• Journal of Korean Society of Water and Wastewater
• /
• v.37 no.6
• /
• pp.347-361
• /
• 2023

Water utilities are making various efforts to reduce water losses from water networks, and an essential part of them is to recognize the moment when a pipe burst occurs during operation quickly. Several physics-based methods and data-driven analysis are applied using real-time flow and pressure data measured through a SCADA system or smart meters, and methodologies based on machining learning are currently widely studied. Water utilities should apply various approaches together to increase pipe burst detection. The most intuitive and explainable water balance method and its procedure were presented in this study, and the applicability and detection performance were evaluated by applying this approach to water supply pipelines. Based on these results, water utilities can establish a mass balance-based pipe burst detection system, give a guideline for installing new flow meters, and set the detection parameters with expected performance. The performance of the water balance analysis method is affected by the water network operation conditions, the characteristics of the installed flow meter, and event data, so there is a limit to the general use of the results in all sites. Therefore, water utilities should accumulate experience by applying the water balance method in more fields.

• Proceedings of the Korean Sanitation Conference
• /
• 2006.11a
• /
• pp.43-56
• /
• 2006

• Journal of Korean Society on Water Environment
• /
• v.22 no.3
• /
• pp.386-396
• /
• 2006

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.4
• /
• pp.459-468
• /
• 2015

Deposits discharged through the cleaning mainly were cement mortar, bitumen paintings and rust pieces, and fragments of perforation, stones and gravels. Deposits were more removed through swabbing pig cleaning rather than air scouring cleaning on the whole. However, air scouring cleaning were not influenced by the constraint conditions such as a change in the diameter or the presence of the valve in water mains compare to swabbing pig cleaning. So, it was thought that air scouring cleaning might be more favorable to water distribution network cleaning in the future. After the cleaning, water quality including residual chlorine and turbidity also was improved because of the removal of a significant amount of the deposits. Therefore, if the cleaning is continuously and regularly implemented in water mains, it is expected that it will help to recover the reliability and to preserve the health of water quality.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.3
• /
• pp.361-372
• /
• 2012

In order to establish the methodology for estimating an emergency drinking water supply in Korea, overseas cases and accidents history of cutting off water supply were investigated, and questionnaire was conducted. Investigating accidents history of cutting off water supply in Korea, actual cutting off times of most cases were less than 13hours. Also, cases related with water quality and facility failure have been not enough to derive useful information for estimating an emergency water. From the results of questionnaire and cross-tabulation analysis, about 1,066 lpcd(liter per capita${\cdot}$day) as an emergency water and 14 days as tolerable outages time could be estimated. The results of water quality simulation could tell us that it might take 5-16 days for pollutant matter to travel from 15 contamination points to source water intake point in the selected reservoir(D-dam). This travel time was in good accordance with the estimated tolerable outage time, 14days.

• Water for future
• /
• v.52 no.6
• /
• pp.33-37
• /
• 2019

• Journal of Korea Water Resources Association
• /
• v.43 no.7
• /
• pp.625-633
• /
• 2010

An integrated water resources management is highly required to use efficient water and preserve water quality due to the limits of water resources development and water pollution. K-WEAP was developed, which supports the water resources planning and evaluation within a fully integrated interactive system. In this study, we present three applications of K-WEAP. First, we examined the usefulness of K-WEAP as a water resources planning tool through its application to the National Water Resources Plan. Second, the conjunctive use of surface water and groundwater in the Geum river basin with K-WEAP was evaluated, and its results show how to support to set up a sustainable groundwater management plan. Finally, we confirmed the function of the integrated water quantity and quality management in K-WEAP, which conducted by comparing the simulated results of water quality in both QUAL2E and K-WEAP.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.284-287
• /
• 2022

In order to respond to the complexity and uncertainty of water management due to the climate crisis, K-water established a digital twin water management platform based on our experience in operating ICT infrastructure such as hydrological data sensing and high-quality data management and water management capabilities. In this platform, data from related organizations and real-time observation data in the basin are displayed on 3D topographic domain. Also it is configured to support optimal decision-making through simulation for various situations, displaying and analyzing results, and feedback on them. It is completed to establish the platform for Sunjim river basin. Based on this technologies and experience, K-water is planning to expand this digital twin to 5 major rivers in Korea. Through this, it plans to build comprehensive decision-making system for efficient water management considering various conditions in entire basin. Also it aims to create a new water industrial ecosystem and contribute to secure technological competitiveness cooperating with private companies.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.4
• /
• pp.441-451
• /
• 2014

The flushing is important to maintain good water quality in water main. It is a technique of using water velocity to remove sediments in water distribution system. The variety of water quality problems can occur in a distribution system, so too can a variety of benefits be gained by system flushing. In order to effectively perform the flushing, the contaminants to be removed to set up and it can be solved, it is necessary to ensure the proper flow rate. In this study, the removal of contaminants present in the inner water pipe attached loose deposits such as fine particles of granular activated carbon, sand and iron corrosion product sought to derive flow rates. Thus, the constant observation of using pilot plant scale water distribution plant for the movement of floating characteristics of particles were assessed.

• Water for future
• /
• v.51 no.11
• /
• pp.47-54
• /
• 2018