prepare new domestic national design standards for 8 factors that foreign countries already have. It is also needed to immediately prepare dimension standards for the design factors, which have no detailed dimensions but only national guides, in consideration for anthropometric dimension.

• 한국건설순환자원학회논문집
• /
• 제4권2호
• /
• pp.112-117
• /
• 2016

본 연구에서는 급속히 성장하고 있는 산업분야인 생분해성 플라스틱인 PLA(Poly Lactic Acid)를 사용하여 개발된 식생매트의 생분해기간에 따른 인장성능을 비교하였다. 시험방법은 한국산업표준(KS)에서 정한 방법을 준용하였다. 단일소재로 제작된 PLA 매쉬 및 PLA 플라스틱으로 실험한 두꼐, 인장강도 및 분자량은 5개월 생분해 기간에 반비례하는 결과를 나타내었다. PLA 매쉬의 두께는 11.2%~13.4% 수준까지 두께가 증가하였으며 PLA 매쉬의 인장강도는 32.4%~55.4% 수준까지 감소하였다. PLA 플라스틱의 인장강도 및 분자량도 시간경과에 따라 감소하는 것을 확인할 수 있었다. 다만, PLA 매쉬, 부직포(씨앗포함) 및 황마네트로 혼합 구성된 식생매트의 인장시험결과는 특정한 경향성을 보이지 못하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권1호
• /
• pp.123-130
• /
• 2006

콘크리트의 열화 및 철근부식에 대응하기 위하여 다양한 보수재료가 존재하나 이러한 보수재료를 평가하는 방법은 단순히 염해, 중성화 등의 단독열화만을 대상으로 하고 있어 여러 가지 열화인자가 복합적으로 작용하는 실제 환경과는 차이를 나타내게 된다. 따라서 본 연구에서는 폴리머시멘트계 보수용 단면복구재가 KS 기준을 만족하는지 확인한 후 복합열화 환경 하에서 염해, 중성화. 철근부식을 평가하였다. 실험결과 각각의 보수재료들은 KS 기준을 만족하였지만 내구성능은 상이하게 나타나 향후 이에 대한 고려가 필요할 것으로 사료된다.