• Environmental Engineering Research
• /
• v.14 no.2
• /
• pp.95-101
• /
• 2009

Natural gas is a promising alternative fuel of internal combustion engines. In this paper, the combustion and emission characteristics were investigated on a natural gas engine at two different fuel injection timings during the intake stroke. The results show that fuel injection timing affects combustion processes. The optimum spark timing (MBT) achieving the maximum indicated mean effective pressure (IMEP) is related to fuel injection timing and air fuel ratio. At MBT spark timing, late fuel injection timing delays ignition timing and prolongs combustion duration in most cases. But fuel injection timing has little effect on IMEP at fixed lambdas. The coefficient of variation (COV) of IMEP is dependent on air fuel ratio, throttle positions and fuel injection timings at MBT spark timing. The COV of IMEP increases with lambda in most cases. Late fuel injection timings can reduce the COV of IMEP at part loads. Moreover, engine-out CO and total hydrocarbon (THC) emissions can be reduced at late fuel injection timing.

• Journal of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.673-679
• /
• 1991

The electrochemical reduction of N-tert-butylbenzothiazole-2-sulfenamide (TBBS; vulcanization accelerator) was investigated by direct current, differential pulse polarography, cyclic voltammetry and controlled potential coulometry. The electrode reduction of TBBS proceeded E-C-E-C reaction mechanism by four electrons transfer at irreversible one wave (-2.31 volts vs. Ag/0.1M AgN$O_3$ in AN). As the results of controlled potential electrolysis, mercaptobenzothiazole (MBT), benzothiazole disulfide (MBT dimer) and extricated sulfur were products which followed by cleavage of the sulfenamide (-S-N=) bond. Upon the basis of products analysis and polarogram interpretation with pH variable, electrochemical reaction mechanism was suggested.

• Journal of fish pathology
• /
• v.20 no.2
• /
• pp.179-187
• /
• 2007

Hydrolysis compound of cactus of opuntia genus, Opuntia ficus-indica var. saboten Makino, has predominant anti-bacterial, anti-fungal effects. In this study, we wont to know a preventive effects of bacterial disease on cultured flounder using the compound (MBT-01108), and physical and physiological responses of those fishes were examined additionally. The MBT-01108 shown any side effect on physical, hematological and histological conditions of fishes. Immunologically, CL (chemiluminescense) response were appeared at MBT-01108 (0.1%) feeding group for 4 weeks. The results of comparative livability at a experimental infection with E.tarda and S.iniae were 82.5% and 13.5% at 4 weeks MBT (0.1%) feeding group.

• The korean journal of orthodontics
• /
• v.50 no.6
• /
• pp.401-406
• /
• 2020

Objective: To investigate and compare the slot sizes and parallelism of metal injection molding (MIM) and computerized numerical control (CNC) brackets. Methods: The following four MIM bracket series with 0.022-inch (in) slots were selected for investigation: Di MIM mini Twin (Ortho Organizers), Mini Diamond Roth (Ormco), Gemini MBT (3M Unitek), and Formula R Roth (Tomy). The following four CNC bracket series with 0.022-in slots were selected for investigation: Econoline MBT (Adenta), Legend mini MBT (GC Orthodontics), Crown mini MBT (Adenta), and Evolve MBT (DB Orthodontics). The slot dimensions were measured using an optical microscope (XTCam-D310M; Mitutoyo) with a resolution of 1 ㎛. The results were statistically analyzed using one-way analysis of variance and the Tukey post-hoc test with a significance level of 0.05. Results: The results indicated that all the investigated slot sizes were oversized with respect to the manufacturers' specifications (0.022 in). Among the eight bracket series, the Di MIM bracket (MIM) was the most oversized by 10.4%, whereas the Evolve bracket (CNC) was the least oversized by 2.6%. The slots in seven of the bracket series had divergent walls instead of parallel ones. The Evolve bracket alone had parallel slot walls. Conclusions: Regardless of the manufacturing method, all the slot sizes of the brackets investigated in this study were significantly oversized; most of the slot walls were nonparallel, except for those of the Evolve bracket. This study could not establish that the CNC method was more accurate than the MIM method in manufacturing bracket slots.

• Journal of Environmental Science International
• /
• v.14 no.12
• /
• pp.1141-1153
• /
• 2005

Butyltin compounds (BTs), namely tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT), were measured in surface and core sediments collected in 2001 inside Seogwipo Harbor, in order to evaluate their distribution characteristics. Seogwipo Harbor is one of major harbors of Jeju Island where a lot of shipping occurs and is designated as a trade port by the Korea Maritime and Port Law. BTs were detected in surface and core sediments of all stations and their concentrations in surface sediments were low, compared with to those in other sites of domestic and foreign countries. The main species among BTs was MBT, although there was a little difference with a survey site in surface sediments and in core sediments with depth. No or low correlations were obtained between organic matter or particles size of surface and core sediments and total BTs, indicating that these factors did not affect the distribution of BTs. It was estimated that more complex factors including BTs loads and surrounding sedimentary environments, affect the distribution of BTs. The high correlations between BTs indicated that DBT and MBT were mainly degraded from TBT based on antifouling paints of vessel etc. and other sources, such as DBT and MBT, could be ignored. The butyltin degradation indices ([DBT]+[MBT]/[TBT]) in surface sediments were in the range of $2.0\~3.8$ (mean 3.0), indicating that the parent compound, TBT, were inflowed into the surface sediments a long years ago, degraded and deposited. The sedimentation age of BTs contaminated core sediments could not estimated because the content of $^{210}pb$ activity were nearly all the same and so the sedimentation rate could not obtained.

• Archives of Pharmacal Research
• /
• v.27 no.11
• /
• pp.1147-1153
• /
• 2004

Bladder cancer is a common cancer with high risk of recurrence and mortality. Intravesicle chemotherapy after trans-urethral resection is required to prevent tumor recurrence and progression. It has been known that antioxidants enhance the antitumor effect of bacillus Calmette-Guerin (BCG), the most effective intravesical bladder cancer treatment. Capsaicin, the major pungent ingredient in genus Capsicum, has recently been tried as an intravesical drug for overactive bladder and it has also been shown to induce apoptotic cell death in many cancer cells. In this study, we investigated the apoptosis-inducing effect and alterations in the cellular redox state of capsaicin in MBT-2 murine bladder tumor cells. Capsaicin induced apoptotic MBT-2 cell death in a time- and dose-dependent manner. The capsaicin-induced apoptosis was blocked by the pretreatment with Z-VAD-fmk, a broad-range caspase inhibitor, or Ac-DEVD-CHO, a caspase-3 inhibitor. In addition to the caspase-3 activation, capsaicin also induced cytochrome c release and decrease in Bcl-2 protein expression with no changes in the level of Bax. Furthermore, capsaicin at the concentration of inducing apoptosis also markedly reduced the level of reactive oxygen species and lipid peroxidation, implying that capsaicin may enhance the antitumor effect of BCG in bladder cancer treatment. These results further suggest that capsaicin may be a valuable intravesical chemotherapeutic agent for bladder cancers.

• Journal of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.680-688
• /
• 1991

The electrochemical reduction of N-oxyldiethylenebenzothiazole-2-sulfenamide (ODBS; vulcanization accelerator) was investigated by direct current polarography, differential pulse polarography, cyclic voltammetry and controlled potential coulometry. The irreversible electrode reduction of ODBS proceeded E-C-E-C reaction mechanism by three electrons transfer with irreversible one wave (-1.86 volts vs. Ag/0.1 M AgN$O_3$ in AN). As the results of controlled potential electrolysis, mercaptobenzothiazole (MBT), benzothiazole disulfide (MBT dimer) and extricated sulfur were products which followed by cleavage of the sulfenamide (-S-N=) bond. Upo the basis of products analysis and polarogram interpretation witli pH variable, electrochemical reaction mechanism was suggested.

• Journal of the Korean Society of Systems Engineering
• /
• v.1 no.2
• /
• pp.34-42
• /
• 2005

Logistic Support Analysis(LSA) and Logistic Supportability Review must be carried out as soon as possible in development stage in order to minimize operation/maintenance cost that head the list of weapon cost and improve logistic supportability of the weapon system. And the result must be used for hardware designs to set up to be able to input to the system design and logistic support elements. Therefore Logistic Support Elements must be planed/developed/supplied with the main combat system concurrently and performance and logistic supportability of the comabat system had better be improved mutually. This report describes maintenance concept changes of weapon systems, fault diagnosis function and test equipment state on the domestic MBT(main battle tank). And then it presents application and intensification of itself fault diagnosis system for a domestic future MBT considering connection with IETM(Interactive Electronic Technical Manual) and TE(Test Equipment).

• Journal of the Korean Society of Safety
• /
• v.34 no.6
• /
• pp.1-6
• /
• 2019

Carbon fiber has excellent specific strength, corrosion resistance and heat resistance. And p-Aramid fiber has high toughness and heat resistance and high elasticity, and is used in various fields such as industrial protective materials, bulletproof helmets and vests, as well as industrial fields. However, carbon fiber is relatively expensive, and is susceptible to brittle fracture behavior due to its low fracture strain. On the other hand, the aramid fiber tends to decrease in elastic modulus and strength when applied to the epoxy matrix, but it is inexpensive and has higher elongation and fracture toughness than carbon fiber. Thus the twill hybrid carbonaramid fiber reinforced composite laminate composite was investigated for a delamination fracture toughness under Mode I loading by 2 kinds of MBT and MCC deduction. The specimen was fabricated with 20 hybrid fabric plies. The initial crack was made by inserting the teflon tape in the center plane with a₀/W=0.5 length. The results show that SERR(Strain Energy Release Rate) as the critical and stable delamination fracture toughness were 0.09 kJ/㎡, 0.386 kJ/㎡ by MBT deduction, and 0.192 kJ/㎡, 0.67 kJ/㎡ by MCC deduction, respectively.

• Korean Journal of Environmental Biology
• /
• v.21 no.2
• /
• pp.164-169
• /
• 2003

Organotins are widely used organometals in various agricultural and industrial purposes. After introduction of these chemicals to the aquatic environment, they are degraded by abiotic and biotic precesses. The triorganotin compounds are sequentially degraded to di-organotin, mono-organotin and then finally inorganic tin. Although the effects of trialkyltin an marine organisms have been intensively studied, little has been known on plankton as a producer of ecosystem. In this paper, the toxicities of dibutyltin (DBT), monobutyltin (MBT), diphenyltin (DPT), monophenyltin (MPT), trimethyltin (TMT) and dimethyltin (DMT) to rotifer Brachionus plicatilis were measured, and their potencies were compared based on 96 hr-$LC_{50}$ value. The results showed that DPT (13.8 ppb) was the highest toxic, which was followed by TMT (42.9), DBT (80.6), MPT (262.2), MBT and DMT (>1,000) in order. Thus, in tri- and diorganotins, the toxicity was observed phenyltins > butyltins > methyltins, and in mono-organotins phenyltins was more toxic than butyltins. Considering the order of 96 hr--$LC_{50}$ with octanol-water eoefficients ($K_{ow}$) in organotins together, it was considered that the toxicity of organotins seems to be related to the lipophilicity of the compounds.