• Journal of the Korean Society of Tobacco Science
• /
• v.31 no.2
• /
• pp.69-74
• /
• 2009

Potato Virus Y (PVY), PVY-vein necrosis strain, causes severe damage at growth, yield and leaf quality on flue-cured tobacco in Korea. The development of PVY resistant flue-cured varieties without quality deterioration is therefore urgently desired. The flue-cured tobacco, KF120 (Korea Flue-cured 120), was a male-sterile (ms) $F_1$ hybrid derived from the cross between msKF117 and KF0007-7. msKF117 was developed from the cross of NC82 with N. africana and KF0007-7 was developed from the cross of KF117 with NC82. The agronomic characteristics and disease resistance of KF120 was evaluated during 2006-2007 field performance test. It showed better growth characteristics and yield performance than standard cultivar KF109. It had 2 more leaves per plant, flowered 2 days later than KF109. The yield of cured leaf of KF120 was increased by about 5% compared to KF109. The chemical composition and physical properties of the cured leaf of KF120 were as much acceptable as those of KF109. KF120 showed high resistance to PVY compared to KF109. It showed a similar mode of resistance to bacterial wilt and black shank as was found in KF109.

• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.270-275
• /
• 2016

High density polyethylene (HDPE)/kenaf fiber (KF) composites included two types of KF with different lengths were fabricated by using a twin screw extruder. A thermally expandable microcapsule (EMC) was used to form HDPE/KF. The KF lengths were 0.3 mm and 3 mm. The contents of KF and EMC were fixed at 20 wt% and 5 wt%, respectively. From FT-IR data of KF, which underwent chemical treatment, peaks around 1700 and $1300cm^{-1}$ decreased. This might be caused by the reduction of lignin and hemicellulose due to the chemical treatment of KF. Based on the specific gravity, thermal stability and tensile property, physical properties of the composites with a 3 mm fiber were good. However, if the fiber is longer, poor appearance might be caused due to the thermal degradation during processing. Thus, the adequate length of KF should be chosen to maintain the appearance and physical properties for industrial applications of HDPE/KF/EMC composites. The tensile strength for 0.3 mm fiber treated with chemicals increased slightly.

• Clean Technology
• /
• v.16 no.1
• /
• pp.12-18
• /
• 2010

The object of the present study is to apply KF/MgO catalysts to remove sulfur dioxide from dibenzothiophene sulfone, a by-product of oxidative desulfurization. Potassium fluoride was deposited via an impregnation method on MgO. The effects KF loading and calcination on the characteristics of the KF/MgO catalysts were investigated through the BET surface area, XRF, XRD, and temperature-programmed desorption of $CO_2$. The catalytic performances of the samples were investigated during the decomposition of dibenzothiophene sulfone to biphenyl and sulfur dioxide gas. KF loaded on MgO prepared by the impregnation method showed high catalytic activities for the decomposition of dibenzothiophene sulfone. The higher activity of KF/MgO just dried at 373 K, avoiding the usual activation at high temperature, than that over the calcined catalyst is ascribed to increase of the amount of basic sites. The high basicity probably may be due to the coordinately unsaturated $F^-$. The simply dried 10 % KF/MgO catalyst, without the usual activation at high temperature, showed the optimal catalytic properties.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.37-42
• /
• 2018

In order to increase the compatibility of polypropylene (PP) and kenaf fiber (KF) felt, PP/KF and PP/KF/polyurethane (PU) felt composites were prepared by treating KF with three kinds of silane coupling agents. The concentration of silane coupling agents was fixed at 1 wt%. The chemical reaction between KF and silane coupling agents was confirmed by the existence of Si-O-Si and Si-O-C functional group bands appeared on FT-IR and X-ray photoelectron spectra (XPS). Thermal properties of PP/KF composites were investigated by DSC and TGA, and the thermal stability of PP/KF composites with treated KF increased. Based on tensile, flexural and impact properties of PP/KF and PP/KF/PU composites, 1-2 wt% of (3-aminopropyl)triethoxysilane (APS) contents were the optimum formulation as a compatibilizer. The tensile and flexural strength of the felt composites treated with the silane coupling agents were improved. This is mainly due to the improvement in the compatibility between PP and KF, which was confirmed by SEM images of the fractured surfaces after tension tests.

• Therapeutic Science for Rehabilitation
• /
• v.7 no.1
• /
• pp.27-35
• /
• 2018

Objective : The aim of this study was to identify correlation between KF-NAP and Pencil-Paper test(Line bisection test, Letter cancellation, Albert's test) and to determine the high sensitive assessment tool for spatial neglect. Method : Thirty-two stroke patients who admitted to an inpatient rehabilitation unit at the medical center in Seoul from September, 2014 to September, 2015 were included in our research. They all have spatial neglect (male=19, female=13, the average age 61.8). KF-NAP and Pencil-Paper test were performed within 7 days. The detection of spatial neglect was analyzed by total scores of each assessments. Results : The highest sensitivity assessments of spatial neglect was KF-NAP. The detection of spatial neglect through KF-NAP was 93.8% (Line bisection test 53.1, Letter cancellation 53.1%, Albert's test 37.5%). Line bisection test (r=.430), Letter cancellation(r=.641), Albert's test(r=.398) and KF-NAP scores had significant correlation(p<0.05). Conclusion : KF-NAP is higher sensitive in comparison with Pencil-Paper test for detection of spatial neglect as the assessment tool of spatial neglect during activities daily livings of patients and neglect severity could be assessed with KF-NAP. Therefore, KF-NAP is recommended for assessment of spatial neglect.

• Current Photovoltaic Research
• /
• v.3 no.2
• /
• pp.65-70
• /
• 2015

We applied KF on CIGS film to modify CIGS surface with a wider-bandgap surface layer. With the KF deposition the surface of CIGS film had fine particle on the CIGS surface at 350 and $300^{\circ}C$. No fine particle was detected at 500 and $250^{\circ}C$. With the KF treatment, the Ga and O content increased at the surface, while the In and Cu content decreased. The valence band maximum was lowered with KF treatment. The composition profile and band structure were positive side of applying KF on the CIGS surface. However, the efficiency decreased with the KF treatment due to high series resistance, probably due to too thick surface layer. A smaller amount of KF should be supplied and more systematic analysis is necessary to obtain a reproducible higher efficiency CIGS solar cells.

• Nuclear Engineering and Technology
• /
• v.22 no.4
• /
• pp.389-409
• /
• 1990

As a principal design of advanced CANDU fuel bundle, CANDU-KF39, CANDU-KF40 and CANDU-KF43 fuel bundles were proposed and evaluated with respect to the operating conditions of the CANDU-6 reactor of Wolsung Unit-1. From the results, the advanced fuel bundles show to be improved economical and technical benefits compared with the current 37-element bundle. Especially, it was appeared that the KF-39 fuel bundle has more benefits of the safety, technical and economical aspects of Wolsung Unit-1 rather than those of the KF-40 and KF-43 fuel bundles.

• YAKHAK HOEJI
• /
• v.43 no.6
• /
• pp.716-728
• /
• 1999

Whole oil and ketonic fraction (KF) of Leptospermum scoparium have been tested for their antimicrobial activity and combination effect with several antibiotics against various bacterial strains and fungi by using microbiological assay methods. Antibacterial activities of KF against a number of test strains were 2-3 fold stronger than those of whole oil. MICs of the KF were $65~125{\;}{\mu\textrm{g}}/ml$ against seven gram positive bacterial strains, $65~250{\;}{\mu\textrm{g}}/ml$ against 19 methicillin resistance Staphylococcus aureus strains, and $65~50{\;}{\mu\textrm{g}}/ml$ against 14 quinolone resistance strains. However, KF showed little or no activity against gram negative bacteria. MICs of the KF were $16~250{\;}{\mu\textrm{g}}/ml$ against more than 50% of the anaerobic bacterial strains tested. KF showed the higher antibacterial activity than bacitracin against 10 strains of Bacteroids thetaiotaomicron, or three strains of Bacteroides ovatus, and the more active than ciprofloxacin against one strain of Bacteroides thetaiotaomicron and three strains of Bacteroids ovatus. The MICs of KF was 63 and $250{\;}{\mu\textrm{g}}/ml$ against Aspergillus niger and Candida albicans, respectively. Antibacterial activities of KF in combination with 19 antibiotics against 14 strains and with four antifungal agents against one fungal strain were determined by paper strip diffusion method. While most of combination showed additivity, KF showed synergism with bacitracin, exfadroxil, cephradin, and meropenem for 29~57% of the strains tested. However, ofloxacin, enoxacin, sparfloxacin showed antagonism with KF for 43~71% of the strains. KF alone and in combination with bacitracin, gentamycin, neomycin, itraconazole, fluconazole, terfinafine and ketoconazole against five bacterial strains or one fungus strain synergistic effect was demonstrated against 33% of strains examined with FIC index value below 0.5 by checkerboard study. Synergistic effect of KF with gentamicin against Staphylococcus epidermidis 329 (QRS) was found by time-kill study.

• Fashion & Textile Research Journal
• /
• v.22 no.6
• /
• pp.862-872
• /
• 2020

This study explores the effects of facemasks on respiratory, thermoregulatory, cardiovascular responses during exercise on a treadmill and at rest. Five male subjects (25.8 ± 0.8 y, 171.8 ± 9.2 cm in height, 79.8 ± 28.1 kg in weight) participated in the following five experimental conditions: no mask, KF80, KF94, KF99, and N95. Inhalation resistance was ranked as KF80 < KF94 < N95 < KF99 and dead space inside a mask was ranked as KF80 = KF94 < N95 < KF99. The surface area covered by a mask was on average 1.1% of the total body surface area. The results showed no significant differences in body core temperature, oxygen consumption (VO2), carbon dioxide production (VCO2), heart rate or subjective perception among the five experimental conditions; however, cheek temperature, respiratory ventilation and blood pressure were greater for KF80 or KF94 conditions when compared to KF99 or N95 conditions (p<0.05). The differences among mask conditions are attributed to the dead space or specific designs (cup type vs pleats type) rather than the filtration level. In addition, the results suggest that improving mask design can help mitigate respiratory resistance from increased filtration.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1551-1558
• /
• 2021

Beacon signals used in indoor positioning system are reflected and distorted, resulting in noise signals. KF(Kalman Filter) has been widely used to remove this noise. In order to apply the KF, optimization process considering the signal type, signal strength, and environmental elements of each product is required. In this paper, we propose a solution to the optimization problem of KF Parameters using GA(Genetic Algorithm) in BLE(Bluetooth Low Energy) Beacon-based indoor positioning system. After optimizing KF Parameters by applying the proposed technique with a certain distance between Beacon and receiver, we compared the estimated distance passed through KF with the unfiltered distance. The proposed technique is expected to reduce the time required and improve accuracy of KF Parameters optimization in an indoor positioning system based on RSSI (Received Signal Strength Indication).