• Journal of Ginseng Research
• /
• v.33 no.1
• /
• pp.8-12
• /
• 2009

A simple gradient HPLC method for rapid determination of major ginsenosides ($Rg_1$ and $Rb_1$) and unique ginsenoside (Rf) of Korean ginseng (Panax ginseng C.A. Meyer) was developed. Within 50min, three ginsenosides have been separated and identified on $\mu$-Bondapak $C_{18}$ column ($3.9{\times}300\;mm$, $10{\mu}m$) with gradient elution using water and acetonitrile as a mobile phase. The method was validated in terms of linearity, accuracy, and precision. The correlation coefficients ($r^2$) for calibration curves of ginsenosides were over 0.9997. The developed HPLC method was successfully applied to the analysis of ginseng samples and the recoveries of ginsenosides were in the range of $101.1{\sim}115%$ with RSD<3.2%. The developed method could be used for rapid evaluation of the ginsenosides $Rg_1$, $Rb_1$, and Rf.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.14-24
• /
• 2010

Although the existing X-CASH card system observes the KS standard for a transportation card system, there has been an issue for interoperability between X-CASH and other public transportation system due to the partially undefined part in the standard. This issue is followed by the inconvenience of the existing X-CASH users. If the existing X-CASH card user wants to get any other public transportations which are not interoperated with X-CASH, the user would have to buy other cards. Consequently, some users have to bring more than one card with them. In addition, it is almost impossible that the existing X-CASH system operator makes the X-CASH card available for the infrastructure built by other cards operators because their technologies are too much different. The X-CASH operator must construct its own infrastructure on the same route and it would cause an unnecessary loss of expense and labor. To solve these problems, We modified the existing X-CASH system and developed the Nation-wide Interoerable X-CASH system which lets both the existing X-CASH card and Nation-wide Interoperable X-CASH card work. This developed X-CASH system consists of the purchase SAM, the purchase terminal and the settlement. And The conformity test for it was successfully authorized. Also we, KORAIL NETWORKS, have done the test-bed on this Nation-wide interoperable X-CASH system in Gwangju for six months with Telecommunications & Clearings, the HiPlusCard Corporation. This test confirmed that the Nation-wide Interoperable X-CASH system would practically work well.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.3
• /
• pp.281-289
• /
• 2024

In this study, CO₂-immobilized desulfurized gypsum(CFDG) was applied to ground granulated blast furnace slag to examine the basic properties of mortar and concrete, and to evaluate its responsiveness through field demonstration test. CFDG had a relatively circular composition compared to desulfurized gypsum(DG), and its main components were CaO 47.6 % and SO₃ 22.1 %. As a result of mortar and concrete tests, the flow tended to increase and the compressive strength was at the same level. In addition, the target properties of concrete for application to farm roads, which were a slump of 120±25 mm and a compressive strength of 24 MPa, were satisfied with a slump of 135 mm and a compressive strength of 42.1 MPa at 28 days. In February 2024, an on-site demonstration of a farm road was conducted in Seongmun-myeon, Dangjin-si, and as a result of reviewing the compressive strength according to curing conditions, the physical properties and durability of unhardened concrete, the target results were satisfied, expanding the use of CFDG by applying fine powder of blast furnace slag and carbon reduction can be expected.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.1
• /
• pp.53-64
• /
• 2015

This study presents the experimental results of pervious blocks subjected to a series of unique inflow conditions in urban area. The measured properties include the strength, permeability, drainage capacity and runoff, and evaporation for blocks made of two different size of aggregates. Results revealed that the strength satisfies the Korean Standard regardless of aggregate size whereas the immediate runoff occurred for the block with small size aggregate. On the other hand, the block with large aggregates allowed the drainage upon the initial inflow condition, which became hampered to induce the runoff by subsequent inflow. It was attributed to the fact that the capillary water often served as the hydraulic barrier in partially saturated condition. The salient observation indicated that the runoff highly depended on the evaporation and pre-wetting condition as well as the porosity and pore connectivity. The bilinear evaporate rate that makes the degree of saturation vary also had great influence on deterining the time-dependent runoff.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.4 s.334
• /
• pp.29-36
• /
• 2005

This paper presents the first hardware design of ARIA that KSA(Korea Standards Association) decided as the block encryption standard at Dec. 2004. The ARIA cryptographic algorithm has an efficient involution SPN (Substitution Permutation Network) and is immune to known attacks. The proposed ARIA design based on 1 cycle/round include a dual port ROM to reduce a size of circuit md a high speed round key generator with barrel rotator. ARIA design proposed is implemented with Xilinx VirtexE-1600 FPGA. Throughput is 437 Mbps using 1,491 slices and 16 RAM blocks. To demonstrate the ARIA system operation, we developed a security system cyphering video data of communication though Internet. ARIA addresses applications with high-throughput like data storage and internet security protocol (IPSec and TLS) as well as IC cards.

• Resources Recycling
• /
• v.16 no.1 s.75
• /
• pp.44-53
• /
• 2007

The Jeonju-Il mine tailings contain large quantities of $SiO_2\;and\;Al_2O_3$ and lesser quantities of metallic components. In this study, we studied about the possibility of using mine tailings as a raw material in various industries. it was found that the sintered mine tailings had a good quality in every respect such as chromaticity, firing shrinkage and water absorption etc. Therefore if can substitute clay mineral in the ceramic industry. Also it can substitute about 2.94% of the raw materials of ordinary portland cement. We can use the coarse tailing as the fine aggregate for the ready-mixed mortar; and the fine tailing, as the filler for the bituminous paving mixture; because both products were not only suitable for Korea industrial standard in quality, but also environmentally harmless.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.3
• /
• pp.316-321
• /
• 2016

This study developed an eco-block for grass growth using the expanded vermiculites that absorb bacteria selected considering for the high pH and dry environments and plant growth. For the developed eco-block, a fundamental properties including compressive strength gain and water absorption and ecology characteristics were tested. The selected bacteria was Bacillus alcalophilus a nd Rhodoblastus acidophilus and had high concentration of $10^9cell/mL$. The expanded vermiculite that was used for shelter of bacteria was added by 7.5% and 10% replacement of the natural aggregates by volume. The developed eco-block achieved the minimum requirements specified in SPS provision and significantly effective in reducing chemical Chemical Oxygen Demand(COD) concentration and enhancing the growth of fish and plant.

• Journal of the korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.18-23
• /
• 1982

최근 자동차의 고속경향화 추세는 많은 진전을 보고 있으며 또 앞으로도 많은 연구와 노력이 경주되어야 하리라고 본다. 그 가운데 하나로 스프링의 경량화는 대략 다음과 같은 3방향에서 연구되고 있다. 1) 복합재료, 즉 GFRP(carbon fiber reinforced plastics), 나아가서는 BFRP(born fiber reinforced plastics)의 탄선과 경량성을 이용한 스프링. 2) 형상, 즉 구조적인 면에서 스프링소재를 후판으로 사용함으로서, 다매물에서 단매 또는 소수 매의 거물곡선 스피링(parabolic taper spring)으로의 변진. 3) 고응력 사용, 즉 종래의 스프링량보다 높은 탄성을 가진 재료로써 스프링 응력을 톺게 사용할 수 있는 강종의 개발 등이다. 특히 3)의 탄성한을 \ulcorner이는 문제는 2)의 후재화와 더불어 열처리성, 가공성 등이 문제가 되어 이에 따라 신강종으로서의 변천을 강요하게 된다. 그러므로 국제경쟁력을 강화하기 위하여 각국 들이 활발하게 연구 및 개발을 추진하고 있는 현상이다. 우리나라의 경우 현재 제작기술은 어느 정동 많이 축적되고 있으나, 아직 R&D면에서는 점진적으로 추진되고 있다. 이와 같은 실정에서 자동차산업의 국제화와 더불어 종래 사용된 스프링강재의 재검토가 우리나라에서도 긴급히 필 요하게 되었따. 그 예로서 KS SPS5(JIS SUP9)의 강종이 종래 일본에서 자동차용스프링의 대 종을 이루고 있던것이 최근에는 SUP9A로 전환되고 있다. 이것은 SUP9A는 SUP9보다 기계적 성질이 우수하며, 또한 자동차분야의 세계제일위인 미국의 SAE5160재와 일지되고 있다. 그러므로 국제화 경향과 더불어 SUP9종은 SUP9A로 전환되고 있으므로서 우리 나라의 경우에도 자동차 스프링의 수출용은물론이고, 국내용에도 SUP9A에 해당하는 규격이 제정되고, 또한 빠른 전환이 필요하다고 본다. 이와 같은 국제적인 추세는 SUP6을 SUP7H종으로 더욱 향상된 것이 실용 화되고 있다. 아래에서 이에 대한 기계적 특성을 중심으로 검토키로 한다.

• Korean Journal of Acupuncture
• /
• v.28 no.3
• /
• pp.53-62
• /
• 2011

Objectives : Burn is most common adverse events of moxibustion. Various kinds of components influence on the heat stimulation of commercial indirect moxa, but there are not enough investigation about the status. The purpose of this study is to investigate the 6 components to build a base data that is currently available to build a standard of an indirect moxibustion. Methods : The length and weight, density, thickness of the paper disk, diameter of the paper disk, and diameter in the paper disk hole were measured against 6 kinds of commercial indirect cautery. Results : 1. 'Seoam', 'Kihwang' and 'Taegeuk' shows uniform length than the other brands. 2. 'Dongbang', 'Kihwang' and 'Taegeuk' shows uniform weight than the other brands. 3. 'Dongbang', 'Kihwang' and 'Taegeuk' shows uniform density than the other brands. 4. 'Dongbang' and 'Kihwang' shows uniform thickness than the other brands. 5. 'Seoam', 'Dongbang' and 'Taegeuk' shows uniform diameter of disc hole than the other brands. Conclusions : As a result of investigation, 'Dongbang' and 'Kiwhang' indirect moxibustion was identified as a uniform product. This results are considered as an important base materials of the KS through commercial indirect moxibustion.

• Journal of Biomedical Engineering Research
• /
• v.31 no.2
• /
• pp.123-128
• /
• 2010

The thermometers is widely used in diagnostic medical devices, and the safety and accurate performance of these devices are important in the diagnosis and monitoring of personal health. Especially, the accuracy of infra-red thermometer is highly emphasized. Here two typical thermometers are utilized for this purpose: the electronic thermometers measure body temperature by contacting to subject while infra-red thermometers measure by no contacting to subject. Therefore, the evaluating items of each thermometer are different, and the standard for each temperature is highly needed. But, there have been no international standards of each thermometer such as IEC. In this paper, we developed the standards of electronic and infra-red thermometer based on national standards such as KS, ASTM, EN, JIS and FDA guidance. The new standards focused on the safety and suitable performance for health care. This standards were applied to enact and revise the electronic medical device standards. So it can be applied to evaluate the safety and performance on technical file review. We predict that this standard will improve the quality of diagnostic medical devices (thermometers) and increase the international competitive power of domestic product.