• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2003.10a
• /
• pp.152-152
• /
• 2003

The majority of the SKYBIO will be used in the treatment of water in food processing plants, swimming pools and cooling towers, in the manufacture fabric softeners in Australia. Most will eventually be released into domestic sewage system as a consequence of product use. The SKYBIO is not readily biodegradable (0% over 28 days), and is expected to have a low partition coefficient and high water solubility (285 g/L), all indicating that the material would be mobile in both aquatic and terrestrial compartment. The PEC/PNEC ratio for the aquatic environment is 56. This value is significantly greater than 1, indicating an immediate concern to the aquatic compartment. However as a consequence of it's cationic character, the SKYBIO will be expected to associate to negatively charged organic matter in soil and sediment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.27-35
• /
• 2008

In order to determine the most appropriate recycling line to treat old corrugated container (OCC) to substitute unbleached kraft pulp (UKP) for the manufacture of kraft paper, three recycling lines were evaluated in pilot scale tests. The recycling line consisting of kneading, flotation, washing, dispersion and screening steps was able to produce pulp with acceptable appearance. Kneading was shown to be more efficient treatment to reduce specks than dispersion. In addition, 0.2 mm slot screen was very effective to remove specks. Severe damages on fiber morphology such as shortening of fiber and formation of fines were not observed during mechanical treatments such as kneading and dispersion. Most of strength properties of the kraft paper produced with the recycled pulp were found to be slightly increased after treated in the recycling lines.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.937-939
• /
• 2007

Carbon nanotubes (CNTs) have used as an electron field emitter of the field emission display (FED) due to their characteristics of high-electron emission, rapid response and low power consumption. However, to commercialize the FED with CNT emitter, some fundamental problems regarding life time and emission efficiency have to be solved. In this study, we investigated the $TiO_2$ coated CNT as a field emitter. $TiO_2$ nanoparticles can coated on CNT surface by chemical solution method. $TiO_2$ nanoparticles had uniform size with the average size of about 2.4 nm to 3.1 nm. Field emission performance of CNT coated with $TiO_2$ nanoparticles was evaluated and discussed.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.4
• /
• pp.34-41
• /
• 2003

The effect of wettability of deinking agents which formed with various nonionic surfactants against the pulp fibers and ink particles were studied, And the effect of flotation processes on the deinking were also investigated. The wettabilities of the deinking agents against the water and ink particles were measured by Washburn tube and sessile drop techniques, respectively. As the water absorption increased (i.e., hydrophilicity increased), the ink removal increased, which indicates that the ink removal is strongly affected by the detachment process due to the swelling of the pulp. Also, when the contact angle of air/ink/deinking agent increased, the hydrophobicity of the ink particles increased, the efficiency of the ink removal and the brightness increased.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2003.10b
• /
• pp.116-116
• /
• 2003

2-Bromopropane (2-BP), a halogenated propane analogue, is a substitute for chlorofluorocarbones (CFCs) which have a great potential to destroy the ozone layer and to warm the earth's environment. The present study was undertaken to evaluate the potential adverse effects of 2-BP on pregnant dams and embryo-fetal development after maternal exposure during the gestational days (GO) 6 through 17 in ICR mice.(omitted)

• Bulletin of the Korean Chemical Society
• /
• v.15 no.1
• /
• pp.28-33
• /
• 1994

The laser-assisted chemical vapor deposition (LCVD) is described, by which the growth of single-phase GaN epitaxy is achieved at lower temperatures. Trimethylgallium (TMG) and ammonia are used as source gases to deposit the epitaxial films of GaN under the irradiation of ArF excimer laser (193 nm). The as-grown deposits are obtained on c-face sapphire surface near 700$^{\circ}$C, which is substantially reduced, relative to the temperatures in conventional thermolytic processes. To overcome the lattice mismatch between c-face sapphire and GaN ad-layer, aluminum nitride(AlN) is predeposited as buffer layer prior to the deposition of GaN. The gas phase interaction is monitored by means of quadrupole mass analyzer (QMA). The stoichiometric deposition is ascertained by X-ray photoelectron spectroscopy (XPS). The GaN deposits thus obtained are characterized by X-ray diffractometer (XRD), scanning electron microscopy (SEM) and van der Pauw method.

• Journal of Electrochemical Science and Technology
• /
• v.10 no.2
• /
• pp.250-255
• /
• 2019

Poly(ethylene oxide) (PEO)-based solid polymer electrolytes (SPEs) show promise for improving the lithium ion battery safety. However, due to oxidation of the PEO group and corrosion of the Al current collector, PEO-based SPEs have not previously been effective for use in $LiCoO_2$ (LCO) cathode materials at room temperature. In this paper, a semi-interpenetrating polymer network (semi-IPN) PEO-based SPE was applied to examine the performance of a LCO/SPE/Li metal cell at different voltage ranges. The results indicate that the SPE can be applied to LCO-based lithium polymer batteries with high electrochemical performance. By using a carbon-coated aluminum current collector, the Al corrosion was mostly suppressed during cycling, resulting in improvement of the cell cycle stability.

• Applied Chemistry for Engineering
• /
• v.20 no.4
• /
• pp.407-410
• /
• 2009

18~19 wt% $KMnO_4$/$SiO_2-Al_2O_3$ with Si/Al = 1/5 and 1/10, and 20 wt% $KMnO_4$/$Al_2O_3$ were prepared by solvent evaporation method. Catalytic activity of ethylene abatement over those samples were evaluated and compared under the conditions of GHSV $1125h^{-1}$, ethylene gas (ethylene 0.2%, air 99.8%, relative humidity 50%) at 30, 40, 60 and $120^{\circ}C$ using a fixed-bed reactor. $KMnO_4$/$SiO_2-Al_2O_3$ was showed better performance than $KMnO_4$/$Al_2O_3$ by 170~210% at 30, $40^{\circ}C$, and by 60% at 60, $150^{\circ}C$, respectively.

• Toxicological Research
• /
• v.22 no.1
• /
• pp.61-67
• /
• 2006

Changes in hematology and serum biochemistry after treatment of recombinant human erythropoietin (rHuEPO, HM10760) were screened in 4 male cynomolgus monkeys (Macaca fascicularis). Four monkeys, composed of a treatment group of HM10760 and a positive control group of $Aranesp^(R}$, were subcutaneously administered at same dose of $100{\mu}g/kg$. Both groups did not show any change in body weights and food consumption for 4 weeks compared with those of pretreatment. Both groups did not show any change in total leukocyte count (WBC) and platelet count, while both groups showed increased platelet distribution width (PDW) percentage in HM10760 group during a period from day 5 to day 59 and in $Aranesp^(R}$ group during a period from day 9 to day 26. Both groups showed increases in red blood cells (RBC), hemoglobin (HGB), and hematocrit (HCT) approximately 10 days after treatment compared with those of pretreatment (day 0). The increased levels of RBC, HGB, and HCT were much higher in HM10760 than in $Aranesp^(R}$ by the increases of $3.2%{\sim}12.5%$ for RBC, $3.8%{\sim}17.1%$ for HCT, and $1.85%{\sim}11%$ for HGB. Both groups showed increases in red cells distribution width (RDW) and reticulocyte (RET) compared with those of pretreatment, showing the highest peak from day 9. The increased level of RET lasted up to day 14 in $Aranesp^(R}$ group, while it lasted up to day 23 in HM10760 group. The increased level of RDW lasted up to day 59, it was much higher in HM10760 by the increase of $10.1%{\sim}17.6%$ than in $Aranesp^(R}$ group. In serum biochemistry, both groups showed a decrease in chloride level compared with those of pretreatment. These findings indicated that HM10760 increased RBC, HGB, HCT, RDW, and RET compared with those of pretreatment, and the increased levels were much higher in HM10760 than in $Aranesp^(R}$.

• Tribology and Lubricants
• /
• v.30 no.5
• /
• pp.256-264
• /
• 2014

Enhancing the value of fine chemicals based on biomass resources is an important objective for addressing environmental and other concerns such as demand for renewable or green products, as well as from the political perspective to reduce dependence on fossil feedstock associated with the use of petroleum-based products. Based on these considerations, we studied the synthesis of estolide using waste plant-based oil materials and their application as lubricants and pour point depressants. Five estolides were prepared by varying molar ratio of palmitic acid (PA) to oleic acid (OA) using a reaction time of 48 h. The estolides were characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR). The isolated yields were in the range of 57-78 % and purity was 93-97%, showing iodine values of 18.2-37.8, total acid numbers (TANs) of 75.6-94.2 mg KOH/g and estolide numbers (ENs) of 1.2-1.8. Increasing the ratio of OA to PA in the synthesis decreased the kinematic viscosity and clouding point of the estolides. Four ball wear test of the estolides as a base oil demonstrated that the wear scar diameter (WSD) of the estolides was significantly lower (0.320-0.495 mm) than the WSD of general base oils such as 150N and Yubase (0.735 and 0.810 mm, respectively), indicating better wear resistance of the estolides. However, the lubricant property was found to be independent of the amount of OA in the estolides. These new materials are prospective candidates for application as a lubricant base oil.