• Journal of the Korean Home Economics Association
• /
• v.32 no.1
• /
• pp.229-238
• /
• 1994

The purpose of this study was to investigate the objectification of coloring matter abstraction of the way to natural dye by cathamus flower. Watersoluble carthamin in the dyeing cathamus flower was removed for the fastness of dyeing and only insoluble carthamon was abstracted which came by solvent such as Sodium hydroxide(NaOH) Potassium hydroxide(KOH) Sodium carbonate(Na2CO3)and Potassi-um carbonate(K2CO3) Carthamon made abstract essence from a carthamus flower out of the pH6, pH7, pH9, pH11, solvent and by using a UV/VIS Spectra according to the change of pH. Silk dyes with solution abstract carthamon and it was treated by 5 kinds of mordant. The table of surface-colors was measured by the number of dyeing the color of silk dyed and by the kind of mordant which treated with and the dyeing was evaluated by measuring Color Fastness to Light and Washing.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.101-102
• /
• 2007

마그네슘합금은 산화가 잘되는 비철금속으로 표면처리 공정이 필수적이며, 주로 크로메이트공정이 주로 이용된다. 하지만 최근에 6가 크롬의 사용 규제로 인하여 non-크로메이트 방법 중 내식성이 우수한 아노다이징 공정에 대해 많은 연구가 진행중이다. 일반적으로 아노다이징 용액으로 잘 알려진 NaOH, $Na_3PO_4$ 및 KOH 용액에 코발트 아세테이트와 황화암모늄(Ammouium Sulfide)을 추가함에 따라 용액의 빛깔은 검정색으로 변하고 아크-아노다이징 후의 산화막의 색깔은 갈색을 띠었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.151.2-151.2
• /
• 2017

본 연구에서는 정전류 조건에서 알루미늄 합금의 PEO(Plasma Electrolytic Oxidation) 피막 형성 거동에 미치는 전해질 내 cation($K^+$, $Na^+$)의 영향을 아크 발생 양상, 전압-시간 곡선 및 형성된 표면피막 구조를 관찰하여 연구하였다. 전해질은 0.5 M NaOH + 1 M $Na_2SiO_3$ 수용액과 0.5 M KOH + 1 M $Na_2SiO_3$ 수용액이 사용되었다. 아크 발생은 cation의 종류에 상관없이 동일하게 가장자리부터 시작되어 내부로 이동함으로써 전 표면에 걸쳐서 일어났다. 전 표면에서 PEO 피막이 형성된 이후에는 한 지점에서 지속적으로 아크가 발생하는 로컬버닝 현상이 두 용액에서 모두 관찰되었으나 $K^+$이온이 포함된 용액에서 로컬버닝이 빠르게 일어났다. 시편표면에서 아크가 발생하는 동안 중 각 전해액에서의 전압-시간 곡선에서 전압의 상승과 하강이 반복되는 거동이 동일하게 관찰되었다. 이러한 전압 등락의 크기는 $K^+$ 이온이 포함된 수용액에서 더 크게 나타났으며, 그 결과 표면 거칠기가 상대적으로 더 높은 PEO 피막이 형성되었다.

• Korean Journal of Food Science and Technology
• /
• v.26 no.6
• /
• pp.696-703
• /
• 1994

The purpose of this study was to investigate the gelatinization properties of potato starch heated with microwave. Two types of potato starches were prepared; In group A raw potato starch was heated with microwave and in group B potato starch was isolated from potato heated with microwave. Both groups were exposed to the microwave energy in a 560W, 2,450 MHz oven for 60, 120, 180 and 300 seconds. Gelatinization behaviour by DSC made a few differences according to the ratio of starch to water. As the microwave heating time took longer, gelatinization temperature and gelatinization $enthalpy({\bigtriangleup}H_1)$ were decreased in and melting $enthalpy({\bigtriangleup}H_2)$ was increased in group A. Whereas they were increased in group B. In both groups, maximum viscosity in gelatinization by Brabender amylogram was decreased by microwave heating. Then the peak of the maximum viscosity was shifted to higher temperature and cold viscosity was slightly increased. In group A, viscosity in gelatinization and light transmittance by NaOH was increased in initial stage and gel volume in gelatinization by KSCN was decreased. On the other hand, in group B, viscosity by alkali was slightly decreased, but light transmittance by NaOH was almost never changed. Gel volume is decreased like group A.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.3
• /
• pp.120-128
• /
• 2005

In the construction industry, due to the cost rise of raw material for concrete, we have looked into recycling by-products which came from foundry. When using the Ground Granulated Blast-Furnace Slag(SG), it is good for enhancing the qualities of concrete such as reducing hydration heat, increasing fluidity, long-term strength and durability, but it has some problems : construction time is increased or the rotation rate of form is decreased due to low development of early strength. In this study, therefore, to enhance the early strength of SG mortar, we used some alkali activators(KOH, NaOH, $Na_2CO_3$, $Na_2SO_4$, water glass, $Ca(OH)_2$, alum. This paper deals with reacted products, setting time, heat evolution rate, flow and the strength development of SG cement mortar activated by alkali activators. From the results, if alkali activators were selected and added properly, SG is good for using as the materials of mortar and concrete.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2007-2009
• /
• 1999

In this paper, discharge domain of wire-cylindrical plasma reactor was separated from a gas flow duct to avoid unstable discharge by aerosol particle deposited on discharge electrode and grounded electrode. The NOx, SOx removal was experimentally investigated by a reaction induced to ammonium nitrate, ammonium sulfate using a low price of aqueous NaOH solution and a small quantity of ammonia. Volume percentage of aqueous NaOH solution used was 20% and $N_2$ flow rate was 2.5[$\ell$/min] for bubbling aqueous NaOH solution. Ammonia gas(14.82%) balanced by argon was diluted by air and was introduced to a main simulated flue gas duct through $NH_3$ injection system which was in downstream of reactor. The $NH_3$ molecular ratio[MR] was determined based on $NH_3$ to [NO+$SO_2$]. MR is 1.5. The NOx removal rates increased in the order of DC, AC and pulse, but SOx removal rates was not significantly effected by source of electricity. The NOx removal rate slightly decreased with increasing initial concentration but SOx removal rate was not significantly effect by initial concentration, and NOx, SOx removal rates decreased with increasing gas flow rate.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.136-141
• /
• 1998

재결정된 Zircaloy-4 합금을 35$0^{\circ}C$ 의 여러가지 알칼리 금속 수산화물 수용액에서 부식시켜 동일한 무게증가량을 갖도록 조절한 뒤, 1M H$_2$SO$_4$ 용액에서 그 시편에 대한 임피던스 특성을 분석하였다. LiOH, NaOH, KOH 순서로 알칼리 금속의 이온반경이 클수록 수소이온의 이동에 대한 임피던스가 증가함에 따라 산화막을 통한 수소이온의 흡수가 점차로 어려워졌다. 이것은 Zr$^4$$^{+}$와 이온반경이 비슷한 알칼리 금속 수용액 조건에서 얻은 부식시편은 open grain boundary 와 equiaxed microstructure의 산화막을 갖기 때문이었고, 반면에 Zr$^4$$^{+}$와 이온반경의 차이가 큰 알칼리 금속 수용액 조건에서 얻은 부식시편은 compact 한 columnar microstructure의 산화막을 갖기 때문인 것으로 생각된다.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.31-35
• /
• 2011

For high efficiency of Si-cells, Si wafers were textured by the KOH and NaOH etching solution to decreas the reflectance at surfaces of the cells. The textured surfaces were shown various types such as isotropic and anisotropic depending on the etching solution. The reflectance at sample of an anisotropic form with pyramid type was lower than that of isotropic form. The surface with isotropic form of general tiny circles on the surface increased the efficiency, however, the reflectance of it was increased. The efficiency was increased on surface with low roughness.

• Applied Biological Chemistry
• /
• v.9
• /
• pp.71-81
• /
• 1968

Defatted rice bran is mixed with diluted acid solution, the mixture is agitated some hrs. at constant temparature. After the mixture is filtered, thus filtrate is obtained. This filtrate is phytin extract solution. (Test-1) The alkali is added to this filtrate and filtered out, then the precipitation of phytin is obtained. (Test-2) At the test-1, the effect of kind of acid, conc. of acid, amount of extract sol'n., time of extraction, temp. of extraction, to the extract amount of phytin is tested. Consequently, the following facts are known. 1. Amount of phytin extract is greater HCI extraction than $H_{2}SO_4$ extraction. 2. At 0.3% HCI, the amount of phytin extract is greatest of all HCl extraction. 3. The sufficient amount of acid solution is 8-10 times of amount of defatted rice bran. 4. The time of extraction at room temperature is sufficient 8-12 hrs. 5. When extract temperature is $20-30^{\circ}C$, the amount of phytin extraction is greater of all temp. 6, When defatted rice bran 20 g is shanken with 160 ml of 0.3% HCl for 10 hr. at room temp., in this case the amount of phytin extract is 11.34% of defatted rice bran, it is 93% of theoretical yield. At the test-2 the effect of kind of precipitation agent, degree of nutralization to the amount of phytin prcipitation is tested. 1. Degree of nut. is best at pH 6.8-7.0. 2. When use of $Ca(OH)_2$ the amount of phytin precipitation is more than use of KOH, NaOH, or $NH_{4}OH$. 3. At pH 6.0-7.2, the solubility of phytin is followed. K-phytate > $NH_{4}-phytate$ > Na-phytate > Ca-phytate 4. When phytin extract solution is nutralized with $Ca(OH)_2$ to pH 7.0, the amount of phytin precipitation is 94.78% of theoretical yield.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.3
• /
• pp.299-312
• /
• 2008

The fat of Tra and Basa catfish (Mekong Delta, Viet Nam) was evaluated for the first time as the potential feedstock for biodiesel production, due to its abundance, availability and cheap cost. The unsaturated fatty acid contents of Tra and Basa fat were 57.97% and 64.17%, respectively. Biodiesel was prepared from Tra and Basa fat by methanolysis reaction using alkali catalysts like sodium hydroxide and potassium hydroxide. Effects of various process parameters on biodiesel production, such as molar ratio of methanol to fat, catalyst concentration, temperature and time were investigated. As those results, the transesterification can be performed under moderate conditions, and the biodiesel yields were shown more than 90%. KOH catalyst was the best catalyst for biodiesel production from both Basa and Tra fat. As the feedstock aspect, Basa fat was indicated more efficiency than that of Tra fat. The maximum yield could be achieved by the transesterification from Basa fat with 5:1 molar ratio of methanol to fat, 0.8% KOH catalyst, $50^{\circ}C$, and 50 min. For Tra fat, the optimal condition were at 6:1 molar ratio of methanol to fat, 0.8% KOH catalyst, $50^{\circ}C$, and 45 min. Nowadays, due to cheaper cost and abundance, Tra fat is a promised resource for cheap biodiesel production in Viet Nam.