• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.669-672
• /
• 2001

Generally, previous converter is divided into two categories to get high power factor and good output regulation. These two categories can be combined a category with a main switch. These converter is called Single Stage PFC Converter. This approach has good electrical characteristics of high power factor and fast output voltage regulation. The cost and size are important factor to design the converter in low power system. Even single stage can reduce the size and cost, but this approach needs to have additional circuit like control, PWM circuit. To improve these demerits, Top switch is one of good choice In reduce and size in low power single stage converter. Because it has the ability of current limit, thermal protection, oscillator, control circuit as well as a main switch ability.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.12
• /
• pp.165-171
• /
• 2016

This study analyzes the relative importance of the introducing factors for the critical success factors in the implementation stage of the lifecycle of ERP system using Delphi technique and Analytic Hierarchy Process(AHP). In the 1st layer of the hierarchy, technical factor is evaluated as the most important factor among organizational, technical, and supplier factors. In the 2nd layer, choosing a proper ERP package is evaluated as the most important factor within 15 factors followed by process-oriented approach, technical suitability, minimized customization, integration and association of system with trading parter, association with legacy systems, and support and involvement of top management. As a result of this analysis enterprise should choose an ERP package that is suitable to its business environment, and make the best use of(take full advantage of) best practice that ERP package provides to optimize the existing business procedure or process(to approach the existing business procedure or process). This study also shows the range of customization of the features provided by the ERP package should be minimized.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.2
• /
• pp.34-39
• /
• 2003

Recent deepwater offshore structures in the Gulf of Mexico utilize butt welded tubular joints. Application of a welded tubular joint includes tendons, production risers, and steel catenary risers. Fatigue life assessment of these joints becomes more critical, as the structures to which they are attached are allowed to undergo cyclic and sometimes large displacements around an anchored position. Estimation of the fatigue behavior of these tubular members in the design stage is generally condrcted by using S-N curves, as specified in the codeds and standards. Applying the stress concentration factor of the welded structure to the S-N approach often results in a very conservative assessment, because the stress field acting on the tubular has a non-uniform distribution through the thickness. Fatigue life analysis using fracture mechanics has been applied in the design of the catenary risers. This technology enables the engineer to establish proper requirements on weld quality and inspection acceptance criteria to assure satisfactory structural integrity during its design life. It also provides guidance on proper design curves and a methodology for accounting for the effects of non-uniform stress distribution through the wall thickness. Still, there is inconsistency when designing tubular joints using a conventional S-N approach and when specifying weld flaw acceptance criteria using fracture mechanics approach. This study developed fatigue curves that are consistent with both the S-N approach and the fracture mechanics approach. Accounting for non-uniform stress distribution and threshold stress intensity factor were key parameters in relating both approaches. A series of S-N curves, generated from the fracture mechanics approach, were compared to the existing S-N curves. For flat plate butt joint, the S-N curve generated from fracture mechanics matches with the IIW class 100 curve when initial crack depth was 0.5 mm (0.02 ). The new curves for tubular joint agree very well with the experimental results. The comparison also indicated the degree of conservatism built into the API X design curve.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• v.6 no.1
• /
• pp.69-74
• /
• 2003

Recent deepwater offshore structures in the Gulf of Mexico utilize butt welded tubular joints. Application of a welded tubular joint includes tendons, production risers, and steel catenary risers. Fatigue life assessment of these joints becomes more critical, as the structures to which they are attached are allowed to undergo cyclic and sometimes large displacements around an anchored position. Estimation of the fatigue behavior of these tubular members in the design stage is generally conducted by using S-N curves, as specified in the codes and standards. Applying the stress concentration factor of the welded structure to the S-N approach often results in a very conservative assessment, because the stress field acting on the tubular has a non-uniform distribution through the thickness. Fatigue life analysis using fracture mechanics has been applied in the design of the catenary risers. This technology enables the engineer to establish proper requirements on weld quality and inspection acceptance criteria to assure satisfactory structural integrity during its design life. It also provides guidance on proper design curves and a methodology for accounting for the effects of non-uniform stress distribution through the wall thickness. Still, there is inconsistency when designing tubular joints using a conventional S-N approach and when specifying weld flaw acceptance criteria using fracture mechanics approach. This study developed fatigue curves that are consistent with both the S-N approach and the fracture mechanics approach. Accounting for non-uniform stress distribution and threshold stress intensity factor were key parameters in relating both approaches. A series of S-N curves, generated from the fracture mechanics approach, were compared to the existing S-N curves. For flat plate butt joint, the S-N curve generated from fracture mechanics matches with the IIW class 100 curve when initial crack depth was 0.5 mm (0.02). The new curves for tubular joint agree very well with the experimental results. The comparison also indicated the degree of conservatism built into the API X design curve.

• Journal of Power Electronics
• /
• v.15 no.3
• /
• pp.577-586
• /
• 2015

The combination of voltage feedforward and feedback control is a conventional approach for correcting the power factor in single-phase ac-dc boost converters. The feedback duty ratio increases significantly with an increase of the line frequency and input inductance. Therefore, the performance of the conventional approach is highly dependent on the bandwidth of the feedback controller. As a result, the input power quality can be significantly exacerbated due to uncompensated duty ratios if the feedback controller is limited. This paper proposes an input impedance and current feedforward control method to reduce the control portion of the feedback controller. The findings in this paper are 1) the theoretical derivation and analysis of variations of line frequency and input inductance on a power factor correction approach, 2) guaranteed consistent performance in a wide range of conditions, and 3) that a low switching frequency can be utilized by the proposed method. A MATLAB/Simulink model and a 1.2kW dual boost converter are built to demonstrate the effectiveness of the proposed method.

• Journal of Information Technology Applications and Management
• /
• v.18 no.3
• /
• pp.91-110
• /
• 2011

Korea professional baseball industry has grown to take the lion's share of the domestic sports industry, but still does not make break even. The purpose of this study is to examine the financial impact of adopting the Customer Relation Management (CRM) approach on the profitability of Korea professional baseball industry. We use a measuring tool called entropy used in ID3 decision tree algorithm. In the paper, we specify five the most important factors that affect spectator satisfaction based on the previous literature, perform survey analysis, calculate entropy values, and find the results. We predicted the change in revenues when we adopt CRM by checking the spectators' willingness to pay more when the conditions of each factor are improved. We find that we can reap significant fruits of the effect of CRM introduction through enhancing 'game content factor' and 'game promotion factor' among the five factors. We also find that we can increase the revenues of domestic professional baseball teams to 2.4 times or 2.1 times the current level if we manage intensively those two factors respectively. It is very surprising to see that the improvement in total revenues makes both ends meet for domestic professional baseball teams. This clearly demonstrates the effectiveness of CRM approach in improving the profitability of organizations.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.2
• /
• pp.111-117
• /
• 2017

This study analyzes the relative importance of the introducing factors for the critical success factors in the implementation stage of the lifecycle of ERP system using Delphi technique and Analytic Hierarchy Process(AHP). In the 1st layer of the hierarchy, technical factor is evaluated as the most important factor among organizational, technical, and supplier factors. In the 2nd layer, choosing a proper ERP package is evaluated as the most important factor within 15 factors followed by process-oriented approach, technical suitability, minimized customization, integration and association of system with trading parter, association with legacy systems, and support and involvement of top management. As a result of this analysis enterprise should choose an ERP package that is suitable to its business environment, and make the best use of(take full advantage of) best practice that ERP package provides to optimize the existing business procedure or process(to approach the existing business procedure or process). This study also shows the range of customization of the features provided by the ERP package should be minimized.

• Communications for Statistical Applications and Methods
• /
• v.12 no.1
• /
• pp.217-227
• /
• 2005

The data mining is a new approach to extract useful information through effective analysis of huge data in numerous fields. We utilized this data mining technique to analyze medical record of 35,671 people. Whole data were assorted by BMI score and divided into two groups. We tried to find out BMI risk factor from overweight group by analyzing the raw data with data mining approach. The result extracted by C5.0 decision tree method showed that important risk factors for BMI score are triglyceride, gender, age and HDL cholesterol. Odds ratio of major risk factors were calculated to show individual effect of each factors.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.2
• /
• pp.193-198
• /
• 2005

This paper proposes a new method to handle transmission line losses using loss distribution factors (LDF) rather than marginal loss factors (MLF) in electricity market operation. Under a competitive electricity market, the bidding data are adjusted to reflect transmission line losses. To date the most proposed approach is using MLFs. The MLFs are reflected to bidding prices and market clearing price during the trading and settlement of the electricity market. In the proposed algorithm, the LDFs are reflected to bidding quantities and actual generations/ loads. Computer simulations on a 9-bus sample system will verify the effectiveness of the algorithm proposed. Moreover, the proposed approach using LDFs does not make any payments residual while the approach using MLFs induces payments residual.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.161-166
• /
• 2002

The modification factor( k-factor) of equivalent damping ratio utilized in the current state-of-the-practice to account for the imperfection of reinforced concrete structures in hysteresis loop is investigated. From this, it is found that the current modification factor does not include the effect of cyclic loading, one of the important characteristic properties of earthquake loading. This could be taken into account by considering the energy absorption efficiency based on the cummulative plastic deformation. From the study, it is suggested that the current approach for the modification factor for the equivalent damping ratio should be reformed.