• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.6
• /
• pp.687-695
• /
• 2002

Media-specific FEC techniques, suggested to confront with VoIP speech packet loss, improve speech quality at the expense of generating additional one-frame delay. In this paper, we suggest new media-specific FEC, i.e, LSF FEC technique which is able to improve speech quality with much shortened additional delay. In the proposed technique, the LSF parameters of the future frame are utilized to recover a lost packet. To evaluate performance of the proposed technique, we use ITU-T G.723.1 and G.729 Codec and apply Gilbert packet loss model and estimate MOS per every packet loss rate using PESQ speech quality estimation algorithm. The proposed technique has effect of shortening delay over from 6.5ms to 27ms compared with existing media-specific FEC techniques. Simulation results for comparison of reconstructed speech quality show this novel technique improves the MOS over 0.1 in practical lossy environment of 5 % packet loss rate.

• Korean Journal of Microbiology
• /
• v.32 no.3
• /
• pp.215-221
• /
• 1994

The complete nucleotide sequence of the cloned pga gene encoding the penicillin G acylase of Bacillus megaterium ATCC 14945 and its 5'- and 3'-flanking regions was determined. The sequence revealed only one large open reading frame (2,406 hp) of the penicillin G acylase (pga) gene. Upstream from ATG of the pga gene, there was a putative ribosome binding site, Shine-Dalgarno sequence. The promoter-like structure, - 10 and - 35 sequences, was also found. Following the stop codon, TAG, a structure reminiscent of the E. coli rho-independent transcription terminator was present. The amino acid sequence was deduced from the nucleotide sequence. The molecular mass of the polypeptide was 91,983 Da. There was a potential signal sequence in its amino-terminal region. A comparison of its deduced amino acid sequence with other characterized penicillin G acylases and the result of SDS-polyacrylamide gel electrophoresis of the purified enzyme showed that a precursor polypeptide of 92 kDa was processed into two dissimilar ${\alpha}$ and ${\beta}$-subunits of 25 and 61 kDa.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.1
• /
• pp.97-102
• /
• 2008

For the use of salmon frame in zero emission, the snack using residues of salmon Gomtang was prepared and investigated on the food component characterization. According to the results of volatile basic nitrogen, water activity and sensory evaluation, the optimal substitution ratio of residues was 15% based on the mix. Total amino acid content was higher in the snack (14.8 g/100 g) with 15% residues than in snack (9.8 g/100 g) without residues. The major amino acids of the residues-added snack were aspartic acid (9.9%), glutamic acid (14.7%) and proline (9.5%). The snack with 15% residues were enriched in the mineral (calcium and phosphorus) and polyunsaturated fatty acid (20:5n-3 and 22:6n-3) compared to those of snack without residues.

• YAKHAK HOEJI
• /
• v.32 no.5
• /
• pp.313-318
• /
• 1988

Radioprotective ginseng protein fraction was isolated from Korean white ginseng and its cytotoxic effect on CHO-K1 cells was studied by the method of measuring the relative cell survival and total cellular protein content (FRAME method). When ginseng protein at the dose of 300, 600, 900, $1200{\mu}g/ml$ was treated to cells for 24 hrs, the relative survival was significantly decreased at the concentration of above $600{\mu}g/ml$, indicating the presence of cytotoxic effect of the protein at certain concentration. When cellular protein content was measured after ginseng protein at the dose of 300, 600, 900, $1200\;{\mu}g/ml$ was treated, the amount of cellular protein was significantly reduced at the concentration above $600{\mu}g/ml$ in the case of 24 hr treatment and at all concentrations including $300{\mu}g/ml$ in the case of 72 hr treatment. The data suggest that the protein may inhibit cell growth, resulting in the reduction of live cells in culture. $ID_{50}$ value which is the concentration of ginseng protein that reduces the total cellular protein content to 50% of the control was calculated as 2276.86 and $1323.32\;{\mu}g/ml$ in groups treated for 24 and 72 hr, respectively. Since $ID_{50}$ value of above $1000{\mu}g/ml$ indicates very weak cytotoxicity, the ginseng protein seems to exert very weak cytotoxic effect on CHO-K1 cells.

• Korean Journal of Microbiology
• /
• v.34 no.3
• /
• pp.115-119
• /
• 1998

We cloned the 4.8 kb BglII fragment containing genes downstream pHENX7 from Pseudomonas sp. strain DJ77. The restriction map of the resultant clone, recombinant plasmid pYCS500, was determined. Sequencing analysis of the 465 bp HindIII-ClaI fragment revealed an open reading frame of 282 bp that was then designated phnM. The deduced polypeptide is 93 amino acid residues long with a $M_r$ of 10,008. The PhnM has 37.3-53.9% identity with plant-type ferredoxin proteins such as NahT, XylT, DmpQ, AtdS, PhlG, PhhQ and TbuW and contains the motif similar to well-conserved functional domains of those proteins.

• Architectural research
• /
• v.15 no.4
• /
• pp.201-206
• /
• 2013

Special attention is required for the design of windows due to their high thermal vulnerability. This paper examines the problems that might arise in the application of the u-value, by reflecting the changes in the u-value of the window, depending on the window-to-wall ratio obtained in an energy demand analysis. Research indicates that the u-value of a window increases with an increase in the difference between the u-values of the frames and the glass. Relative to the changes in the u-value of the windows, the energy demand varied from 1.3% to 9.3%. Windows with a g-value of 0.3 or 0.5 displayed a higher energy demand than windows with a g-value of 0.7. Therefore, when the difference between the performance of the glass and the frame is significant, especially when the g-value is small, a modified heat transmission coefficient should be applied to the window size during the evaluation of the building energy demand.

• Korean Journal of Veterinary Research
• /
• v.35 no.2
• /
• pp.287-295
• /
• 1995

Molecular cloning and nucleotide sequencing were undertaken for the RNA genome of gp53 antigenic region in cytopathic Singer strain of bovine viral diarrhea virus. The cloned cDNA was 939 nucleotides in length having a base composition of 31.0% A, 19.6% C, 25.5% G and 24.0% T. The sequence was corresponded to approximately 77.8%(817 bases) of predicted gp53 region and 122 bases after 3'end of gp53 region in the Singer strain when compared with NADL strain of known sequence. A single open reading frame was found in the sequence of 2nd frame and was deduced as encoding 312 amino acids.

• Computers and Concrete
• /
• v.12 no.4
• /
• pp.393-411
• /
• 2013

In the analysis and design of reinforced concrete frames beam-column joints are sometimes assumed as rigid. This simplifying assumption can be unsafe because it is likely to affect the distributions of internal forces and moments, reduce drift and increase the overall load-carrying capacity of the frame. This study is concerned with the relevance of shear deformation of beam-column joints, in particular of exterior ones, on the quasi-static behavior of regular reinforced concrete sway frames. The included parametric studies of a simple sub-frame model reveal that the quasi-static monotonic behavior of unbraced regular reinforced concrete frames is prone to be significantly affected by the deformation of beam-column joints.

• Journal of Navigation and Port Research
• /
• v.29 no.1 s.97
• /
• pp.77-82
• /
• 2005

According as the quantity of goods transported by ship is increasing, a port environment is rapidly changing To meet this situation successfully, the development of the next generation port loading and unloading system(LMTT) is studied A Frame of shuttle car for LMTT(Linear Motor-based Transfer Technology) consists of three parts which are outer beam, inner beam and cross beam In this study, we carried out the finite element analysis for the effect of cross beam on the strength and stiffness of the frame according to the number of cross beam, loading position of container, the distance ratio of inner beam from center. The result is as follow ; When the load is applied on outer beam and inner beam concurrently and the number of cross beam is 5, that is the optimum condition in frame design.

• Earthquakes and Structures
• /
• v.6 no.1
• /
• pp.89-110
• /
• 2014

Nonlinear dynamic analyses are carried out to investigate the influence of the pinching hysteretic response of the exterior RC beam-column joints on the seismic behavior of multistory RC frame structures. The effect of the pinching on the local and global mechanisms of an 8-storey bare frame and an 8-storey pilotis type frame structure is evaluated. Further, an experimental data bank extracted from literature is used to acquire experimental experience of the range of the real levels that have to be considered for the pinching effect on the hysteretic response of the joints. Thus, three different cases for the hysteretic response of the joints are considered: (a) joints with strength and stiffness degradation characteristics but without pinching effect, (b) joints with strength degradation, stiffness degradation and low pinching effect and (c) joints with strength degradation, stiffness degradation and high pinching effect. For the simulation of the beam-column joints a special-purpose rotational spring element that incorporates the examined hysteretic options developed by the authors and implemented in a well-known nonlinear dynamic analysis program is employed for the analysis of the structural systems. The results of this study indicate that the effect of pinching on the local and global responses of the examined cases is not really significant at early stages of the seismic loading and especially in the cases when strength degradation in the core of exterior joint has occurred. Nevertheless in the cases when strength degradation does not occur in the joints the pinching may increase the demands for ductility and become critical for the columns at the base floor of the frame structures. Finally, as it was expected the ability for energy absorption was reduced due to pinching effect.