• 감성과학
• /
• 제24권4호
• /
• pp.149-156
• /
• 2021

본 연구에서는 1500℃ 이상의 극한 열 환경에서 사용되는 소재인 SiC (silicon carbide) 섬유를 복합방적사로 제조한 후에 원단을 제직하고 제직된 원단의 역학적 특성을 KES-FB system으로 측정하고 측정된 역학적 특성 값으로부터 착용성능을 분석하여 방화복으로의 활용 가능성을 알아보았다. 그 결과 직물의 역학적 특성에서는 인장선형성(LT)과 인장레질리언스(RT), 전단강성(G)을 나타내는 값이 원사의 제조형태에 따라서 그 특성 값의 차이를 보였으며, 직물의 두께와 평량, 밀도 값이 전단히스테리시스(2HG)와 압축레질리언스(RC) 값에 영향을 준다는 것을 알 수 있었다. 의복착용 성능에서는 착용 시 부피감을 나타내는 두께에 대한 압축에너지의 비(WC/T) 값에서 SiC 복합방적사로 제조된 직물의 값이 가장 우수한 값을 타나내었으며, 방염성능에서는 SiC 복합방적사로 제조된 직물이 탄화길이와 잔염시간에서 KFI 성능기준을 만족하여 방화복으로서의 활용이 가능함을 확인할 수 있었다.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1999년도 춘계학술발표논문집 논문집
• /
• pp.219-219
• /
• 1999

마직물은 통기성, 흡수성, 투습성이 좋고 건조가 빠른 편이므로 여름철 직물로 많이 사용되어 왔다. 마직물은 또한 뻣뻣하며 몸에 감기지 않고 촉감이 깔깔하여 시원한 느낌을 주며 다른 직물에 비해 강직하고 표면이 거칠고 드레이프성이 떨어지는 등의 독특한 태를 가지고 있다. KES-F 시험기에 의해 여러 물성량들을 종합적으로 계측할 수 있게 됨에 따라 의복의 착용감에 만족을 주는 소재의 성능에 대한 연구가 종래의 주관적평가에서 KES-F 시스템을 이용하여 객관적으로 태를 예측하는 방법으로 진행되고 있다. 그러나 태를 평가하는 객관적 방법에서는 일반적으로 Kawabata와 Niwa에 의해 만들어진 평가식들이 주로 사용되나 이런 식들은 주로 모직물이나 합성섬유직물들을 평가하기에는 적합하지만 마직물의 독특한 태를 평가하기에는 부족하다고 생각된다. 마직물의 태가 기존의 객관적 평가방법만으로는 규명되지 않기 때문에 주관적 태평가방법을 아울러 실시해야 할 필요가 있다고 생각된다. 따라서 본 연구에서는 마직물의 태를 평가하는 방법의 하나로 주관적 평가척도를 개발하고 이 척도를 사용하여 마직물의 주관적인 태 특성을 살펴보았다. 그리고 KES-FB 시스템을 사용한 객관적인 태를 측정하여 주관적 평가치와 객관적 측정치로부터 태 평가의 산출식을 유도하였다. 실험에 사용된 직물은 혼방률, 밀도, 두께 등이 다양한 암, 저마 그리고 마혼방직물과 한산모시, 중국마, 신합섬 직물 등 총 54종을 사용하였다. 마직물의 주관적 태 평가를 위해 26문항의 형용사쌍으로 구성된 9점의 의미미분척도를 개발하였으며 이 척도를 사용해 주관적 평가를 실시하였다. 또 객관적 평가를 위해 KES-FB 시스템을 통해 역학적 특성치를 구하였다. 주관적 평가를 실시한 결과 마직물의 태에 영향을 미치는 7개의 요인이 추출되었다. 이 요인들은 표면성질, 신축성/드레이프성, 중량감, 강연성, 회복성, 수분특성, 밀도감이었으며, 요인들로 설명되는 누적분산값은 67.18%였다.주관적 평가의 결과와 객관적 평가 결과를 이용해 마직물의 태를 평가하는 산출식을 제시하였다. 태 평가치의 경우 16가지 특성치를 모두 넣는 방법과 stepwise 방법, 또 Kawabatark 사용한 순차적 군 회귀법의 세가지 방법의 회귀식 중 16가지 특성치를 모두 넣는 방법의 결정계수가 가장 높았다.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2004년도 추계학술대회 논문집
• /
• pp.14-14
• /
• 2004

• Conservation and Restoration of Cultural Heritage
• /
• 제1권1호
• /
• pp.23-27
• /
• 2012

Bletilla striata is an important herb that is used as a paste for texture processing, an ingredient in incense and an additive for preserving calligraphic works and paintings. This study evaluated Bletilla striata, which has been used to preserve and manage the textiles and paper. In particular, this study examined the viscosity of a paste made from Bletilla striata, as well as the mechanical characteristics and antibiotic properties of the fabrics treated with the herb. In terms of viscosity, Bletilla striata paste was less sticky than wheat flour paste, meaning that the former can be applied more evenly to sized fabrics. In addition, Bletilla striata paste has high transparence, ensuring little color difference between the fabrics treated and not treated with the paste. Regarding the mechanical characteristics of the fabrics processed using the KES-FB System, the sized fabrics treated with Bletilla striata paste showed a higher flexibility and recovery rate and than those treated with the wheat flour paste, indicating that the former paste can be more effective in making fabrics maintain their original form and shape. Finally, silk fabrics treated with Bletilla striata showed very high antibiosis. This suggests that the paste can be used to develop antibiotic substances that can preserve textiles.

• 한국의류산업학회지
• /
• 제8권5호
• /
• pp.585-590
• /
• 2006

In the variation of physical properties of adhesive fabrics, the objective of this study is to analyze fitness of fusible interlining to four sorts of fabrics for men's suit with various structural parameters. Four fusible interlinings are used for adhering to fabrics for men's suit. Mechanical properties of these 16 adhesive fabrics fused with these interlinings are measured by KES-FB system for analysing appearance and wearing properties of garments and for examining the fitness of fusible interlining to the fabrics for men's suit. The variation of bending property for adhesive fabrics are found to be higher in the order of interlining 1(Cotton30/Rayon70, plain), interlining 2(Polyester30/Rayon70, warp knit), interlining 4(Polyester, shingosen fabrics with drawing textured yarn) and interlining 3(Polyester, double dot coating interlining). The variation of adhesive effect shows the same results with bending property and shows negative relation with extensibility in weft direction per extensibility in warp direction(EM2/EM1). The variation of peel strength of adhesive fabrics, woolen fabrics in the case of face fabrics and interlining 3 in the case of interlining shows the largest value respectively.

• 한국생활과학회지
• /
• 제15권2호
• /
• pp.275-281
• /
• 2006

The purpose of this study is to investigate hand and sensibility of PET treated by Ultra-Violet (UV). The 4-channel PET knit fabric was treated by a self-made UV instrument in 5cm distance with different time frames-0min, 30min, and 90min. For hand evaluation, mechanical properties were measured by the KES-FB system. The environmental condition was controlled at 29$^{\circ}C$, 75% (R.H.)-summer standard climate. Twenty female students evaluated 'roughness', 'smoothness', 'wetness', 'stiffness', 'coolness', 'touch', 'preference', and 'comfort'. The outcomes of the experiment are as follows: The surface roughness of mechanical properties showed significant differences and the value of PET irradiated by UV for 90min was highest. The order of primary hand value such as NUMERI and FUKURAMI was in a following order-Untreated > 30min treated > 90min treated. Total hand value showed that PET irradiated by UV for 90min was appropriate for using summer fabric. The results of subjective sensibility were that the untreated and 30min treated PET were recognized as similar and had a good evaluation on 'comfort', 'preference' and 'the sense of touch'. This consequence disagreed with total hand value, because it was considered that subjects' hand sensibility was dependent on the feel of smoothness.

• 한국의류학회지
• /
• 제36권7호
• /
• pp.703-713
• /
• 2012

This study analyzed the physical properties and flame retardancy of Tencel FR/Cotton complex knit fabrics in order to satisfy two aspects of eco-friendliness and functionality. The flame retardant (FR) treatment of complex knit fabrics was applied by a pad-dry-cure method for additional functionality. Tensile strength, extension, bursting strength, LOI, and flame retardancy were measured by the KS (Korean Standard) K manual. The hand value knit fabrics were measured by KES-FB system. Subsequently, tensile strength and extension of wale and tensile strength of course increased in tandem with the Tencel FR yarn content. Tencel FR/Cotton complex knit fabrics were suitable for summer-weight and for baby clothes through the KES-FB system measurements. The bursting strength of Tencel FR/Cotton complex knit fabrics decreased as the contents of the Tencel FR increased; in addition, LOI increased as the contents of Tencel FR increased. This was due to the Tencel FR flame resistance function; however, the tensile strength decreased. The optimum fiber content of Tencel FR/cotton content was 1:1. The optimum conditions of flame retardant treatment were a treatment temperature $130^{\circ}C$ and the concentration of finishing agent and assistance binder (AR4260) was 35% and 1%, respectively.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.227-236
• /
• 2018

As consciousness of safety becomes an important social issue, the demand for protective clothing is increasing. Conventional flame-retardant cotton working wear has low durability, and working wear with m-aramid fibers are stiff, heavy, less permeable, and expensive. In this study, recycled m-aramid and cotton have been blended to produce woven fabric of different compositions to enhance high performance and comfort to solve aforementioned problems. The fabrics were analyzed according to constituents and various structural factors. Mechanical properties were measured using KES-FB system. The measured thermal properties are TGA, $Q_{max}$, TPP and RPP. Fabric with polyurethane yarn covered by m-aramid/cotton spun yarn is observed to have good wearability. The fabric of open end spun yarn showed more stiffness than that of ring spun yarn. The sample with the high count of yarn has more smooth surface. In addition, high m-aramid content fabric is considered to have relatively high stiffness when using as clothing. In TGA the fabric with higher m-aramid content showed more stable decomposition behavior. The fabric having rough surface showed lower heat transfer properties in $Q_{max}$. The influence of the fabric thickness was important in convection and radiant heat test.

• 패션비즈니스
• /
• 제12권6호
• /
• pp.46-60
• /
• 2008

Lyocell is a regenerated cellulosic fiber manufactured by an environmentally friendly process. The major advantages of lyocell are the excellent drape forming property, the genuine bulkiness, smooth surface, and high dry/wet tenacities. However, one drawback of lyocell is its fibrillation property, which would degrade its aesthetic quality and lower the consumer satisfaction. In our previous studies, lyocell was treated with epichlorohydrin, a non-formalin based crosslinker, to reduce its fibrillation tendency. To investigate the changes of physical properties upon ECH-treatment, the hand characteristics of ECH-treated fabric were observed using KES-FB system and the 3D-virtual sewing image of the fabrics were obtained using 3D CAD simulation system in this study. Since epichlorohydrin(ECH) treatment was conducted in the alkaline medium, the weight reduction was observed in all treated lyocell. The treated lyocell became light, smooth and flexible in spite of ECH crosslinker application. LT and RT in tensile property upon the ECH treatment did not change significantly, however, EMT and WT in the tensile property increased. The significant decrease in bending rigidity was resulted in all ECH-treated lyocell, which is the result of the weight loss upon the alkali condition of ECH treatment. The bending rigidity increased again in the ECH 30% treated lyocell, however, the B value is still lower than the original. Therefore, the ECH-treated lyocell would be more stretchable and softer than the original. Shear rigidity was also decreased in all ECH-treated lyocell, which would result in more drape and body fitting when it is made as a garment. The ECH-treated fabric showed the softer smoother surface according to SMD value from KES evaluation. The virtual 3D sewing image of the ECH-treated lyocell did not show a significant change from that of the original except ECH 30% treated lyocell. ECH 30% treated lyocell showed a stiffer and more puckered image than the original.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 가을 학술발표회논문집
• /
• pp.360-364
• /
• 1998

지금까지, 천의 주관적인 태평가는 역학적인 특성에 의하여 결정된다고 연구되고 있다. 특히 KES-FB 시스템은 천의 역학적인 특성을 통계학적인 방법으로 객관화한 소프트웨어이다[1], 대체적으로 직물에 비해 편성물은 측정의 어려옴, 지역적인 기후특성, 문화적인 차이 때문에 태를 평가하는데 적용하기 난해한 면이 있다[2]. 종합적인 태는 천의 사용 용도와 사람의 정신적인 특성에 대한 반영이 개입되어야 하므로 적용하기에 곤란하지만, 최근에 응용되고 있는 퍼지이론과 신경망이론을 통하여 전체적인 태평가가 가능하리라 본다. (중략)