• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.188-189
• /
• 2009

In this study, in order to develop excellent lead-free composition ceramics for piezoelectric transformer, $(K_4CuNb_8O_{23})$ added $(K_{0.5}Na_{0.5})(Nb_{0.96}Sb_{0.04})O_3$ ceramics were fabricated using conventional mixed oxide method and their piezoelectric and dielectric properties were investigated as a function of the amount of KCN addition. With increasing the amount of KCN addition, density and mechanical quality factor(Qm), electromechanical coupling factor (Kp) were increased up to 1.2mol% and then decreased. At the 1.2mol% KCN added specimen, mechanical quality factor (Qm), electromechanical coupling factor (Kp), density and dielectric constant (${\varepsilon}r$) showed the optimal values of 781, 0.445, $4.42g/cm^3$ and 443, respectively, for piezoelectric transformer application.

• New & Renewable Energy
• /
• v.17 no.4
• /
• pp.36-45
• /
• 2021

To remove the Cu secondary phase remaining on the surface of a CIGSSe absorber layer manufactured by the two-step process, KCN etching was applied before depositing the CdS buffer layer. In addition, it was possible to increase the conversion efficiency by air annealing after forming the CdS buffer layer. In this study, various pre-treatment/post-treatment conditions wereapplied to the S-containing CIGSSe absorber layerbefore and after formation of the CdS buffer layer to experimentally confirm whether similareffects as those of Se-terminated CIGSe were exhibited. Contrary to expectations, it was noted that CdS air annealing had negative effects.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.50.1-50.1
• /
• 2011

Lead-free ceramics with a composition of 0.55 mol%$K_4CuNb_8O_23-(K_{1-x}Na_x)NbO_3$ (KCN-KNNx) where $0.45{\leq}x{\leq}0.60$ were synthesized by conventional ceramic processing. Results revealed that the addition of Na was effective in changing the microstructure and relative density of KCN-KNNx. Further, the addition of Na resulted in a slight shift of the phase transition temperatures (To-t and Tc) toward low values. A high mechanical quality factor (Qm) of 1850 was found atx=0.54, which might be due to the build-up of an internal bias field (Ei) within KCN. Thermal hysteresis in KNNx was confirmed with an increase in the Na content during the heating and cooling cycles, resulting from structural changes. Thus, KCN-KNNx with x=0.54 exhibits excellent piezoelectric properties with d33 (97 pC/N), kp (36%), and Qm (1850), being promising candidates for application in high-power piezoelectric devices.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.11
• /
• pp.930-934
• /
• 2009

In this study, in order to develop excellent lead-free composition ceramics for piezoelectric transformer, ($K_4CuNb_8O_{23}$) added $(K_{0.5}Na_{0.5})(Nb_{0.96}Sb_{0.04})O_3$ ceramics were fabricated using conventional mixed oxide method and their piezoelectric and dielectric properties were investigated as a fu+EY50nction of the amount of KCN addition. With increasing the amount of KCN addition, density and mechanical quality factor(Qm), electromechanical coupling factor (Kp) were increased up to 1.2 mol% and then decreased. At the 1.2 mol% KCN added specimen, mechanical quality factor (Qm), electromechanical coupling factor (Kp), density and dielectric constant (${\varepsilon}r$) showed the optimal values of 781, 0.445, $4.42\;g/cm^3$ and 443, respectively, for piezoelectric transformer application.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.3
• /
• pp.126-129
• /
• 2010

(1-X) $(Na_{0.5}K_{0.5})NbO_3-X$ $K_4CuNb_8O_{23}$ (NKN-X KCN) ceramics were produced using the conventional solid state sintering method, and their sinterability and electric properties were investigated. The density, dielectric constant (${\varepsilon}_r$), piezoelectric constant $d_{33}$, electromechanical coupling factor $k_p$ and mechanical quality factor $Q_m$ value of the NKN ceramics depended upon the KCN content and the sintering temperature. In particular, the KCN addition to the NKN greatly improved the mechanical quality factor $Q_m$ value. The ceramic with X = 2.0 mol% sintered at $1,150^{\circ}C$ possesses the optimum properties (${\varepsilon}_r=241$, $d_{33}=78$, $k_p=0.34$ and $Q_m=1,121$). These results indicate that the ceramic is a promising candidate material for applications in lead free piezoelectric transformer and filter materials.

• Journal of Plant Biology
• /
• v.25 no.2
• /
• pp.65-72
• /
• 1982

The oxygen consumption of fresh and aged slices of potato tuber was 40.6 and 168.0 ,$0_2$ $\mu$l/g fr $wt{\cdot}h$, respectively. After initial burst of oxygen consumption within 2 minutes(i.e., 40% for fresh and 12% for aged slices) in the treatmentof $50{\mu}M$ alantolactone, gradual decrease of respiration rate was observed during 3 hours of incubation. In case of the aged slices the initial burst of oxygen consumption was not observed by salicylhydroxamic acid (SHAM) or KCN. The combined effect of SHAM and alantolactone showed increase of 12%, while SHAM and KCN combination showed 60% decrease. In addition, the lipophilicity of cell membrane of onion inner epidermis was increased by lantolactone treatment. The results suggest that the primary effect of alantolactone on the cellular respiration may be associated with an alteration of lipophilic phase of cell membrane and a consequent increase of electron flow throuh the cytochrome system.

• The Korean Journal of Mycology
• /
• v.30 no.2
• /
• pp.113-118
• /
• 2002

A Carboxymethyl Cellulase (CMCase) has been isolated and purified from the edible mushroom, Stropharia rugosoannulata. The molecular weight of CMCase was estimated to be 54 kDa by SDS polyacryl amide gel electrophoresis. The maximum activity of the purified CMCase was observed at pH 4.0 and $40^{\circ}C$, and stable for pH 3.0 to 11.0 to maintain 40% activity. The CMCase activity was activated by $AgNO_{3},\;MgSO_{4},\;and\;KCl$. However, its activity was inhibited by 1,10-phenanthroline, KCN and L-cysteine. Also, the enzyme activity was decreased by the addition of EDTA, suggesting that the purified CMCase is metalloenzyme.

• Korean Journal of Veterinary Research
• /
• v.40 no.2
• /
• pp.267-274
• /
• 2000

Since intracellular free $Mg^{2+}$ ($[Mg^{2+}]_i$) appears to be tightly regulated following cellular energy depletion, we hypothesized that the increase in $[Mg^{2+}]_i$ would result in $Mg^{2+}$ extrusion into circulation. Extracellualr $Mg^{2+}$ contents ($[Mg^{2+}]_o$) were measured in rat erythrocytes, the perfused heart and liver, and plasma in the anesthetized rat. Animals were injected intraperitoneally with sodium nitrite ($NaNO_2$) and plasma $Mg^{2+}$ was measured after the injection and then 10 and 20 minutes later. An increase in circulating (plasma) $Mg^{2+}$ ($[Mg^{2+}]_c$) and methemoglobin was observed in animals injected with $NaNO_2$ (30 mg/Kg). The time course of the effects demonstrated that $[Mg^{2+}]_c$ and methemoglobin continued to increase 10 minutes after the $NaNO_2$ injection. Under these conditions, there was a sustained increase in $[Mg^{2+}]_c$, but not in methemoglobin, which was inhibited by pretreatment with potassium cyanide (KCN, 4 mg/Kg), indicating that an increase in $[Mg^{2+}]_c$ was accompanied by ATP depletion. Injection of rotenone (0.9 mg/Kg) or 2,4-dinitrophenol (15 mg/Kg) also induced an increase in $[Mg^{2+}]_c$. Reduced respiration rate from 100/min to 10/min during 30 minutes also caused a time-dependent rise in $[Mg^{2+}]_c$. These increase in $[Mg^{2+}]_c$ were inhibited by pretreatment with KCN. In addition, ATP depletion by $NaNO_2$ or KCN sustainedly increased the $[Mg^{2+}]_o$ in rat erythrocytes. $Mg^{2+}$ efflux was stimulated by KCN in the perfused heart and liver, but not by $NaNO_2$. These results suggest that the activation of $Mg^{2+}$ effluxes into the circulation is directly dependent on the ATP depletion-induced increase in $[Mg^{2+}]_i$ and heart, liver and erythrocytes have a major pool of $Mg^{2+}$ that can be mobilized upon cellular energy state.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.77-77
• /
• 2009

$Pb(Zr,Ti_O_3$계 세라믹스는 우수한 압전 특성으로 인하여 압전변압기 및 액츄에이터, 센서 등 많은 분야에 응용이 되어져 왔다. 그러나, 최근 들어 $1000^{\circ}C$에서 급속도로 많은 휘발을 하는 PbO는 환경 및 인체에 나쁜 영향을 미칠 뿐 아니라 사용 후의 처리도 어려워 선진국에서는 사용을 제한하거나 줄이고 있는 추세에 있다. 따라서, PbO를 포함하지 않은 무연 (Lead-free)계 압전 세라믹스에 대한 연구가 많은 관심을 끌고 있으며 앞으로는E 장래성 있는 하나의 이슈 분야가 될 것이다. 이러한 Pb-based System 세라믹스를 대체 할 재료로서 $(Bi_{1/2}Na_{1/2})TiO_3$나 Tungsten-Bronze type, $(K_{1/2}Na_{1/2})NbO_3$ 등이 주로 연구가 되고 있다. 특히, alkali niobate를 기초로 한 $(K_{1/2}Na_{1/2})NbO_3(NKN)$은 무연 압전 물질로서 많은 주목을 받고 있다. 그러나, NKN의 주요 성분인 K 의 높은 조해성 때문에 일반적인 고상방법으로는 고 밀도의 세라믹을 얻기 힘들뿐더러 낮은 상전이 온도 때문에 많은 응용에는 제약이 되고 있다. 이러한 세라믹의 단점을 보완하고자 Hot forging, RTGG, SPS 등 과 같이 특수한 소결방법을 사용하여 고밀도의 세라믹을 제작하지만 이 방법들은 제품 대량 생산에 있어 경제적으로나 복잡한 제조과정을 고려할 때 매우 비효율적이라고 판단된다. 그러므로 $BaTiO_3$, $LiTaO_3$, Mg, Ca등을 첨가 시켜 소결을 향상시키고 고밀도를 얻기 위해 많은 연구가 진행 중이다. 따라서 본 연구에서는 Pb-based계의 세라믹스를 대체할 우수한 특성의 세라믹스를 제작하고자 기존의 $(K_{1/2}Na_{1/2})NbO_3(NKN)$세라믹스에서 낮은 용융온도 때문에 소결하기 어려운 $KNbO_3$를 제거한 $NaNbO_3$에 $LiNbO_3$와 $BaTiO_3$를 추가한 $NaLiNbO_3-BaTiO_3$세라믹스에 $K_4CuNb_8O_{23}$(KCN)을 첨가함으로서 이에 따른 압전 및 유전 특성을 조사하였다.

• BMB Reports
• /
• v.30 no.2
• /
• pp.150-156
• /
• 1997

Tyrosinase was purified from Solanum melongena by ammonium sulfate precipitation, Sephadex G-150 and DEAE-Sephacel column chromatography. The molecular weight of the purified tyrosinase was approximately 88,600 daltons with 805 amino acid residues. The amino acid composition showed the characteristic high contents of glycine, glutamic acid and serine residues. The enzyme had high substrate specificity towards (+)-catechin. The $K_m$, value for L-DOPA was 20.8 mM. L-ascorbic acid, ${\beta}-mercapto-ethanol$, sodium diethyldithiocabamate, KCN and $NaN_3$ had strong inhibitory effects on enzyme activity. Sodium diethyldithiocabamate was a competitive inhibitor of the enzyme with a $K_i$ value of $5.2{\times}10^{-2}\;mM$. The optimum pH of the enzyme was 9.0 and the optimum temperature was $65^{\circ}C$ with L-DOPA as a substrate. In addition, the activity was enhanced by addition of $Ca^{+2}$ or $Cu^{+2}$, but decreased in the presence of $Fe^{2+},Fe^{3+}$ and $Zn^{2+}$ ions.