• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.309-316
• /
• 2003

In this paper, The statistical properties of ocean waves in the sea area of Hong-do, Korea are examined based on 1998-2002's wave data from a directional wave buoy. Wave data aquisition rate, mean wave heights, frequency of wave direction are summarized. Wave height and period scatter diagrams and n-years return period wave heights are estimated. Wave periods of maximum wave heights are also estimated. Large amplitude wave characteristics during the typhoon Prapiroon in 2000, Rusa in 2002 are also examined.

• International Journal of Reliability and Applications
• /
• 제5권1호
• /
• pp.1-13
• /
• 2004

It is recently well recognized that the technique for the one-sided stress wave velocity measurement in structural materials provides measurement in structural materials provides valuable information on the state of the material such as quality, uniformity, location of cracked or damaged area. This technique is especially effective to measure velocities of longitudinal and Rayleigh waves when access to only one surface of structure is possible. However, one of problems for one-sided stress wave velocity measurement is to get consistent and reliable source for the generation of elastic wave. In this study, the laser based surface elastic wave was used to provide consistent and reliable source for the generation of elastic wave into the materials. The velocities of creeping wave and Rayleigh wave in materials were measured by the one-sided technique using laser based surface elastic wave. These wave velocities were compared with bulk wave velocities such as longitudinal wave and shear wave velocities to certify accuracy of measurement. In addition, the mechanical properties such as poisson's ratio and specific modulus(E/p) were calculated with the velocities of surface elastic waves.

• 한국해양공학회지
• /
• 제32권5호
• /
• pp.393-401
• /
• 2018

This paper reports a novel mobile-type wave energy harvesting system. The proposed system adopts a wave glider's propulsion mechanism. A wave glider's blades were mounted on a circular layout and generated a rotational motion. Combining the wave converting system with the wave glider, a mobile floating-type robotic buoy system was developed. It enabled the relocation of the buoy position, as well as station-keeping for long term operation. It had a small size and could efficiently harvest wave energy. A feasibility study and modeling were carried out, and a prototype system was constructed. Various tank tests were performed to optimize the proposed wave energy harvesting system.

• 동의신경정신과학회지
• /
• 제23권2호
• /
• pp.33-48
• /
• 2012

Objectives : This study aimed to assess the effects of incense smokes of 'Cheung-Woon' on the concentration and EEG in healthy individuals. Methods : A total of 48 healthy volunteers participated in this study. The volunteers were examined with K-MAS, CBT(Corsi block tapping task), and EEG before and after smelling the incense smokes of 'Cheung-Woon'. K-MAS measured the recalled words, and CBT measured the recalled positions and orders of the color boxes. EEG measured the relative power of ${\theta}$ wave, ${\alpha}$ wave, SMR wave, mid-${\beta}$ wave, high-${\beta}$ wave, ${\gamma}$ wave and T(concentraion index T = (SMR wave + mid-${\beta}$ wave) / ${\theta}$ wave). 'Cheung-Woon' consists of 7 herbal powder, known as a useful effect on the concentration and memory. Results : After smelling 'Cheung-Woon', K-MAS were increased significantly(p<0.05). In relative power of ${\theta}$ wave, F4, T3, and P4 were decreased significantly(p<0.05) and P3 was also decreased significantly(p<0.01). In the relative power of ${\alpha}$ wave, SMR wave, and mid-${\beta}$ wave, the values were not significant. In the relative power of high-${\beta}$ wave, Fp1, and P4 were increased significantly(p<0.05). In relative power of ${\gamma}$ wave, T3 were increased significantly (p<0.05). In T value, F4, T3, T4, and P4 were increased significantly(p<0.05) and P3 were also increased significantly(p<0.01). Conclusions : This results show that smelling incense smokes of 'Cheung-Woon' is an effective way of increasing concentration and memory.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2006년도 특별논문집
• /
• pp.23-33
• /
• 2006

Generally wave buoy and visual observation are used to measure sea waves. But the wave buoy cannot be applicable for the ship moving in deep sea. So the visual observation has been used for it. But it has several defects and limitation related to environmental condition and observer. To overcome this problem, various wave measurement systems have been suggested. Recently, the wave measurement systems using nautical X-band radar have been developed and extended its application area. In this report, we introduce the wave measurement system, WaveFinder, developed by authors. The system was calibrated and verified with the measurement results of wave buoy. The system was adopted to measure wave condition during sea trials. The system will be a device to support safe navigation in ship's voyage.

• 한국해양공학회지
• /
• 제27권4호
• /
• pp.55-61
• /
• 2013

The numerical simulation using LES-WASS-3D is developed to investigate the wave run-up on the revetment along the canal. Interaction of ocean wave, current, and Kelvin wave is investigated on 40 conditions varying the number of ship, cruising direction, and relative cruising location of ships, when a 650TEU container cruises in the canal. The mean wave run-up heights on the revetment are compared for every simulated conditions. The largest height of wave run-up is generated at the C-pair condition and the wave run-up generated at the canal entrance is larger than that at the inside canal. When Kelvin waves is interacted with the current, the mean wave run-up height is increased approximate 10% compared with no current condition.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2010년도 학술대회 초록집
• /
• pp.27-27
• /
• 2010

There have been several studies about empirical relation between seismic source parameters(e.g., focal mechanisms, depths, magnitudes, etc.) and T-wave observation. In order to delineate the relation, numerical and theoretical approaches to figure out T-wave excitation mechanism are required. In an attempt to investigate source radiation and wave scattering effects in the oceanic crust on T-wave envelopes, we perform three-dimensional numerical modeling to synthesize T-wave envelopes. We first calculate seismic P- and SV-wave energy on the seafloor using the Direct Simulation Monte Carlo based on the Radiative Transfer Theory, which enables us to take into account both realistic seismic source parameters and wave scattering in heterogeneous media, and then estimate excited T-wave energy by normal mode computation. The numerical simulation has been carried out considering the following different conditions: source types (strike and normal faults), source depths (shallow and deep), and wave propagation through homogeneous and heterogeneous Earth media. From the results of numerical modeling, we confirmed that T-wave envelopes vary according to spatial seismic energy distributions on the seafloor for the various input parameters. Furthermore, the synthesized T-wave envelopes show directional patterns due to anisotropic source radiation, and the slope change of T-wave envelopes caused by focal depth. Seismic wave scattering in the oceanic crust is likely to control the shape of envelopes.

• 한국해양환경ㆍ에너지학회지
• /
• 제7권3호
• /
• pp.137-145
• /
• 2004

제주해역의 상기 파랑분포 특성을 제3세대 파랑모델인 SWAN모델에 의한 시뮬레이션을 통해 고찰하였다. 제주해역은 한국 연안에서 파랑에너지 밀토가 상대적으로 큰 해역으로 파력발전에 적합한 후보지이며, 파력발전 효율은 해역의 파랑특성 인자들에 밀접히 연관되어 있다. 파랑분포는 한국해양연구원의 광역 장기 파랑추산 자료의 월평균 파랑특성을 경계조건으로 1 km 격자의 SWAN모델 시뮬레이션을 통해 획득하였으며, 파랑분포 해석은 유의파고, 평균 파향, 평균 과주기의 계절적ㆍ공간적 변화특성 고찰을 주목적으로 하였다. 유의파고는 겨울과 여름이 우세하며, 지역적으로는 제주도의 서쪽이 동쪽에 비해 유의파고가 높다. 유의파고의 최고치는 겨울에 북서쪽 해역에서 발생하며, 여름철의 남동쪽 해역이 다음으로 우세하고, 봄가을은 전체적으로 파고가 낮으나 분포가 비교적 균일하다. 파향의 분포는 회절의 영향을 받는 배후지역을 제외하면, 여름에는 북서 방향이 지배적이고, 겨울에는 남동 방향이 지배적이다. 파주기는 여름과 겨울철에 길고, 동쪽에 비해 서쪽 해역에서 길게 나타난다. 파주기의 최대치는 겨울에 서쪽 해역에서 발생하고, 여름에는 남쪽 해역의 파주기가 다소 우세하나 비교적 균일한 분포를 갖는다.

• International Journal of Fluid Machinery and Systems
• /
• 제2권2호
• /
• pp.156-164
• /
• 2009

This paper aims to describe the importance of data, data collection methods, parameters to estimate the potential of wave energy and environmental impacts. The technical and economical status in wave energy conversion is outlined. Power and energy efficiency relationships are discussed. Many different types of wave-energy converters have been detailed. The progress in wave energy conversion in Malaysia is reviewed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권8호
• /
• pp.843-848
• /
• 2015

The objective of this study is to observe and optimize a typical ocean environment and reduce wave reflections in the wave flume. In order to generate ocean waves in the wave flume, a combination of a horizontal piston type wave generator and wave absorbers was installed in the channel. Two probes for measuring the wave heights, i.e., wave level gauges, were used to record the continuous variation of the wave surface, the phase difference, and the maximum (crest) and minimum (trough) points of the propagating waves. In order to optimize the shape and size of the propagating waves, several absorption methods were proposed. Apart from an active wave absorption method, we used methods that involved vertical porous plates, horizontal punching plates, and sloping-wall-type wave absorbers. To obtain the best propagating waves, a sloping-wall-type wave absorber was chosen and tested in terms of the constitutive filling materials and the location and shape of the plate. This study also focused on the theoretical prediction of the wave surface, separating them into the incident and reflective components. From the results, it is evident that the wave absorber comprising a hard filling material exhibits a better performance than the absorber comprising a soft material, i.e., the wave absorber can be a strong sink to control the energy of the incoming wave. In addition, larger wave absorbers correspond to lower reflectance because a larger volume can reduce the incoming wave energy. Therefore, at constant absorber conditions, the reflectance of the wave increases as the wave period increases. Finally, the reflectance of the wave was controlled to be less than 0.1 in this study so that the wave flume can be used to simulate an offshore environment.