• 에너지공학
• /
• 제20권3호
• /
• pp.252-258
• /
• 2011

Nickel fiber mat was investigated as a potential structured catalyst for steam reforming of biogas in the temperature range of $600-700^{\circ}C$. The activity of as-received catalyst was very low owing to the smooth surface of fibers. Pretreatment of the catalyst by oxidation followed by reduction under methane partial oxidation condition significantly improved the catalytic activity, although degradation of the activity was found during the reaction due to oxidation and sintering. This deactivation was retarded by supplying additional hydrogen in the inlet gases or by coating $CeO_2$ over the catalyst surfaces.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권3호
• /
• pp.252-255
• /
• 2014

In the case of long-stator linear drives, unlike rotative drives for which speed or position sensors are a single unit attached to the shaft, these sensors extend along the guideway. The position signal transmitted from maglev vehicle can't meet the need of the real-time propulsion control. In this paper the position estimator for propulsion inverter driving long stator linear synchronous motor (LSLSM) in high speed maglev train is proposed. In order to get the higher resolution of the position information transmitted from vehicle, Full order state observer is proposed for position estimator.

• 한국재료학회지
• /
• 제15권4호
• /
• pp.252-256
• /
• 2005

We removed the bluish of the natural ruby successfully by vacuum annealing, and measured the color evolution with annealing time and temperature. We varied the anneal temperature and time $800\~1500^{\circ}C$ and $3\~26$ hrs, respectively. The color evolution of rubies with annealing condition was recorded by a digital camera and a color coordination visible spectrometer. We determined the optimum bluish eliminating annealing condition was $1500^{\circ}C-3hr$, which conserving the natural inclusions. We suggest the bluish shrink with diffusion coefficient of $D=(5\times10^{-3}){\exp}(-200.000/RT)[cm^2/s]$. We propose the color of ruby may be determined as the identical red color if the color difference between two samples are less than 1.0, and the color difference nay be an auxiliary standard to evaluate the color of rubies.

• Journal of information and communication convergence engineering
• /
• 제12권4호
• /
• pp.252-256
• /
• 2014

Traditional block cipher Advanced Encryption Standard (AES) is widely used in the field of network security, but it has high overhead on each operation. In the 15th international workshop on information security applications, a novel lightweight and low-power encryption algorithm named low-power encryption algorithm (LEA) was released. This algorithm has certain useful features for hardware and software implementations, that is, simple addition, rotation, exclusive-or (ARX) operations, non-Substitute-BOX architecture, and 32-bit word size. In this study, we further improve the LEA encryptions for cloud computing. The Web-based implementations include JavaScript and assembly codes. Unlike normal implementation, JavaScript does not support unsigned integer and rotation operations; therefore, we present several techniques for resolving this issue. Furthermore, the proposed method yields a speed-optimized result and shows high performance enhancements. Each implementation is tested using various Web browsers, such as Google Chrome, Internet Explorer, and Mozilla Firefox, and on various devices including personal computers and mobile devices. These results extend the use of LEA encryption to any circumstance.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.252-252
• /
• 2006

Utilizing the existence of the induction period in photo-polymerization, we propose a new injection method of photo-polymerizable, thermocrosslinking hydrogels made of di-acrylated Pluronic F127 (DA-PF127). This method can solve the problem of fast dissolution of thermal gelation as a scaffold and the disadvantages of the existing injection method that photo-polymerize di-acrylated Pluronic polymer after injection using optical fiber. Injectable gelation of DA-PF127 by the proposed method was demonstrated both in vitro and in vivo. The enhanced stability by this novel photo-polymerization strategy was confirmed by the more sustained release of loaded protein as well as the prolonged degradation time of the hydrogels.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2016년도 추계학술발표대회
• /
• pp.252-253
• /
• 2016

가상머신을 탐지하는 기법을 이용하여 현재 프로그램이 동작하는 플랫폼과 운영환경을 알아내는 방법을 제안한다. 가상머신 탐지기법으로 데렉 소더(Derek Soeder, eEye Digital Security)를 사용한다. 이 기법은 예외 명령어를 이용해 프로그램이 가상머신과 네이티브머신 환경에서 작동중인지 알아낸다. 가상머신의 코드 세그먼트 레지스트 영역은 네이티브머신보다 불명확 하다. 이런 메모리 주소체계의 차이를 이용한 가상머신탐지 기법이다. 더 응용하여 프로그램의 작동환경이 디버거(인텔 Pin, Olly dbg)인지 가상머신(VMware, QEMU)인지 혹은 네이티브머신(os: windows7 sp3)인지 구분하는 방안을 제안한다.

• 대한화학회지
• /
• 제57권2호
• /
• pp.252-259
• /
• 2013

A green and simple method to synthesize of 1,4-diketones via aldol reaction of arylglyoxals and ketones such as 1-(4-methoxyphenyl)-2-propanone, deoxybenzoin and substituted acetophenones in the presence of a catalytic amount of DABCO in water at room temperature has been reported. Corresponding 2-hydroxy-1,4-diones were obtained in moderate to high yields with simple separation of obtained solid from reaction mixture and recrystallization.

• 대한기계학회논문집A
• /
• 제21권2호
• /
• pp.252-260
• /
• 1997

In this paper, a friction compensation method using a disturbance observer is proposed for an impedance control of pneumatic manipulator. It is assumed that the generated torque by a pneumatic actuator can be estimated based on the pressure signals and the discharge volume. In order to improve the dynamic characteristics of the pneumatic actuator driven by meter out method, we construct the inner torque control system by feeding back the generated torque. In order to reduce the influence of disturbances comprising friction torque and parameter variations of plant, the impedance control system is constructed with a disturbance observer which estimates the disturbances based on the generated torque of pneumatic actuator, the angular velocity and the reaction torque. From some experiments, it is confirmed that the proposed control system is effective to improve the robustness for the friction torque in the impedance control of a pneumatic manipulator.

• Carbon letters
• /
• 제12권4호
• /
• pp.252-255
• /
• 2011

Carbon-based electric double-layer capacitors are being evaluated as potential energy-storage devices in an expanding number of applications. In this study, samples of carbon black (CB) treated at different temperatures ranging from $650^{\circ}C$ to $1100^{\circ}C$ were used as electrodes to improve the efficiency of a capacitor. The surface properties of the heat-treated CB samples were characterized by X-ray photoelectron spectroscopy and X-ray diffraction. The effect of the heat-treatment temperature on the electrochemical behaviors was investigated by cyclic voltammetry and in galvanostatic charge-discharge experiments. The experimental results showed that the crystallinity of the CBs increased as the heat-treatment temperature increased. In addition, the specific capacitance of the CBs was found to increase with the increase in the heat-treatment temperature. The maximum specific capacitance was 165 $F{\cdot}g-1$ for the CB sample treated at $1000^{\circ}C$.

• 대한기계학회논문집B
• /
• 제25권2호
• /
• pp.252-259
• /
• 2001

Computational study has been performed to observe the flow characteristics of combustion chamber for geometrical modification in municipal solid waste incinerator. A series of geometrical modification has been carried out as an attempt to reduce the size of recirculation zone, to obtain uniform flow field in the secondary combustion chamber and to improve the mixing of combustion gas. Two dimensional non-reacting turbulent flow has been studied as the first step to get such goals and the result of design optimization is presented. In addition, three dimensional non-reacting and reacting flow analyses were performed to verify the validity of two dimensional approach.