• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.197-210
• /
• 2012

The KOrea Multi-Purpose SATellite(KOMPSAT)-2 has a capability to provide a cross-track stereo imagery using two different orbits for generating various spatial information. However, in order to fully realize the potential of the KOMPSAT-2 stereo imagery in terms of mapping, various tests are necessary. The purpose of this study is to evaluate the possibility of mapping using the KOMPSAT-2 stereo imagery. For this, digital plotting was conducted based on the stereoscopic images. Also the Digital Elevation Model(DEM) and an ortho-image were generated using digital plotting results. An accuracy of digital plotting, DEM, and ortho-image were evaluated by comparing with the existing data. Consequently, we found that horizontal and vertical error of the modeling results based on the Rational Polynomial Coefficient(RPC) was less than 1.5 meters compared with the Global Positioning System(GPS) survey results. The maximum difference of vertical direction between the plotted results in this study and the existing digital map on the scale of 1/5,000 was more than 5 meters according as the topographical characteristics. Although there were some irregular parallax on the images, we realized that it was possible to interpret and plot at least seventy percent of the layer which was required the digital map on the scale of 1/5,000. Also an accuracy of DEM, which was generated based on the digital plotting, was compared with the existing LiDAR DEM. We found that the ortho-images, which were generated using the extracted DEM in this study, sufficiently satisfied with the requirement of the geometric accuracy for an ortho-image map on the scale of 1/5,000.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1285-1300
• /
• 2022

Turbidity, the measure of the cloudiness of water, is used as an important index for water quality management. The turbidity can vary greatly in small river systems, which affects water quality in national rivers. Therefore, the generation of high-resolution spatial information on turbidity is very important. In this study, a turbidity retrieval model using the Korea Multi-Purpose Satellite-3 and -3A (KOMPSAT-3/3A) images was developed for high-resolution turbidity mapping of Han River system based on eXtreme Gradient Boosting (XGBoost) algorithm. To this end, the top of atmosphere (TOA) spectral reflectance was calculated from a total of 24 KOMPSAT-3/3A images and 150 Landsat-8 images. The Landsat-8 TOA spectral reflectance was cross-calibrated to the KOMPSAT-3/3A bands. The turbidity measured by the National Water Quality Monitoring Network was used as a reference dataset, and as input variables, the TOA spectral reflectance at the locations of in situ turbidity measurement, the spectral indices (the normalized difference vegetation index, normalized difference water index, and normalized difference turbidity index), and the Moderate Resolution Imaging Spectroradiometer (MODIS)-derived atmospheric products(the atmospheric optical thickness, water vapor, and ozone) were used. Furthermore, by analyzing the KOMPSAT-3/3A TOA spectral reflectance of different turbidities, a new spectral index, new normalized difference turbidity index (nNDTI), was proposed, and it was added as an input variable to the turbidity retrieval model. The XGBoost model showed excellent performance for the retrieval of turbidity with a root mean square error (RMSE) of 2.70 NTU and a normalized RMSE (NRMSE) of 14.70% compared to in situ turbidity, in which the nNDTI proposed in this study was used as the most important variable. The developed turbidity retrieval model was applied to the KOMPSAT-3/3A images to map high-resolution river turbidity, and it was possible to analyze the spatiotemporal variations of turbidity. Through this study, we could confirm that the KOMPSAT-3/3A images are very useful for retrieving high-resolution and accurate spatial information on the river turbidity.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.83-91
• /
• 2012

Crown density, which is defined as the proportion of the forest floor concealed by tree crown, is important and useful information in various fields. Previous methods of measuring crown density have estimated crown density by interpreting aerial photographs or through a ground survey. These are time-consuming, labor-intensive, expensive and inconsistent approaches, as they involve a great deal of subjectivity and rely on the experience of the interpreter. In this study, the crown density of a forest in Korea was estimated using KOMPSAT-2 high-resolution satellite images. Using the image segmentation technique and stand information of the digital forest map, the forest area was divided into zones. The crown density for each segment was determined using the discriminant analysis method and the forest ratio method. The results showed that the accuracy of the discriminant analysis method was about 60%, while the accuracy of the forest ratio method was about 85%. The probability of extraction of candidate to update was verified by comparing the result with the digital forest map.

• Korean Journal of Remote Sensing
• /
• v.31 no.2
• /
• pp.161-170
• /
• 2015

This paper presents an efficient image fusion method to be appropriate for the KOMPSAT-2 and 3 satellites. The proposed method is based on the well-established component substitution (CS) approach. The proposed method is divided into two parts: 1) The first step is to create a intensity image by the weighted-averaging operation of a multi-spectral (MS) image and 2) the second step is to produce an optimal high-frequency image using the statistical properties of the original MS and panchromatic (PAN) images. The performance of the proposed method is evaluated in both quantitative and visual analysis. Quantitative assessments are performed by using the relative global dimensional synthesis error (Spatial and Spectral ERGAS), the image quality index (Q4), and the spectral angle mapper index (SAM). The qualitative and quantitative assessment results show that the fusion performance of the proposed method is improved in both the spectral and spatial qualities when it is compared with previous CS-based fusion methods.

• Korean Journal of Remote Sensing
• /
• v.30 no.1
• /
• pp.1-12
• /
• 2014

The purpose of this paper is to provide a compact overview of the state-of-art image mosaic algorithms in commercial softwares and to propose objective assessment method of that. Among them, several algorithms, widely used and high quality, result in the mosaic image by applying to seven different kinds of seasons of KOMPSAT-2 images and then consequently each result is analyzed visually. Moreover, quality index is suggested to assess the similarity with colors regarding adjacency images and then it is performed by comparing and analyzing the visual and quantitative results. Consequently, we found out the suggested quality index is feasible.

• Korean Journal of Remote Sensing
• /
• v.32 no.5
• /
• pp.453-469
• /
• 2016

Many image fusion quality assessment techniques, which include Wald's, QNR and Khan's protocols, have been proposed. A total procedure for the quality assessment has been defined as the quality assessment protocol. In this paper, we compared the performance of the three protocols using KOMPSAT-2/3/3A satellite images, and tested the applicability to the fusion quality assessment of the KOMPSAT satellite images. In addition, we compared and analyzed the strengths and weaknesses of the three protocols. We carried out the qualitative and quantitative analysis of the protocols by applying five fusion methods to the KOMPSAT test images. Then we compared the quantitative and qualitative results of the protocols from the aspects of the spectral and spatial preservations. In the Wald's protocol, the results from the qualitative and quantitative analysis were almost matched. However, the Wald's protocol had the limitations 1) that it is timeconsuming due to downsampling process and 2) that the fusion quality assessment are performed by using downsampled fusion image. The QNR protocol had an advantage that it utilizes an original image without downsampling. However, it could not find the aliasing effect of the wavelet-fused images in the spectral preservation. It means that the spectral preservation assessment of the QNR protocol might not be perfect. In the Khan's protocol, the qualitative and quantitative analysis of the spectral preservation was not matched in the wavelet fusion. This is because the fusion results were changed in the downsampling process of the fused images. Nevertheless, the Khan's protocol were superior to Wald's and QNR protocols in the spatial preservation.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_3
• /
• pp.2027-2034
• /
• 2021

Using multi-temporal KOMPSAT-3/3A high-resolution satellite images, the Normalized Difference Vegetation Index (NDVI) for the area around the Fukushima daiichi nuclear power plant was determined, and the pattern of vegetation changes was analyzed. To calculate the NDVI, surface reflectance from the KOMPSAT-3/3A satellite image was used. Satellite images from four years were used, and the zones where the images overlap was designated as the area of interest (AOI) for the study, and by setting a profile passing through highly vegetated area as a data analysis method, the changes by year were examined. In addition, random points were extracted within the AOI and displayed as a box plot to quantitatively indicate change of NDVI distribution pattern. The main results of this study showed that the NDVI in 2014 was low within AOI in the vicinity of the nuclear power plant, but vegetated area continued to expand until 2021. These results were also confirmed in the change monitoring results shown in a profile or box plot. In disaster areas where access is restricted, such as the Fukushima nuclear power plant area, where it is difficult to collect field data, obtaining land cover classification products with high accuracy using satellite images is challenging, so it is appropriate to analyze them using primary outputs such as vegetation indices obtained from high-resolution satellite imagery. It is necessary to establish an international cooperation system for jointly utilizing satellite images. Meanwhile, to periodically monitor environmental changes in neighboring countries that may affect the Korean peninsula, it is necessary to establish utilization models and systems using high-resolution satellite images.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.79-90
• /
• 2017

Urban environment represent one of the most dynamic regions on earth. As in other countries, forests, green areas, agricultural lands are rapidly changing into residential or industrial areas in South Korea. Monitoring such rapid changes in land use requires rapid data acquisition, and satellite imagery can be an effective method to this demand. In general, SAR(Synthetic Aperture Radar) satellites acquire images with an active system, so the brightness of the image is determined by the surface roughness. Therefore, the water areas appears dark due to low reflection intensity, In the residential area where the artificial structures are distributed, the brightness value is higher than other areas due to the strong reflection intensity. If we use these characteristics of SAR images, settlement areas can be extracted efficiently. In this study, extraction of settlement areas was performed using TerraSAR-X of German high-resolution X-band SAR satellite and KOMPSAT-5 of South Korea, and object-oriented image classification method using the image segmentation technique is applied for extraction. In addition, to improve the accuracy of image segmentation, the speckle divergence was first calculated to adjust the reflection intensity of settlement areas. In order to evaluate the accuracy of the two satellite images, settlement areas are classified by applying a pixel-based K-means image classification method. As a result, in the case of TerraSAR-X, the accuracy of the object-oriented image classification technique was 88.5%, that of the pixel-based image classification was 75.9%, and that of KOMPSAT-5 was 87.3% and 74.4%, respectively.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.20-24
• /
• 2007

센서의 광학 해상력에 따라 센서에 도달하는 에너지의 앙은 영상의 화소값으로 변환되므로，이 관계는 위성 영상의 정량적인 광학적 특성을 이해하기 위한 바탕이 되며，영상의 질을 유지하기 위한 척도가 되기도 한다. 위성영상의 광학적 특성은 ON 값 을 실제 지표물의 반사에너지 값인 Radiance와 Reflectance로 의 변환을 통하여 추정할 수 있으며，이러한 과정을 절대복사보정(Absolute Radiometric Calibration) 이라고 한다. 절대복사보정 과정에서 센서에 도달하는 태양 에너지의 양을 추정하기 위하여 복사전달모델이 사용된다. 태양 에너지가 대기를 통과함에 따라 여러 가지 상호 작용이 일어나게 되므로 복사 전달모델을 사용하기 위해서는 다양한 입력 변수가 필요하게 된다. 이러한 입력 변수로는 지표물의 반사율， 대기자료，그리고 센서의 특성 등이 포함되며， 이 연구에서는 KOMPSAT-2 위성의 MSC 영상의 절대복사보정 과정에서 복사전달모델의 결과에 영향을 미치는 입력 변수의 특성을 살펴보고자 한다.

• Korean Journal of Remote Sensing
• /
• v.33 no.6_3
• /
• pp.1233-1242
• /
• 2017

In this study, we tried to analyze deforestation due to forest fire by using KOMPSAT satellite imagery. For deforestation analysis, unsupervised change detection algorithm is applied to multitemporal images. Through ITPCA (ITerative Principal Component Analysis) of NDVI (Normalized Difference Vegetation Index) generated from multitemporal satellite images before and after forest fire, changed areas due to deforestation are extracted. In addition, a post-processing method using SRTM (Shuttle Radar Topographic Mission) data is involved in order to minimize the error of change detection. As a result of the experiment using KOMPSAT-2 and 3 images, it was confirmed that changed areas due to deforestation can be efficiently extracted.