• Journal of Korea Water Resources Association
• /
• v.36 no.2
• /
• pp.285-300
• /
• 2003

An event-based, kinematic, infiltration-excess, and distributed rainfall-runoff model using weather radar and Geographic Information System(GIS) was developed to acknowledge and account lot the spatial variability and uncertainty of several parameters relevant to storm surface runoff and surface flow The developed model is compatible with raster GIS and spatially and temporally varied rainfall data. To calibrate the model, Monte Carlo simulation and a likelihood measure are utilized; allowing for a range of possible system responses from the calibrated model. Using rain gauge adjusted radar-rainfall estimates, the developed model was applied and evaluated to a limited number of historical events for the Ralston Creek and Goldsmith Gulch basins within the Denver Urban Drainage and Flood Control District (UDFCD) that contain mixed land use classifications. While based on a limited number of Monte Carlo simulations and considered flood events, Nash and Sutcliffe efficiency score ranges of -0.19∼0.95 / -0.75∼0.81 were obtained from the calibrated models for the Ralston Creek and Goldsmith Gulch basins, based on a comparison of observed and simulated hydrographs. For the Ralston Creek and Goldsmith Gulch basins, Nash and Sutcliffe efficiency scores of 0.88/0.10, 0.14/0.71, and 0.99/0.95 for runoff volume, peak discharge, and time to peak, respectively, were obtained from the model.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.225-234
• /
• 2009

Real-time Aerial Monitoring System (RAMS) is to perform the rapid mapping in an emergency situation so that the geoinformation such as orthophoto and/or Digital Elevation Model is constructed in near real time. In this system, the GPS/INS plays an very important role in providing the position as well as the attitude information. Therefore, in this study, the performance of an IMU sensor which is supposed to be installed on board the RAMS is evaluated. And the integration algorithm of GPS/INS are tested with simulated dataset to find out which is more appropriate in real time mapping. According to the static and kinematic results, the sensor shows the position error of 3$\sim$4m and 2$\sim$3m, respectively. Also, it was verified that the sensor performs better on the attitude when the magnetic field sensor are used in the Aerospace mode. In the comparison of EKF and UKF, the overall performances shows not much differences in straight as well as in curved trajectory. However, the calculation time in EKF was appeared about 25 times faster than that of UKF, thus EKF seems to be the better selection in RAMS.

• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.365-372
• /
• 2017

Squat exercise is one of the important free weight exercises that can safely and effectively expect the athletic performance by establishing the rationale. Therefore, it is necessary to study the side effects caused by incorrect exercise, scientific countermeasures and to develop a exercise estimation model. It is effective and accurate to use a variety of assistive devices to calibrate athletic posture. The issues of the structural analysis for designing a foot plate for squat exercise is to model the behavior by the dynamic behavior. It should be consider that the center of gravity of each segmented body is different when the maximum load is applied. It is applied to complete system design through simulation method with kinematic dynamic, ground reaction force and load analysis for the free weight exercise equipment, VR device, and safety foot plate. In this paper, the authors propose the design method for the vertical load distribution applied in the design of the foot plate used for the squat exercise mechanism, and based on these results, design make the more safe and reliable free weight exercise equipment system.

• Journal of the Korea Convergence Society
• /
• v.11 no.9
• /
• pp.325-332
• /
• 2020

This study aimed to identify the difference of scapular movements between tennis players with and without shoulder impingement syndrome(SIS) and to verify the effect of kinesiology taping applied to scapular. A total of 15 players were categorized in SIS group(n=7) and control(CON) group(n=8). The scapular movements evaluated using 3-dimensional motion analysis in the 5 events of the flat first serve before and after the application of taping. The male of SIS group(-7.31±1.19° and -5.28±1.08°, respectively) had tilted scapular more anteriorly compared to CON group(-0.98±5.38° and -0.44±3.52°, respectively) at the maximally humeral external rotation and the impact(Z=-2.309, p=.021 and Z=-2.309, p=.021, respectively). The scapular(-8.11±2.57°) of female in SIS group tilted more anteriorly than that of CON(-0.97±3.31°) group at the maximally humeral external rotation(Z=-2.121, p=.034). But the scapular movements had no statistical differences between before and after the application of taping.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.28-34
• /
• 2014

Automatic transmission fluid (ATF) is used for automatic transmissions in the vehicle as the characterized fluid. Recently, the vehicle manufacture usually guarantee for fluid change over 80000~100000 km mileage or no exchange, but most drivers usually change ATF below every 50000 km driving in Republic of Korea. It can cause to raise environmental contamination by used ATF and increase the cost of driving by frequently ATF change. In this study, we investigate the various physical properties such as flash point, fire point, pour point, kinematic viscosity, cold cranking simulator, total acid number, and metal component concentration for fresh and used ATF after driving (50000 km, 100000 km). The result showed that the total acid number, pour point, Fe, Al and Cu component had increased than fresh ATF, but 2 kind of used oil (50000 km and 100000km) had similar physical values and metal component concentration.

• The Journal of Engineering Geology
• /
• v.25 no.4
• /
• pp.485-498
• /
• 2015

Structural analysis for a large-scale fault in Maegok-dong, Ulsan, was carried out based on filed-works to investigate the geometric and kinematic characteristics of the fault as well as its Quaternary slip. As results, a series of repeated stratigraphy, minor faults, fracture zones, and deformation band clusters are observed over a distance of about 100 m in the first studied site consisting of sedimentary rocks, which may indicate the damage zone of a large-scale fault in this site. In the second site, mainly composed of granitic clastic rocks, a large-scale thrust fault is expected based on low-angle dipping faults showing branched and/or merged patterns. Age of the last slip on this fault was restrained as after 33,275 ± 355 yr BP based on radiocarbon dating for organic material included in the gouge zone. Dimension of fault damage zone, dominant sense of slip, and age of the slip event associated with the fault suggest that these structures have a close relationship with the Ulsan Fault and/or Yeonil Tectonic Line, which are well-known large-scale neotectonic structural features around the study area. Therefore, it is necessary to study the characteristics of the faults in detail based on structural geology and paleoseismology in order to ensure seismic and geologic stability of the buildings under construction, and to prevent geologic hazards in this area.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.23-28
• /
• 2002

본 연구에서는 간단한 조작을 통하여 작물의 특성에 따라 진동방향을 조절 가능하게 함으로써 물리적 성질이 서로 다른 감자, 고구마, 마늘, 양파, 생강 등 거의 모든 뿌리작물의 수확에 이용할 수 있는 다목적 굴취기를 기구학적으로 설계하고, 뿌리작물 굴취기의 성능에 영향을 미치는 진폭, 진동수, 작업속도를 변화시킬 때 각각의 조합에 있어서 굴취판상의 특정한 점들의 운동궤적을 분석하고 이에 기초하여 굴취기의 설계변수와 작업에서의 설정변수 를 결정하고자 하였으며, 그 결과를 요약하면 다음과 같다. 1) 작업위치에 따라 굴취판 뒷부분(선별부)의 진동방향 조절이 가능하기 때문에 진동방향을 조절하면 물리적 성질이 서로 다른 감자, 고구마 마늘, 양파 등 거의 모든 뿌리작물의 수확에 이용할 수 있을 것으로 사료된다. 2) 굴취판의 궤적분석결과 진폭이 3mm일 때에는 캠 축의 회전속도와 작업속도에 관계없이 굴취작업이 불가능할 것으로 판단되었다. 진폭이 6mm일 때에는 작업속도 1.08km/hr에서 캠 축의 회전속도가 841rpm 이상이면 굴취작업이 가능할 것으로 판단되었고, 작업속도 2.16km/hr이상에는 굴취작업이 불가능할 것으로 판단되었다. 진폭이 9mm일 때에는 작업속도 1.08km/hr에서 작업할 때 사용한 캠축의 회전속도에 관계없이 굴취작업이 모두 잘 이루질 것으로 판단되었고, 작업속도 2.16km/hr에서는 캠축의 회전속도가 995rpm 일 경우에만 굴취작업이 가능할 것으로 판단되었으며, 작업속도 3.24km/hr에서는 작업위치나 캠축의 회전속도에 관계없이 모두 굴취작업이 불가능한 것으로 사료된다. 3) 작업속도를 1.08km/hr 이상으로 하려면 소요동력의 관점에서 볼 때 진폭은 크게하고 진동수는 작게 하는 것이 유리하기 때문에 진폭을 9mm이상 취하는 것이 바람직할 것으로 사료된다.회로 가장 많이 발생하였으며, 다음으로 밀양과 나주지역이 29회, 김제지역이 28회 등으로 많은 발생빈도를 보였다.생시 진화방법의 개발 등에 대한 기본data로서의 역할을 충분히 할 수 있을 것으로 사료된다. 평가되었다.us에 대하여 높은 것으로 나타났다.bangular에서 subrounded에 해당한다. 이러한 현저한 차이를 보이는 이유는 남극적 빙하성 환경 조건과 이 지역의 해양 퇴적학적 특성에 그 원인이 있다고 해석된다.ea. Our ancestors really began to drink teas from the period of Unified Sila on. This country turning to the Koryo dynasty, tea drinking manner began to prevail so much that drinking tea became a ceremony. Daring the Yi dynasty it was much camplicated to make and boil the leaf tea. As a result of the previous fact pure tea came to have disappeared and odorous pharmaceutical became prevailent. 7) For value of exploiting Kungjuk tea (ginger tea seasoned with phyllostachy and addition of honeyl) was the highest among many. The worth of developing all the teas among all the beverages was regarded as that high of 51%, while even the tea regarded as worthless obtai

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.344-350
• /
• 2013

A recent study reporting significantly reduced symmetry in arm swing amplitude in early Parkinson's disease (PD), as measured during gait by auditory cues velocity, led to this investigation of arm swing symmetry and amplitude in PD. The subjects were 14 elderly patients diagnosed with PD. Patients were measured of three conditions performed in random order: slow, general, fast. The auditory cue velocity consisted of a metronome beat ${\pm}20%$ than the subject's general gait speed. Using a motion analysis measurement system, changes in kinematic variables were compared to arm swing analysis. PD groups showed a highly significant reduction of the arm swing amplitude on the more affected body side(MAS)(p<.05). Comparison between the auditory cues velocity, there was a significant increase arm swing amplitude in fast velocity gait than slow and general velocity gait(p<.05). We conclude that motion analysis during gait by auditory cues velocity allows reliable investigation of asymmetric arm movements in early PD patients which attenuate with ongoing disease. The measurement of limb kinematics during gait by auditory cues velocity can broaden our methodological line-up for the analysis of complex motor programs in movement disorders.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.21-30
• /
• 2005

The purpose of this study is helps to make full use for perfect performance by grasping the defects of Tichonkich motion performed by athlete CSM For this, the study analyzed kinematical variables through Tichonkich motions performed at the first selection competition(1st trial) and final selection competition(2nd trial) for the dispatch to the 28th Athens Olympic Games using the three-dimensional cinematographical method with a high-speed video camera, and obtained the following results. 1. During Tichonkich motion, the execution time of up swing and the right hand moving to the left bar was shorter in the 2nd trial than the 1st one, while the execution time of down swing, the support of the left bar and the right hand moving to the right bar was longer in the 2nd trial than the 1st trial. 2. The horizontal position of COG in the 2nd trial was -35cm in the 1st stage, 42cm in the 3rd stage and 29cm in the 4th stage, that is, it showed a great swing focused on the circular movement compared to the 1st trial, while the vertical position of COG was -59cm in the 2nd stage, that is, it showed a small swing focused on a up and down movement. Also the 5th stage vertical position was 98cm, and the 6th stage vertical position was 95cm in the 2nd trial which were higher than those of the 1st trial, so it has provided magnificence required in the modern gymnastics. 3. And it was indicated that the horizontal velocity at the down swing phase proceeded forward more rapidly in the 2nd trial than that in the 1st trial, and the reverse ascent made a rapid vertical rise lessening left and right velocity change. And in the 5th stage, the 2nd trial was kept very slower in horizontal, vertical and left and right velocity that in the 1st trial, so it reached a handstand with leisurely movement. 4. In the 2nd trial, shoulder joint of the 1st, 2nd, 3rd stages kept a larger angle than that in the 1st trial, that is, it made a great swing while in the 1st trial, it showed a swing movement dependent on kick movement by the flexion and extension of hip joint. Also in the 2nd trial, the body formed a vertical posture with both hands supporting the left bar and hip joint was kept larger as $198^{\circ}$ and $190^{\circ}$ in the 5th and 6th stage than that in the 1st trial, so it made a handstand with the body uprightly stretched out, and magnificent and stable movement.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.3
• /
• pp.33-42
• /
• 2008

The purpose of this study was to analyze kinematic variables during Side kick motion in Taekwon Aerobics. The subjects of this study were the 7 skilled and 7 unskilled female college students. A QTM and an Auto Track were used to acquire raw data. The sampling rates camera was 100 Hz. The parameters were calculated and analyzed with Visual3D and SPSS 12.0. The results were as following; 1. In the elapsed time, there was no significance difference statically between a skilled and unskilled group. 2. In the cases of knee angle, there was significant difference statically at Maximum Knee Flexion2(p=0.046, F=4.925). 3. In the cases of knee angular velocity, there was significant difference statically at Maximum Knee Flexion1(p=0.031, F=5.940). 4. In the flexion/extension of hip angle, there was significant difference statically at Maximum Knee Flexion2(p=0.012, F=8.668). 5. In the abduction/adduction of hip angular velocity, there was significant difference statically at Minimum Knee Flexion (p=0.019, F=7.324). 6. In the external rotation/internal rotation of hip angular velocity, there was significant difference statically Minimum Knee Flexion(p=0.005, F=11.87).